Handsboxar

Supplier: LABCONCO

This combination glove box with fibreglass lining provides inlet and outlet HEPA or ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment.

Supplier: Bohlender

Aluminum frame with panels made of conductive polycarbonate. Base made of conductive polyethylene. Front panel with four access openings and two pairs of size 9,75 gloves made of conductive EPDM, three cable entry points on the rear (right/center/top left). Two airlocks (right and left) each with two doors, outer doors with latches to prevent accidental opening. When the door is opened, a tray extends into the work area for easy removal of inserted products. The work area and airlocks each include two hose connections for gassing and ventilation, as well as suitable hoses (3×5 m gassing hoses made of PVC and 3×5 m ventilation hoses made of PE). All materials used are capable of dissipating electrostatic charges via a grounding cable that can be connected to the rear (M6 connection thread).

Supplier: Bohlender

Aluminium frame with panels made of borosilicate glass, front panel with two glove ports, right side panel and bottom side of base panel made of aluminium, top side of base panel made of stainless steel. Including one pair of natural rubber gloves size 9, two lead-ins for cable on the back side (upper left and upper right). Transfer chamber with two doors, external door with latch to prevent accidental opening, the tray extends into the workspace with opening of the internal door for easy removal of inserted products. Work space and transfer chamber each including two hose connectors for gas-filling and aeration and appropriate tubing (2× 5 m tubing for gas-filling made of PVC, 2× 5 m aeration tubing made of PE).

Supplier: Bohlender

This PMMA glove box allows safe working with sensitive compounds in a controlled environment.

Supplier: Bohlender

Aluminium frame with panels made of acrylic glass, base panel made of polyethylene. Front and back side with one door each, two pairs of opposite glove ports each with one pair of natural rubber gloves size 9, two cable lead-ins (left bottom side). Transfer chamber (right) with two doors, external door with latch to prevent accidental opening, the tray extends into the workspace with opening of the internal door for easy removal of inserted products. The tray is only operable from one workstation side (front right-hand). Work space and transfer chamber including two hose connectors for gas-filling each and appropriate tubing (2×5 m tubing for gas-filling made of PVC and 2×5 m aeration tubing made of PE).

Supplier: Bohlender

This normal pressure glove box features a robust yet lightweight aluminium frame with panels made of acrylic glass which ensures superb all-round visibility. Base panel, integrated connector for exhaust system and closing lid are made of polyethylene, Iris-Ports and cable lead-ins are made of polyethylene and silicone.

Supplier: Bohlender

Aluminium frame with panels made of acrylic glass, base panel made of polyethylene. Front panel with two glove ports and one pair of gloves size 9,75 made of UV-resistant EPDM. Transfer chamber with two doors on the right, external door with latch to prevent accidental opening, the tray extends into the workspace with opening of the internal door for easy removal of inserted products. Integrated ultraviolet lamp with life-time monitoring on the top side for air and surface disinfection in the workspace, exchangeable lamp. The ultraviolet lamp is an ozone-free radiation source that does not emit any radiation below 220 nm. Electrical power connection 230 V/50 Hz is required.

Supplier: LABCONCO

These glove boxes with stainless steel liner provide inlet and outlet HEPA or ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials. Available with two or four glove ports (double version).

Supplier: LABCONCO

This filtered glove box with fibreglass liner provides inlet and outlet HEPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials. The glove box may also be appropriate for use as a containment isolator for applications that include compounds assigned ISO 4 and ISO 5 Banding Levels.

Supplier: Thermo Fisher Scientific

These polyethylene glove bags are ideal for laboratory use and field sampling.

Supplier: Bohlender

Aluminium frame with panels made of acrylic glass, base panel made of polyethylene. Front side with four glove ports and two pairs of natural rubber gloves size 9, three cable lead-ins on the back side (upper right, middle, left). Two transfer chambers (right and left) with two doors each, external doors with latch to prevent accidental opening, the tray extends into the workspace with opening of the internal door for easy removal of inserted products. Work space and transfer chambers including two hose connectors for gas-filling each and appropriate tubing (3×5 m tubing for gas-filling made of PVC and 3×5 m aeration tubing made of PE).

Supplier: Bohlender

Suitable for all SICCO glove boxes.

Supplier: LABCONCO

These glove boxes provides a leak-tight environment to perform work with contamination-sensitive materials under vacuum or in an inert environment.

Supplier: LABCONCO

Replacement HEPA filter, 99,99% efficient on 0,03 micron particulates; for use with 5441400 or 5441403 kit

Supplier: Bohlender

This anti-static glove box made of PC-ESD allows safe working with sensitive compounds in a controlled environment.

Supplier: Bohlender

Aluminium frame with panels made of acrylic glass, base panel made of polyethylene. Front side with three glove ports and two pairs of natural rubber gloves size 9, three cable lead-ins on the back side (upper right, middle, left). Transfer chamber (right) with two doors, external door with latch to prevent accidental opening, the tray extends into the workspace with opening of the internal door for easy removal of inserted products. Work space and transfer chamber including two hose connectors for gas-filling each and appropriate tubing (2×5 m tubing for gas-filling made of PVC and 2×5 m aeration tubing made of PE).