696 Results for: "PHYWE"

Supplier: PHYWE

Divers of glass, placed in a bottle filled with water. If the liquid pressure increases, water flows into the diver, whose average density increases. This results in the diver sinking to rise again towards the surface when the pressure is reduced.

Supplier: PHYWE

Tubular glow lamp of glass. With conical contact hats at the ends. Used, inter alia, to determine the polarity of charge, because light only occurs around the negative electrode. Ignition voltage approximately 80 V, switching voltage approximately 65 V. For example, connects with crocodile clips.

Supplier: PHYWE

The profile of the runway has been designed so that the experiments can be performed easily, quickly and safely. The length of the track (1,5 m) is more than sufficient for all conceivable physical experiments to be performed. The trolleys are equipped with overload protection in the form of a recessed, resilient wheel suspension. Characteristics.

Supplier: PHYWE

Contains 50 different components including detailed instructions. Delivered in a plywood box, 31 different attempts are described in the manual, e.g. Examples of experiments:

Supplier: PHYWE

Tripod rods with square cross section 12×12 mm. Made of galvanized galvanized steel pipe. One end of the rod is provided with a cylindrical rod (50×10 mm). The other end closed. Square rods provide unmatched torsional rigidity compared to cylindrical frame rods.

Supplier: PHYWE

Only 50 components.

Supplier: PHYWE

For measuring low currents AC/DC and DC voltages AC/DC eg Hall voltages and thermal voltages. High sensitivity and very good electrical stability. Well shielded from disturbing voltages. Overload protected up to 220 V AC/DC. The front is equipped with two scales 0 to 3 and 0 to 10 both with fine division, measuring area window and automatic function indication. The back is equipped with a function switch, measuring range switch, pushbutton for zero setting and steering wheel for electrical zero adjustment. There is also a printer connection.

Supplier: PHYWE

With a few simple steps, the ballistic pendulum is quickly rebuilt into a throwing device with a variable/variable firing angle. The ballistic pendulum, a common method for determining the speed of a pistol bullet, is to push them into a sandbag. With the ballistic pendulum, a harmless variant of this experiment can be performed in the classroom.

Supplier: PHYWE

With the equipment, centrifugal forces that arise during a body's rotation around a specific axis can be measured and examined. The device consists of a plane with a path for a cart. On the underside there is a vertical shaft that is mounted in a bearing. The plane is made to rotate with a laboratory motor connected with a drive belt to the bearing. The experimental trolley is placed on the track and prevented from leaving the track by two bent steel wires. A wire is connected to the trolley that runs over a pulley and on to a dynamometer.

Supplier: PHYWE

Equipment for demonstration of the quantum properties of the electric charge, as well as to determine the elementary charge. The experiment is easy to perform and suitable for both laboratory and demonstration using the Videoflex camera (765-1000). With the equipment, the elemental charge can be determined in 3 ways: change of charge by means of an alpha radiator, falling and rising speed with constant capacitor voltage and free voltage and falling speed without electric field.

Supplier: PHYWE

For demonstration of the rocket principle. The model is half filled with water and placed on a launch pad. An internal overpressure is inflated with an air pump. The rocket is released manually and then flies freely longer than 40 m. Can also be propelled with a carbon dioxide cartridge along a tensioned line. The rocket's traction force, with carbon dioxide cartridge as the driving source, can be measured with a dynamometer and amounts to about 0.3 N.

Supplier: PHYWE

Especially suitable for electrostatic experiments with very high demands on high, precise and adjustable DC voltage. The voltage is stabilised by electronic control.

Supplier: PHYWE

Used in studies of the power action of a current-carrying conductor in a magnetic field. The field can e.g. obtained from U-magnet 765-0444. With two bands, the force action between these at different current directions can be investigated. Each band is provided at both ends with a 4 mm banana plug.

Supplier: PHYWE

For electrostatic experiments, for example, determination of the charge of a sphere and induction experiments. Hollow surface-treated brass sphere equipped with 4 mm holes for connecting banana connectors.

Supplier: PHYWE

Made of cast, lacquered zinc alloy. Equipped with rubber feet with level control on all three legs. Fits tripod rods with a diameter of 6 to 14 mm.

Supplier: PHYWE

Suitable for use as pendulum bobs for frequency experiments. Hardened and polished ball bearings with eyelet.

Supplier: PHYWE

With equipment, demonstration and accurate calculations can be performed of how the atom's spectral lines are divided by the influence of a magnetic field (the Zeeman effect).

Supplier: PHYWE

The following experiments can be performed.

Supplier: PHYWE

Apparatus for demonstrating the independence of the components of a composite motion. A force is exerted against an arrow, in the direction of a vertically set target, by means of a wire connected to an elastic band. When the arrow is released, the target is released at the same time. The arrow always hits the free-falling target, regardless of the position from which the arrow is released. Supplied with wooden plate with mounted strap, spring lock for attaching the target, arrow with string (approx. 275 cm) and target.

Supplier: PHYWE

Power source for all electrostatic experiments and for operating spectral and gas discharge tubes. The unit provides three continuously variable DC voltages isolated from ground. Two of the voltages are connected in series of 0 – 5 kV, giving a total voltage of 0 – 10 kV. Voltage polarity can be positive or negative. Digital 3-digit display and switchable to the desired socket with switching dials with LED marks the selected outlets.

Supplier: PHYWE

Equipment for demonstrating photoelectric power and determining Planck's constant. A photocell is equipped with filters that only transmit light of a certain wavelength. The photocell is illuminated with light from a Hg lamp. The potassium cathode then emits electrons that pass over to the unlit anode. Over time, a voltage arises that prevents new electrons from reaching the anode. The resulting voltage is measured with a measuring amplifier and a voltmeter. The measurement is repeated with filters for different wavelengths. Photocell and Hg lamp are equipped with magnets at the bottom for stable installation on the mounting plate. List of equipment.

Supplier: PHYWE

For demonstration of the function of an electric compression heat pump.

Supplier: PHYWE

PHYWE table optics for laboratory work with mirrors, light refraction, lenses, eye function and light refraction. Content:

Supplier: PHYWE

Detailed description of 31 trials.

Supplier: PHYWE

Equipment for quantitative demonstration of the electron's wave nature and particle properties. At high electron energy, interference can be observed and evaluated in the form of Debye-Scherrer rings. The Broglie equation and Bragg's conditions can be proved. At low electron energies, the paticle properties of the electron can be demonstrated in a manner similar to geometric optics.

Supplier: PHYWE

Supplementary kit for table optics 765-1317. Content:

Supplier: PHYWE

Apparatus for detecting that the pressure at the bottom of a container does not depend on its design, but only on the liquid level. For quantitative determination of the hydrostatic pressure and examination of the linear relationship between pressure and liquid level. The liquid pressure at the bottom of the various vessels deforms a highly elastic rubber membrane whose movement is transmitted to a centimeter-graded needle. The deviation can be compensated with weights. The mass and distance of the weight from the pivot point make it possible to quantitatively determine the pressure change. A second pointer can be mounted vertically to visualize fluid level.

Supplier: PHYWE

Supplementary kit for Painting Mechanics 1. Contains 11 components with which a further 18 experiments can be performed in the areas of motion, energy forms and the mechanics of liquids and gases. The experiments assume that components are used from the Tavelmekanik 1 kit. Examples of experiments:

Supplier: PHYWE

Quincke interference tube for determining wavelengths and frequencies by interfering with sound waves in air. Consists of two U-shaped metal tubes slidable into each other with a measuring scale. Inputs and outputs with knobs. Three brackets for mounting on a stand. Comes with listening hose.

Supplier: PHYWE

Precision Dynamometers with fine tuning for both tensile and compressive forces.