UHP nitrogen generators

Supplier: PARKER HANNIFIN

Gas generator for gas chromatography. Produces nitrogen from compressed air.

Expand 3 Items

Membrane nitrogen generators have no moving parts, require no electricity and make no noise. Recommended and used by many sample concentrator and sample evaporator manufacturers. The unit produces nitrogen at a flow rate of 200 L/min from any standard laboratory compressed air source.

Expand 1 Items

Zero air generators

Supplier: PARKER HANNIFIN

Designed as a compact, hazard free, lower cost alternative to the user of expensive high pressure gas cylinders in the laboratory. Replacing cylinders with a gas generator brings advantages: increased safety, greater convenience, reduced cost and higher purity gas for more accurate analysis.

Expand 5 Items

FT-IR purge gas generators

Supplier: PARKER HANNIFIN

These purge gas generators are specifically designed for use with FT-IR Spectrometers to provide a purified purge gas and air bearing gas from compressed air. The generators supply carbon dioxide-free air at less than −70 °C dew point with no suspended impurities larger than 0,1 µm. They are also ideally suited for use with CO₂ -analysers and Matrix GCs in addition to supplying other laboratory instruments.

Expand 4 Items

Mixing Systems, SpinBag

Supplier: PARKER HANNIFIN

Parker's compact SpinBag Mixing System offers the advantages of single-use in a bench top mixing solution.

Expand 2 Items

LC-MS nitrogen generators

Supplier: PARKER HANNIFIN

Membrane nitrogen generators have no moving parts, require no electricity and make no noise. This keeps installation and maintenance to a minimum and the high degree of reliability ensures maximum instrument ‘up time'.

Expand 4 Items

Flow controllers

Supplier: PARKER HANNIFIN

For regulating and distributing the clean air output from a Parker compressed air dryer, FT-IR purge gas generator or self contained lab gas generator. Manifold and single flow types are available. Manifold types allow clean gas, at the regulated pressure, into the manifold where independently adjustable flow controls may be set to serve three separate instruments. Single flow types include a pressure regulator and a single flow controller. Each flow controller is equipped with a triple scale pressure gauge for 0 - 7 bar (psig, kg/cm²), a pressure regulator and a flow meter mounted on a convenient bracket for wall or panel mount installations.

Expand 5 Items

Maintenance kit

Supplier: PARKER HANNIFIN

Maintenance kit for nitrogen generator models N2-14, N2-22, N2-35, N2-14A, N2-22A and N2-35A.

Expand 1 Items

Hydrogen generators

Supplier: PARKER HANNIFIN

These generators produce ultra high purity hydrogen from deionised water on demand.

Expand 6 Items

Biopharm pressure sensors, SciLog®

Supplier: PARKER HANNIFIN

SciLog® range of pre-calibrated, single-use sensors, can measure and document pressure in a range of filtration, separation and purification applications.

Expand 2 Items

Installation kit for gas generators

Supplier: PARKER HANNIFIN

Installation kit

Expand 1 Items

Plug and play LC/MS nitrogen generator, NitroFlow Lab

Supplier: PARKER HANNIFIN

Membrane nitrogen generator has no moving parts and makes no noise. This keeps installation and maintenance to a minimum and with a high degree of reliability ensures maximum instrument 'up time'. Ideal for all manufacturers LC/MS systems.

Expand 1 Items

Membrane air dryers

Supplier: PARKER HANNIFIN

Water vapour from the compressed air supply passes through the membrane's hollow fibres. At the same time a small portion of the dry product air is redirected to sweep out water vapour, which preferentially passes through the hollow fibres. The degree of drying is controlled by varying the compressed air throughput. Moisture laden sweep gas is vented to the atmosphere and the clean, dry air is supplied to the intended application.

Expand 1 Items

Nitrogen generator for ELSD

Supplier: PARKER HANNIFIN

Ideal for nebulising gas for ELSD. Membrane nitrogen generators have no moving parts, require no electricity and make no noise. This keeps installation and maintenance to a minimum and with a high degree of reliability ensures maximum instrument ‘up time'.