Supplier: Hospidex

Super elastic plunger is made of special Ti-Ni alloy which has superior flexibility and it does not have any problem with friction damage caused by plunger bending. It simply springs back, if the plunger is bent.

Supplier: Trajan Scientific and Medical

The XCHANGE® coupling system secures and locks the syringe in place. This is achieved by a coupling mechanical piece that captures the syringe and a magnet that automatically aligns – eliminating the need for springs, screws or alignment gauges. Once engaged the syringe is locked into position requiring zero holding force.

Supplier: FHP VILEDA SCS

The Origo trolley system has been designed for maximum flexibility and changeability. The user can either choose one of the standard configurations or have the trolley customised exactly to his requirements, and when requirements change so the system can be reconfigured. The 300 series offer the abitility to retro-fit and re-customise the trolley over and over, offering almost limitless possibilities.

Supplier: VARIAN

SPEC SPE solid phase extraction cartridges available in standard straight barrel tube format, offering flexibility in sample size. Use on any standard vacuum manifold such as the Vac Elut 20 or SPS 24.

Supplier: GRANT INSTRUMENTS

Metal pump inlet/outlet connector, dual seal super rapid 8 mm , Semi rigid tubing with outer diameter 8 mm, Temperature range -20 to 100 °C

Supplier: Merck

The selectivity offered by ZIC®-HILIC is suitable for a wide variety of molecules containing hydrophilic or ionisable functional groups. This includes compounds such as carbohydrates, metabolites, acids and bases, organic and inorganic ions, metal complexes, amino acids, peptides, protein digests, plant and cell extracts, plus much more. Such compounds are normally characterised by a small or negative LogP value and have poor retention on reversed-phase columns.

Supplier: VWR Collection

Ferrule, ETFE

Supplier: Avantor

These ferrules hold pressure holding for flat bottom fittings.

Supplier: Avantor

Avantor® ACE®, Replacement ferrules, PEEK

Supplier: Trajan Scientific and Medical

These fittings are composed of a knurled stainless steel nut and a double ended PEEK™ ferrule.

Supplier: Avantor

These flangless ferrules delivers convenience, minimal downtime.

Supplier: Avantor

Natural and M6 single ferrule nuts.

Supplier: PerkinElmer

Syringes must ensure a tight and secure fit in the injection port and withstand repeated injection cycles without bending or breaking.

Supplier: VACUUBRAND

The DCP 3000 is an outstanding vacuum gauge with large illuminated display. The brand new VSP 3000 vacuum sensor is based on thermal conductivity (Pirani) and offers a wide measurement range from atmospheric pressure down to 10 to 3 mbar. The wetted parts are made of chemically resistant plastics (PBT, PUR) and alumina ceramics. It features a much better chemical resistance and ruggedness than conventional Pirani sensors with their fragile metallic spiral-wound filament. Simultaneous connection of up to eight vacuum sensors allows flexible measuring on the spot. The DCP 3000 communicates with external components via the VACUU·BUS® digital bus system. It is characterised by fully automatic configuration, unified plug connections and cable lengths of up to 30 m. In addition the DCP 3000 offers relative pressure measurements (VSK 3000 as reference) and a data logger feature for up to 32000 data values.

Supplier: Thermo Fisher Scientific

This low-bleed, stable column produces consistent results.

Supplier: Merck

Purospher® RP-18 is designed for the separation of problematic basic compounds with simple neutral eluents. In addition Purospher® RP-18 allows the separation of hydrophilic compounds with aqueous mobile phase. Purospher® RP-18 is based upon a high purity, metal-free silica. The multi-step chemical modification and deactivation of the surface, and the polar endcapping, enables a peak-tailing-free elution of basic and chelating compounds. Purospher® RP-18 is not suitable for the separation of acidic compounds. The good chemical stability of Purospher® RP-18 enables the use of mobile phase conditions at pH 8 for a long period of time.

Supplier: Thermo Fisher Scientific

These non polar, metal columns allow you to work at temperatures up to 430 °C with no compromise in performance when analysing highly active and aggressive compounds.

Supplier: Avantor

Precision-machined stainless steel nuts and ferrules.

Supplier: VWR Collection

Maintenance parts kit for ChromasterUltra Rs systems DAD. Kit contains 4× UHP pump seal (F) 889-0411, 4× plunger wash seal 889-0415, 2× inline filter 889-0417, 1× syringe valve seal 893-0814, 1× injection port seal 889-0535, 1× syringe, 70 µl 893-0817, 1× ferrule, carbon PEEK 889-0618

Supplier: Thermo Fisher Scientific

These liners provide enhanced inertness, leading to increased accuracy, sensitivity, and precision in your gas chromatography (GC) analysis.

Supplier: ENTEGRIS

1. Slide the ferrule nut onto the tube past the groove.

Supplier: Trajan Scientific and Medical

Replacement mini union ferrule, 100% graphite, for 0,45 - 0,53 mm ID columns, 15% graphite/85% Vespel®

Supplier: Avantor

Avantor® Hichrom, Flangeless ferrule ¹/₈", Yellow

Supplier: Honeywell Chemicals

High purity solvents for speciation analysis by LC-ICP-MS. Rigorous purification procedures followed by UV spectroscopy, IC, and ICP-MS testing to assure high chemical purity and high UV transmittance. The blank values for metal traces in these solvents are in the ppb range or lower.

Supplier: Avantor

Avantor® Hichrom, End fitting with ferrule, FEM, 1/4 - 1/16"

Supplier: Trajan Scientific and Medical

Stainless steel 10-32 thread fittings use a non-swaging PEEK replaceable ferrule, for use with GLT™ columns.

Supplier: TCI

Pipe connector, in solid state at 20 °C.

Supplier: ENTEGRIS

Two- or three way, ¹/₈" orifice.

Supplier: Thermo Fisher Scientific

Gaskets, platinum cured silicone, of ferrule size 19 mm, Nalgene®

Supplier: Avantor Fluid Handling

Can handle pressures up to 225 psi.