324 Results for: "EUPROMOCHEM00003"

Supplier: Merck

Sodium hydroxide 1 mol/l (1 N) in aqueous solution, Titripur® Reag. USP, Reag. Ph. Eur. volumetric solution, Supelco®

Supplier: Merck

With their high degree of UV transmittance, low particle count, low acidity and alkalinity and low evaporation residue level, LiChrosolv® solvents are ideal for reproducible separations. Since separations are normally carried out under gradient conditions in analytical HPLC, we offer solvents in 'gradient grade' as well as 'isocratic grade'. This minimises the gradient effect of the solvent involved.

Supplier: Merck

Materials for the precise calibration and monitoring of pH meters.

Supplier: Merck

Benzoic acid, Certipur® Reag. USP, Reag. Ph. Eur. volumetric standard, secondary reference material for alkalimetry, traceable to NIST Standard Reference Material (SRM), Supelco®

Supplier: Merck

Sodium hydroxide 0.5 mol/l (0.5 N) in aqueous solution 0.5 mol/l (0.5 N) in aqueous solution, Titripur® volumetric solution, Supelco®

Supplier: Merck

These conductivity sachets are convenient, easy to use and ensure accurate and reliable results both in the field or in the laboratory. The 30 ml sachets always provide a fresh solution preventing contamination by microorganisms, CO₂ or other substances. A conductivity sensor can be simply inserted into the sachet.

Supplier: Merck

Aquastar® standards for Karl Fischer titration can be used for monitoring and qualification of your Karl Fischer instruments, for checking and evaluating measuring results, and for performing titer determination of volumetric Karl Fischer reagents.

Supplier: VWR Chemicals

Multi-Element Standard, Ion chromatography cation multi-element standard solution VI, 10 - 100 mg/L
NH₄⁺, K⁺, Na⁺, Ca²⁺, Mg²⁺, VWR® ARISTAR®, Application: Ion chromatography standards

Supplier: VWR Chemicals

Bromophenol blue sodium salt ACS

Supplier: VWR Chemicals

23 Elements 5% nitric acid solution with trace of HF.

Supplier: Merck

Sodium thiosulphate 0,1 mol/l (0,1 N) in aqueous solution, Titripur® Reag. Ph. Eur., Reag. USP volumetric solution, Supelco®

Supplier: Merck

Silver nitrate 0,1 mol/l (0,1 N) in aqueous solution, Titripur® Reag. USP, Reag. Ph. Eur. volumetric solution, Supelco®

Supplier: Merck

For full details of specification and hazards please see www.vwr.com or the VWR Chemicals catalogues

Supplier: VWR Chemicals

28 elements 1 mg/L: Al, Ag, As, B, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Sb, Se, Sr, Ti, Tl, V, Zn.

Supplier: Merck

The PhotoCheck test set is designed for testing the wavelength accuracy of all Merck photometers and spectrophotometers. It can be used as a secondary standard for testing instruments according to DIN/ISO 9000 and ISO 14000. The stable colour solutions can be used to test the following spectrophotometer filters and wavelength settings: 445 and 446 nm, 520 and 525 and 690 nm. The accuracy of the wavelength setting and the linearity of the extinction measurement is checked with four solutions per wavelength. The traceability of these test solutions to international standards is guaranteed by examining them in a reference photometer that is checked against the primary standard (NIST standard). These values are properly documented and supplied as part of the set.

Supplier: VWR Chemicals

The tightening of regulatory requirements and the increasing demands of QA/QC methodology is becoming more important across all market sectors. The demand for standards to support testing methods continues to increase, and this growth applies to water determination according to Karl Fischer. Avantor now offers a complete range of Karl Fischer water standards as CRMs to calibrate and monitor equipment and check test results.

Supplier: Merck

All Spectroquant® test kits can be used with the Prove range of spectrophotometers and Nova 60/60A instruments. Tests can be used not only on photometers and spectrophotometer from Merck, but also on photometers and spectrophotometers from other suppliers (programming details available on request).

Supplier: Merck

Tris(hydroxymethyl)aminomethane volumetric standard, secondary reference material for acidimetry, traceable to NIST Standard Reference Material (SRM)

Supplier: VWR Chemicals

Multi-Element Standard, Multi-element quality control standard 10 mg/L {Al; Ag; As; B; Ba; Ca; Cd; Ce; Co; Cr; Cu; Dy; Er; Eu; Fe; Gd; Ho; K; La; Li; Lu; Mg; Mn; Na; Nd; Ni; P; Pb; Rb; Se; Sm; Sr; Tl; Tm; V; Zn} in nitric acid 2% ARISTAR® for ICP-MS, VWR® ARISTAR®, Application: ICP-MS standards

Supplier: VWR Chemicals

These reagents are ideal for water determination including the analysis of aldehydes and ketones.

Supplier: VWR Chemicals

28 elements 100 mg/L: Al, Ag, As, B, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Sb, Se, Sr, Ti, Tl, V, Zn.

Supplier: Merck

All Spectroquant® test kits can be used with the Prove range of spectrophotometers and Nova 60/60A instruments. Tests can be used not only on photometers and spectrophotometer from Merck, but also on photometers and spectrophotometers from other suppliers (programming details available on request). Spectroquant® cell test kits.

Supplier: Merck

All Spectroquant® test kits can be used with the Prove range of spectrophotometers and Nova 60/60A instruments. Tests can be used not only on photometers and spectrophotometer from Merck, but also on photometers and spectrophotometers from other suppliers (programming details available on request). Spectroquant® cell test kits.

Supplier: Merck

The Aquastar® range is designed to provide reagents for the determination of water by Karl Fischer titration of a wide range of substrates and by a variety of methodologies. These include reagents for one- or two-component systems; combined coulometric reagents; solvents for oils and fats; reagents and solvents for determination of water in ketones and aldehydes. Calibration standards are also available.