You searched for: Testkit för miljöanalys

Supplier: Lovibond

Test kit, Sulphide No1 tablet, Mätområde: 0 – 0,5 mg/l S, För apparat: MD600, MD610, MultiDirect and Spectrodirect

Supplier: Lovibond

Test kit, Nickel-51, Nickel-52 reagent test, Mätområde: 0.02 - 1 mg/l, 0.2 - 7 mg/l Ni

Supplier: Lovibond

CHECKIT® Comparator is a compact and handy colorimetric unit which is suitable for both mobile and static analysis work. Supplied with a generous number of different colour scales, it provides the basis for a comprehensive, easy-to use colorimetric analysis system.

Supplier: Lovibond

These kits are mainly designed for water testing (boiling, cooling and domestic water).

Supplier: Industrial Physics

TQC Bresle kit is a chloride test kit that complies with the ISO 8502-6 and ISO 8502-9 standards. The Bresle method is designed to to assess the level of soluble salts using a Bresle patch or Bresle sampler, distilled water and a conductivity meter. The conductivity is mainly directly proportional to the concentration of dissolved chloride ions in the solution. The kit includes all the necessary equipment to execute a Bresle test that will indicate the contamination of soluble salts on blast-cleaned surfaces prior to coating. Included is a conductivity gauge used for the assessment of soluble salt ions as chlorides, sulphates and nitrates.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

The DiaQuant® product line is specifically designed for the dialysis environment to test rinse and feed water, as well as sufficient potency levels of disinfectant when storing dialysis equipment. All tests are simple and fast without any mixing or mess. Our proven technology makes testing reliable and accurate, thus providing a safe environment for your patients.

Supplier: Hach

Glycine reagent for Hach chlorine dioxide determination by DPD/glycine methods.

Supplier: Hach

Pre-dosed reagents for maximum safety.

Supplier: Hach

Pre-dosed reagents for maximum safety.

Supplier: Hach

Test kit, Hardness 2 indicator solution, 100 mL MDB

Supplier: Hach

Cuvette test for the determination or free chlorine, 0,05 to 2,0 mg/L Cl₂ and chlorine dioxide, 0,09 to 3,8 mg/L ClO₂. Pre-dosed reagents for maximum safety.

Supplier: Hach

The kits are used to determine the total hardness level.

Supplier: Hach

The standard anionic surfactant method has several drawbacks:
*Multiple handling steps are time consuming and complicated.
*Large volumes of extraction solvents create a safety and environmental risk.
*The combination of lengthy handling time, glassware maintenance, and solvent disposal adds up to significant costs per test. A standardised cuvette-based extraction and photometric measurement system overcomes all these disadvantages to provide accurate, reproducible results.

Supplier: Lovibond

Comparator 2000+ is a versatile modular system for testing water.

Supplier: Lovibond

Indicator for pH range 7,2 to 8,8 and 1 to 2,6.

Supplier: Honeywell Chemicals

Test kit, Indicator buffer tablets for the determination of water hardness

Supplier: Lovibond

Test kit, Hardness-Calcium, Calcheck tablet, Mätområde: 50 – 900 mg/l CaCO₃, För apparat: MD600

Supplier: Lovibond

Test kit, Urea reagent 2, Mätområde: 0,1 – 2,5 mg/l, För apparat: MD100, MD200, MD600, MD610, Spectrodirect, Multidirect

Supplier: WTW

Crack set 20 for Nitrate (14563, 14542 und 14773) for 90 determinations of total nitrogen in sample materials containing at most 15 mg/L N.

Supplier: Hach

The chlorine dioxide test kit uses the reliable and EPA-accepted DPD method to monitor ClO2 concentration, while eliminating chlorine interference through the addition of glycine.

Supplier: WTW

A wide choice of tests is available, for routine quantitative analysis in different applications, designed for use with WTW spectrophotometers and photometers. The test is automatically recognised by the laboratory instruments (via a barcoding system) and results are displayed in the appropriate units. Due to the different photometer optics, one test may yield different measuring ranges in different instruments; LED photometers may have smaller measuring ranges for the same test.

Supplier: Lovibond

Test kit, Silica reagent, ammonium molybate liquid solution, Mätområde: 2.5 – 25 mg/l SiO₂

Supplier: WTW

A wide choice of tests is available, for routine quantitative analysis in different applications, designed for use with WTW spectrophotometers and photometers. The test is automatically recognised by the laboratory instruments (via a barcoding system) and results are displayed in the appropriate units. Due to the different photometer optics, one test may yield different measuring ranges in different instruments; LED photometers may have smaller measuring ranges for the same test.

Supplier: Lovibond

Test kit, Fluoride tablet, excess aluminium, Mätområde: 0 – 1,6 mg/l

Supplier: WTW

Test kit, Crack set 10 for thermal digestion of heavy metals, sufficient for 100 digestions

Supplier: Hach

They are used for determining lead by the LeadTrak™ Fast Column Extraction method.

Supplier: Lovibond

Indicator for pH range 4,0 to 11.

Supplier: Hach

Powder reagent in sealed package for phosphonate test and total phosphate TNT.

Supplier: Hach

For determination of dissolved oxygen by the Winkler method (azide modification) and buret titration.