You searched for: Steriliseringsindikatorer

Supplier: VP Medical Packaging

Steriliseringsindikatorer, Bowie-dick single use test pack (prime-pack)

Supplier: LIOFILCHEM

Biological indicators for validating the sterilisation using steam sterilisation (autoclaves).

Supplier: LIOFILCHEM

Biological indicators for validating sterilisation using steam sterilisation (autoclaves).

Supplier: Texwipe

Steriliseringsindikatorer, Labels, Cleanroom labels, autoclavable, Längd: 50 mm, Bredd: 50 mm

Supplier: LIOFILCHEM

Biological indicators for validating the sterilisation using VHP in isolators.

Supplier: LIOFILCHEM

Biological indicators for validating the sterilisation using steam sterilisation (autoclaves).

Supplier: LIOFILCHEM

Biological indicators for validating the sterilisation using steam (autoclaves), VHP (isolators), dry heat and irradiation processes.

Supplier: 3M MEDICAL

An exposure monitor that securely seals packs, and provides a visual assurance that the package has been exposed to the steam sterilisation process.

Supplier: Brand

This self-adhesive crepe indicator tape turns from white to brown upon autoclaving.

Supplier: 3M MEDICAL

This steam chemical indicator offers a distinct off-white to dark brown/black color change when exposed to steam sterilization.

Supplier: 3M MEDICAL

This chemical indicator tape is designed for use as packaging tape and for the immediate identification of items exposed to dry heat processing.

Supplier: 3M MEDICAL

Integrating indicator for use in determining whether the process conditions necessary for sterilisation were met inside each pack. Can be used in all 118 to 138 °C (245 to 280 °F) steam sterilisation cycles.

Supplier: MICRONOVA

Saturated crepe paper/synthetic poly isoprene adhesive in plastic core. It is a proven method of positively confirming a completed sterilisation cycle in both gravity discharge and vacuum autoclaves. Green indicator lines change to black when proper levels of steam pressure and temperature have been achieved. After use, the tape removes quickly and completely, leaving minimal residue or staining.

Supplier: 3M MEDICAL

Rapid readout biological indicator for EO (ethylene oxide) sterilization.

Supplier: CROSSTEX

Steriliseringsindikatorer, Spore Suspension, Sterilisering: Ånga, Bacillus subtilis, cell line 5230: spore suspension (15 month shelf life), population 10^8/0,1 ml - steam sterilisation process

Supplier: CROSSTEX

Bacillus subtilis strips for monitoring low temperature steam sterilisation processes.

Supplier: CROSSTEX

Steriliseringsindikatorer, Spore Strips, Sterilisering: Ånga, Geobacillus stearothermophilus cell line 7953: traditional spore strip 10⁷ (24 month shelf life) / sterilisation process: steam, Längd: 30, Bredd: 6 mm

Supplier: CROSSTEX

Chemical process indicators provide a fast and consistent visual check on items that were sterilised by EO.

Supplier: DELTALAB

Sterilisation indicator tapes for steam autoclave.

Supplier: CROSSTEX

Spore threads are prepared from Geobacillus stearothermophilus. These are designed to be placed directly into a device and utilised to monitor steam sterilisation process efficacy.

Supplier: 3M MEDICAL

The Electronic Test System (ETS) is a stand alone test device for measurements of the physical parameters of a steam sterilisation cycle providing an accurate temperature, pressure and time measurement.

Supplier: 3M MEDICAL

3M™ Attest™ Rapid Readout Biological Indicators 1295 for vaporised hydrogen peroxide (VH2O2) sterilisation provide faster results.

Supplier: 3M MEDICAL

The 3M™ Comply™ Steam Chemical Indicator 1251 is a paper strip 1,5 cm wide by 20 cm long printed with a chemical indicator ink that turns from red to green when exposed to the steam sterilisation process.

Supplier: 3M MEDICAL

3M™ Attest™ Biological Monitoring Systems are true biological indicators, in self-contained indicator capsules. They enable checks on the biological reliability and performance of each steriliser without laboratory facilities and laboratory trained personnel.

Supplier: 3M MEDICAL

Four-hour, green cap, Rapid Readout Biological Indicator for EO Sterilization . Biological indicators and test packs that monitor the effectiveness of the EO sterilisation process and provide results within four hours.

Supplier: 3M MEDICAL

This auto-reader for steam, 390, is designed to incubate and automatically read the biological indicators for steam at 60 °C for a final fluorescent result.

Supplier: 3M MEDICAL

These chemical integrators are Class 5 integrating indicators used for pack control as a method for monitoring sterilisation process conditions inside each pack. They can also be used inside a process challenge device (PCD) to release processed items, excluding implants (load control), however they do not replace the use of biological indicators.

Supplier: CROSSTEX

Spore discs are used to monitor the plasma/vaporised hydrogen peroxide sterilisation processes. Place the spore discs either directly into the chamber or positioned in areas of a device which are the most difficult to sterilise or distributed throughout rooms and isolators.

Supplier: 3M MEDICAL

Twenty four minute Biological Indicator Challenge Pack for 132°C (270°F) 4 minute and 135°C (275°F) 3 minute Dynamic Air Removal Steam Sterilization. Each pack contains one 3M™ Attest™ Super Rapid Readout Biological Indicator 1492V.

Supplier: CROSSTEX

Inoculated carrier mini spore discs for monitoring EO and dry heat processes.