Du sökte efter: Infärgningsmedel
Reagenser, färgämnen och färgningsmedel änvands inom mikroskopi för att markera och analysera specifiska strukturer i celler eller vävnadsprover. Färgämnen skapar starka kontraster mellan cellkomponenter för enklare detektering eller analyser. Vilken sort färgämne man ska använda variera mellan olika prover. Våra ready-to-use färgämnen möjliggör manuellt hantering eller användning med automatisk utrustning.
Non-aqueous DPX mounting medium
Supplier: Merck
DPX new is a synthetic non aqueous mounting medium for microscopy. In its formulation, the teratogenic plasticiizer dibutyl phthalate (DBP) has been avoided, which renders the composition safer for the environment and more user friendly than the conventionally used mounting agents such as DPX.
Expand 1 Items
Eukitt® mounting medium
Supplier: SIGMA ALDRICH MICROSCOPY
This is a mounting medium (contains 45% acrylic resin and 55% xylenes) used in microscopy. It is an adhesive and specimen preservative that can be used manually and in automated coverslipping equipment. Special purpose adhesive and sealant for use with glass, non plastic and other non-reactive materials.
Expand 2 Items
Aqueous mounting medium, Fluoromount™, Sigma-Aldrich®
Supplier: SIGMA ALDRICH MICROSCOPY
Fluoromount™ Aqueous Mounting Medium for use with fluorescent dye-stained tissue.
Expand 1 Items
Neutral mounting medium, DPX, Sigma-Aldrich®
Supplier: SIGMA ALDRICH MICROSCOPY
D.P.X mounting medium is a mixture of distyrene (polystyrene), a plasticizer (tricresyl phosphate), and xylene. It facilitates the protection of stains and can dry quickly.
Expand 1 Items
Aqueous mounting medium, Fluoroshield™ with DAPI, Sigma-Aldrich®
Supplier: SIGMA ALDRICH MICROSCOPY
Fluoroshield™ with DAPI is an aqueous mounting medium for preserving fluorescence of tissue and cell smears.
Expand 1 Items
Differentiation Solution
Supplier: SIGMA ALDRICH MICROSCOPY
Differentiation solution comprises acidified ethanol or isopropanol that is used to decolourise hematoxylin stain. The duration of exposure to the solution determines the degree of decolourisation. Differentiation is a crucial step in hematoxylin-eosin staining to achieve the proper colour contrast necessary for visualisation, by selectively removing excess hematoxylin from the tissue section and leaving behind the desired staining intensity.
Expand 1 Items
Sigma-Aldrich® Bouin's solution
Supplier: SIGMA ALDRICH MICROSCOPY
Bouin's solution is an excellent fixative for preserving soft and delicate structures. It is prepared with saturated picric acid, formaldehyde and acetic acid.
Expand 2 Items
Mountant for histology, DPX, Sigma-Aldrich®
Supplier: SIGMA ALDRICH MICROSCOPY
DPX Mountant for histology has been used as a slide mountant to fix sections.
Expand 2 Items
VWR® VividPro™ Fluorescent Stains
Supplier: VWR Chemicals
VividPro™ is a generic fluorescent stain for protein gel electrophoresis that can be used to visualize proteins.
Expand 2 Items
Monteringsmedia
Supplier: Merck
Den definierade hårdheten och enhetligheten hos materialet som ska skäras är viktiga faktorer för att erhålla en jämn skärningskvalitet. Dessa krav kan uppfyllas med en rad lämpliga ämnen, som paraffiner, hartser, gelatin och celloidin.
Expand 2 Items
Immersion oil for microscopy, Sigma-Aldrich®
Supplier: Merck
Used to increase lens effectiveness
Expand 4 Items
Immersion oil for microscopy, Sigma-Aldrich®
Supplier: SIGMA ALDRICH MICROSCOPY
Immersion oil is used for high resolution (1000X) light microscopy work under oil immersion objective lens.
Expand 3 Items
Aqueous mounting medium, Fluoroshield™ with 1,4-Diazabicyclo[2.2.2]octane, Sigma-Aldrich®
Supplier: SIGMA ALDRICH MICROSCOPY
Fluoroshield™ with 1,4-Diazabicyclo[2.2.2]octane is an aqueous mounting medium for preserving fluorescence of tissue and cell smears.
Expand 1 Items
Xylene substitute, Neo-Clear®, Sigma-Aldrich®
Supplier: Merck
Neo-Clear® is a non hazardous alternative to xylene. It is virtually odourless, compatible with most high purity solvents and is characterised by lower evaporation rates than xylene, making it a lower health risk.
Expand 2 Items
Immersion oil viscosity 1,250 cSt (lit.), Sigma-Aldrich®
Supplier: SIGMA ALDRICH MICROSCOPY
Immersion oil has been used in epifluorescent microscopy and cell identification.
Expand 2 Items
HistoChoice® Clearing agent, Sigma-Aldrich®
Supplier: SIGMA ALDRICH MICROSCOPY
HistoChoice® is a patented, complex mixture of agents that allow tissues to retain their structure, antigenic sites and nucleic acid sites. This formulation in non-citrus, contains no mercury, formaldehyde or glutaraldehyde.
Expand 1 Items
Spurr low viscosity embedding kit, Sigma-Aldrich®
Supplier: SIGMA ALDRICH MICROSCOPY
Spurr resin is a hydrophobic resin. It is less viscous than epon mixtures and is easier to dispense. The low viscosity of the resin contributes to its penetration in tissue, mineral and dense structures. A low viscosity of 60 cps also allows easy penetration into a variety of difficult materials.
Expand 1 Items
Mounting medium, Entellan® new
Supplier: Merck
Entellan® new is a new mounting medium for cover slippers and is specially suited for commercial automated mounting instruments that operate with cover slippers. Its viscosity ranges between 250 and 600 mPas, 1,00869 has a small viscosity range. This narrow viscosity range improves and accelerates the application, as neither the dropping rate nor the volume need to be reset after the first run with a new bottle of Entellan® new.
Expand 3 Items
Water-free mounting medium, Neo-Mount®
Supplier: Merck
Water-free mounting media, such as Neo-Mount®, should be used for permanent mounting and long-term storage of samples. Slides processed in pathologyl laboratories need to be stored up to 10 years, whereby the staining results need to be stable and fading-out is not acceptable. Neo-Mount®, anhydrous mounting medium for microscopy is an extremely colour-stable mounting medium for microscopy, which is produced with solvents based on mixtures of aliphatic hydrocarbons. It contains an aromatic-free substitute for xylene, thus, Neo-Mount® needs to be combined with Neo-Clear® exclusively. Xylene must be avoided in the mounting step, as it will cause the slides to become cloudy and streaked. In addition, by placing the dehydrated slides on filter paper for approx. 1 minute prior to mounting, any excess Neo-Clear® should be circumvented, as air bubbles might arise under the cover slip. The same pre-condition should also be met when mounting specimens using cover slip machines; in this area, Neo-Clear® can be most efficiently eliminated by incubating the slides for 1 minute in an empty slide rack.
Expand 2 Items
Aqueous mounting medium Aquatex®, Sigma-Aldrich®
Supplier: Merck
Aquatex is used for e.g. LEUCOGNOST stained specimens. For preservation purposes and subsequent optimal microscopy, the stained sections are normally mounted using a suitable mounting agent and covered with a cover glass.
Expand 1 Items
Mounting Medium, CC/Mount™
Supplier: SIGMA ALDRICH MICROSCOPY
CC/mount is an aqueous based permanent mounting medium with a very high refractive index, which when applied to the stained tissue sections can store the tissue specimens permanently without the fading of the chromogens. Because of the superior refractive index of CC/mount, tissues mounted in this medium look like specimens mounted with organic based mounting media. No coverslipping is required with CC/mount. However, if coverslipping is required, dried CC/mount can be post mounted by using an organic based mounting medium. CC/mount permits the long-term storage of antigens localised using organic insoluble chromogen substrates, including AEC, DAB, Fast Red, BCIP/NBT, BCIP/INT and fluorescent dyes like FITC and phycobiliproteins. The high pH of CC/mount ensures increased stability of fluorescence intensity.
Expand 1 Items
Epoxy Embedding Medium Kit
Supplier: SIGMA ALDRICH MICROSCOPY
The Epoxy Embedding Medium Kit is a very widely used embedding medium for electron microscopy. The embedding formulation originally published by Luft (1961) is excellent for both plant and animal tissues. Due to the low viscosity of the resin, it penetrates the tissue specimen faster than Araldite and other polymers. It hardens easily and uniformly at low temperatures with the addition of dodecenylsuccinic anhydride (DDSA), methyl nadic anhydride (MNA), and the accelerator 2,4,6-tris(dimethylaminomethyl)phenol (DMP-30). Slight shrinkage may occur during curing. This kit is useful for embedding a variety of tissues as a wide range of hardness can be obtained with this resin to suit a specific tissue type by using two different anhydride curing agents (DDSA and MNA).
Expand 1 Items
Osteo-Bed Bone Embedding Solvent
Supplier: SIGMA ALDRICH MICROSCOPY
For use with Osteo-bed bone embedding kit. Solvent for removal of plastic from sections prior to rehydration and staining. Most histochemical and immunohistochemistry staining protocols require the removal of methyl methacrylate (MMA) and rehydration of mounted sections for improved stain penetration and greater contrast.
Expand 1 Items
Avkalkningslösning, OSTEOMOLL® och OSTEOSOFT®
Supplier: Merck
Hard tissue like bones or teeth, and all specimens of calcified tissue like bone marrow punches require special pre-treatment before routine processing by a histological laboratory.
Expand 4 Items
Mounting medium, kaiser's glycerol gelatine, phenol-free
Supplier: Merck
Kaiser's glycerol gelatin is an aqueous mounting medium for microscopy and works well with specimens prepared for enzyme, lipid, and immunohistochemistry determinations.
Expand 1 Items
Aqueous mounting medium, glycerol gelatin, Sigma-Aldrich®
Supplier: SIGMA ALDRICH MICROSCOPY
Glycerol alters the hygroscopic property of gelatin and its permeability to water vapour. Glycerol gelatin or glycerine jelly medium is an aqueous slide mounting media, used for mounting samples in microscopy and histology.
Expand 2 Items
Immersion oil viscosity 150 cSt (lit.), Sigma-Aldrich®
Supplier: SIGMA ALDRICH MICROSCOPY
Immersion Oil has a defined refractive index of about 1,516. It is important that the refractive index (nD) is about 1,5, similar to that of glass. This enables a homogeneous oil immersion to be achieved.
Expand 2 Items
Osteo-Bed Bone embedding kit, Sigma-Aldrich®
Supplier: SIGMA ALDRICH MICROSCOPY
Suitable for use with large and small mineralized (undecalcified) bone sections. Yields clear, hard blocks for cutting sections. Not water-soluble.
Expand 1 Items
Zinc Formalin Fixative
Supplier: SIGMA ALDRICH MICROSCOPY
Zinc formalin fixative is a non-precipitating fixative. This fixative is compatible with histochemical, immunochemical and special stains. It may be used with automated tissue processors and also in manual methods. The zinc chloride component of the formulation increases the rigidity of cellular components to withstand subsequent processing, sectioning and staining procedures. Tissue specimens initially fixed using 10% neutral buffered formalin solution may be post-fixed using the zinc formalin fixative.
Expand 1 Items
Embedding medium, PolyFreeze, Sigma-Aldrich®
Supplier: SIGMA ALDRICH MICROSCOPY
PolyFreeze is a water-soluble support matrix and a form of embedding medium for frozen sectioning. PolyFreeze sections flawlessly at routine frozen specimen thickness of 5-6 μ and leaves no slide residue. It provides for -20 ºC cryostat sectioning in rapid set embedment. This medium freezes quickly supporting the tissue for sectioning at 3 mm and up with no cracking of the matrix at temperatures from -8 °C to -25 °C.