Du sökte efter: Glasfiberfilter

Supplier: VWR Collection

Bindemedelsfria glasfiberfilter med hög flödeshastighet, hög belastningskapacitet, stor temperaturtålighet och utmärkt retention av fällningar.

Supplier: Whatman products (Cytiva)

These glass microfibre filters made from borosilicate glass are strengthened with an organic binder to provide high mechanical stability.

Supplier: Cytiva (Formerly Pall Lab)

Superior grade glass fibre filters for a variety of air sampling methods. Used in a variety of sample clean-up, prefiltration and analytical testing applications.

Supplier: Cytiva (Formerly Pall Lab)

Låga halter av extraherbara ämnen, bindemedelsfria filter av borosilikatglas. Lämpar sig för användning enligt EPA 1311 Toxicity Characteristics Leaching Procedure och för förfiltrering av HPLC-prover.

Supplier: Cytiva (Formerly Pall Lab)

Mångsidiga filter som är unikt lämpade för ett brett utbud av luftövervakningstillämpningar.

Supplier: Sartorius

Quartz microfiber filters are free of glass fibers and binding agents.

Supplier: Merck

ORBO™ 80 is a glass fiber filter coated with 1-(2-pyridyl)piperazine.

Supplier: Whatman products (Cytiva)

Whatman™ QM-H is a pure quartz fibre filter for use in testing acidic gases, stacks, flues and aerosols. It has low heavy metal content so it is well suited for heavy metals analysis.

Supplier: Whatman products (Cytiva)

These microfiber filters made from borosilicate glass are suitable for water and wastewater analysis, with extremely fine particle retention and added strength.

Supplier: Merck

Made of very pure quartz fibers with no glass fibers or binders. This makes these filters well suited for measuring heavy metal concentrations and small amounts of particles (such as the USEPA PM 10 ambient air monitoring method). The filters also exhibit good weight and form stability.

Supplier: Whatman products (Cytiva)

These high purity quartz microfibre filters are used in many air sampling filter applications, including sampling of acidic gases, stacks, flues and aerosols. They are suitable for PM-10 sampling and analysis.

Supplier: Merck

Millipore fibrous disc filters are available in a wide range of flow rates and throughput capacities. Our glass fibre filters are available with or without binder resins and can be sterilised by EO, gamma, or autoclave (121 °C at 1 bar).

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are fine membrane filters that can also function as a prefilter when used with GF/B.

Supplier: Whatman products (Cytiva)

These high purity QM-B quartz fibre filters are designed for use in specific air monitoring applications.

Supplier: Whatman products (Cytiva)

HGF61 glass fibre tape provides strength, efficiency, reliability and consistency of data quality in continuous air monitoring.

Supplier: Whatman products (Cytiva)

These EPM 2000 air filters are used in high volume PM-10 sampling equipment. Manufactured from 100% pure borosilicate glass, they enable detailed chemical analysis of trace pollutants with minimal interference.

Supplier: Merck

Millipore filters with binder resin have superior wet strength and are excellent for qualitative analysis and prefiltration, especially for heavily contaminated liquids. They are also widely used for clarification of aqueous solutions.

Supplier: Whatman products (Cytiva)

Cytiva's Whatman TCLP test filters are acid-treated with low metal content. They support TCLP testing by providing accurate information about TCLP limits to ensure the best possible disposal plan can be put into action.

Supplier: Whatman products (Cytiva)

These 934-AH™ RTU grade filter papers have been pre-washed, dried (or ignited), cooled, desiccated and weighed, which eliminates the pre-treating steps that are otherwise required by the US EPA Laboratory Standard Method 2540 parts C, D, and E. These filter papers are widely used for dissolved, suspended and volatiles solid analysis. They are also used as a wastewater filter for a wide range of water monitoring applications including the monitoring of rivers, lakes and coastal waters, as well as analysing purified discharge of wastewater treatment plants and monitoring discharge water from industrial plants.

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are ideal for measuring landfill leachate composition with a TCLP test. They can also be used for DNA binding and purification, filtering finely precipitated proteins and filtering biochemical solutions, fluids, and nucleic acids.

Supplier: Whatman products (Cytiva)

These glass microfibre filters made from borosilicate glass are used for filtration of coarse particles. They offer faster filtration and a higher air flow rate compared to the similar grade GF 9 filters.

Supplier: Sartorius

Binder free glass microfibre filters are made of 100% borosilicate, are highly pure and extremely white. They are recommended for analytical and gravimetric analyses and also as prefilters. These filters combine fast flow rates with high load capacity and the retention of very fine particles.

Supplier: Whatman products (Cytiva)

Whatman Grade GF 92 glass microfiber filters from Cytiva are designed for prefiltration in order to protect against membrane fouling. Grade GF 92 is strengthened with an inorganic binder.

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are particularly useful for liquid clarification and liquid scintillation counting.

Supplier: Merck

The filters without binder resin retain their structural integrity without weight loss when heated up to 500 °C and can therefore be used in gravimetric analysis as well as for the filtration of hot gases.

Supplier: Whatman products (Cytiva)

These borosilicate glass papers are designed for use when drying samples during moisture assessment.

Supplier: Sartorius

These 100% high-purity quartz microfibre filters are free of glass fibres and binding agents. They are especially suited for emission monitoring at temperature of up to 900 °C and wherever filters of the highest purity are needed.

Supplier: Whatman products (Cytiva)

GMF 150 prefilters are multilayer graded density filters for rapid and efficient filtration of samples with high solids content. They are designed with a course top layer (10 µm) and meshed with a finer layer of 1 or 2 µm. Manufactured from 100% borosilicate glass microfibre, the filter is binder free. It is an excellent prefilter for higher particulate loading capacity with faster flow rates.

Supplier: Whatman products (Cytiva)

Grade GF/A card-mounted filters are used in static sample and personal air sampler applications. These aerosol sampling and particulate monitoring filters provide high flow rates and minimal sample interference.

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are widely used as total suspended solids filters for applications testing both potable water and waste water. GF/C can also function as a filter for liquid scintillation counting, cell harvesting, industrial waste analysis and binding assays that require high loading capacity.