Du sökte efter: Blocktermostater

Supplier: Thermo Fisher Scientific

Värmeblock, block, Aluminium, Aluminium block, För: 1,5 ml tubes, Antal hål: 28

Supplier: Cole Parmer

Turn an existing 15,2×15,2 cm hotplate into a heating mantle.

Supplier: OHAUS

Modular blocks are constructed from a solid anodized aluminium block. The close contact of tubes-to-block walls allow for maximum heat retention. Each block has a thermometer well for measuring block temperature.

Supplier: Cole-Parmer

Choose a heater, then blocks to suit your application needs!

Supplier: Cole-Parmer

Quickly concentrate multiple samples in a block at once.

Supplier: Thermo Orion

Conduct environmental and wastewater monitoring with the Thermo Scientific™ Orion™ AQUAfast COD165 Thermoreactor. The COD165 thermoreactor is equipped with an automatic voltage selector for voltages between 90 and 260 V with a frequency of 50 or 60 Hz. Select from five preset work temperatures of 100, 120, 150, 160, 165 °C and four preset run times of 30, 60, 120 minutes or continuous time. Simply place 16 mm round sample tubes into the digestor wells, cover with the hinged safety shield, set the temperature and time and let samples digest.

Supplier: Hach

Block heater/cooler, Hach®, LT 20, Thermostatic block heater, bench-top, 80 % relative humidity, non-condensing, Temp.-område: 10...30 °C

Supplier: Hach

Digital block heaters which can hold one or two heating blocks, units allow cuvettes and reaction vessels to be digested at identical or different temperatures and time settings. Heating blocks enable cuvettes and reaction vessels to be digested at identical or different temperatures and time settings.

Supplier: Cole-Parmer

Safely maintain biological samples.

Supplier: ASYNT

The DrySyn® MAXI 2 L is a stand-alone 2000 ml version of the standard DrySyn MAXI Kit (which alternatively has a 3000 ml base and 2000 ml insert) which comes with heat resistant safety lifting handles.

Supplier: HAEP LABOR

Block Thermostats for two blocks featuring high temperature accuracy, rapid heating times and even temperature distribution. The TH 21 unit features Easy Control for quick and simple sample handling.

Supplier: ASYNT

För kontrollerad kylning av 25 till 1000 ml-kolvar utan mantlade reaktionskärl. Enheterna tillåter aktiv temperaturkontroll från 150 till −30 °C (beroende på cirkulationsspecifikation).

Supplier: Hach

A digestion step often has to be carried out before key parameters can be determined. For these parameters, the LT 200 thermostat complements the LANGE cuvette test system. Two separately controllable heating blocks enable cuvettes and reaction vessels to be digested at identical or different temperatures and time settings. The LT 200 has a digital timer with an automatic switch-off and acoustic signal. Two transparent splash protection lids cover the thermostat while it is heating. The integrated over-temperature feature and the insulated external casing provide additional safety.

Supplier: ASYNT

Sortimentet av DrySyn-block är alternativet till oljebad och värmemantlar. De olika modellerna av DrySyn-block möjliggör säker syntes för en eller flera reaktioner.

Supplier: LABCONCO

All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.

Supplier: JENCONS SCIENTIFIC

Interchangeable blocks are made of high grade, non porous, anodised aluminium. Except the blocks used for plates and slides, all other blocks include positions for a block lifter and calibration thermometer.

Supplier: ASYNT

Värmeblock, block, DrySyn Multi, insats för vialer med 4 platser, för 16 mm-vialer

Supplier: HAEP LABOR

Värmeblock, block, Block, BM 00, without holes, height 25 mm