3512 Results for: "Binder"

Supplier: Binder

Temperature test chambers with stainless steel interiors which are ideal for material testing and ageing tests. Units feature a high air exchange rate due to the heavy-duty fan, an adjustable TWB Class 2 safety device with visual alarm and 50 mm Ø exhaust duct. Fast recovery times after opening the door or air change. Units have digital temperature setting. GLP/GMP compliance is assisted by the integral RS422 interface and optional APT-COM™ DataControlSystem software.

Supplier: Binder

Base on castors, For: C 170/ CB 210

Supplier: Binder

The MKF series of dynamic climate chambers has been specially developed as precision heating and cooling chambers for industrial material testing and environment simulation applications. The units are ideal for rapid temperature changes with humidity control and have a higher capacity which exceeds the capability of normal testing chambers. The stainless steel inner chamber has door heating, a heated viewing window with LED interior lighting and programmable condensation protection for the test materials.

Supplier: Binder

Vacuum module (VD 23) with vacuum pump VAP 2 - 230 V/50 - 60 Hz option model, Chemical membrane pump with nominal pumping speed of 4,0 m³/h, final pressure 1,8 mbar, ATEX conformity: II 3G IIC T3 X (only for interior, areas coming in contact with media)

Supplier: Binder

The KBF-S ECO climatic chambers are very energy-efficient thanks to thermoelectric cooling technology with heat dissipation. The thermoelectric cooling technology means the KBF-S ECO series is also very quiet during operation.

Supplier: Binder

Climatic chamber

Supplier: Binder

Replacement daylight tubes (Arabidopsis lamps) for KBW 400 or KBWF 400

Supplier: Binder

Rack, stainless steel, For: BF/FD/FED 260

Supplier: Binder

Shelf, perforated, stainless steel, For: KT 115 series

Supplier: Binder

Factory Fitted Options for Binder FP Heating Chambers

Supplier: Binder

A powerful all-rounder among constant climate chambers: Equipped with all kinds of sophisticated technology, the KBF PRO with proven APT.line™ preheating chamber technology takes any material test in its stride – whether it takes place at -20 °C or under THB conditions at +85 °C and 85% relative humidity. Units have a stainless-steel inner chamber and temperature range of -20 to +100 °C and humidity range of 10% to 98% RH. The models offer flexible water supply options for all installation sites and consumes up to 40% less energy than its predecessor, the KMF model. Optional light modules are also available to turn the KBF PRO into a chamber for ICH photostability testing or plant growth.

Supplier: Binder

Shelves, Stainless steel shelf, For: BF/FD/FED 115

Supplier: Binder

With forced convection, the Avantgarde.Line heating and drying chambers offer quality and process reliability. The wide temperature range of up to 300 °C, mean these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ pre-heating chamber technology gives homogeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: Binder

Access port with silicone plug, left, 50 mm, For: ED 56/115/260/720

Supplier: Binder

Dry-air purge, uncontrolled, For: MKT 115

Supplier: Binder

CO₂ Incubator

Supplier: Binder

Temperature test chamber

Supplier: Binder

KMF constant climate chambers ensure constant test conditions throughout the stainless steel chamber even with a full load and only require a small amount of bench space. Units can be operated with Binder Pure Aqua Service, a flexible water purification system (optional) or deionised water. Units self-test for comprehensive status analysis.

Supplier: Binder

The KB series with compressor cooling consumes up to 30% less energy compared to its predecessor. Refrigerated incubators are mainly used for culturing tasks that need to be carried out at temperatures below room temperature or if high ambient temperatures cannot be avoided. The cooling system and the controllable fan guarantee high degrees of humidity even during cooling mode, or prolonged testing, to protect samples from drying out even when fully loaded.

Supplier: Binder

Calibration digital pressure display, including certificate. Measurement at specified pressure, range 20 - 900 mbar, For: VD and VDL

Supplier: Binder

Vacuum drying ovens with stainless steel inner chambers. All units have a microprocessor controller with two programs, 10 sections each or, alternatively, one program with 20 sections. The time interval of a single program section can be adjusted up to a maximum of 99,59 or 999,59 hours on all program sections. Units have an adjustable TWB Class 2 safety device with visual alarm. GLP/GMP compliance is assisted by the integral RS422 interface and optional APT-COM™ DataControlSystem software.

Supplier: Binder

Environmental test chamber

Supplier: Binder

Replacement cartridge for Binder Pure Aqua Service, KBF, KBF P, KBF LQC, KMF, KBWF

Supplier: Binder

Cooled Incubator

Supplier: Binder

Filter cartridge, Type: Replacement cartridge

Supplier: Binder

The KBF series is ideal for reliable stability tests and precise maintenance of constant climatic conditions. Constant temperature and humidity values are the outstanding features of this range. These constant climate chambers with stainless steel interior have a large reserve capacity and a variety of optional features. They also comply with all applicable guidelines with respect to programs and documentation requirements, such as ICH, FDA, GMP and GLP. Units can be operated with Binder Pure Aqua Service, a flexible water purification system (optional) or deionised water.

Supplier: Binder

The KBF P constant climatic chambers with ICH-compliant UV/Vis light source and KBF LQC with light dose control have a unique light concept that guarantees homogeneous light distribution. The illumination cassettes can be positioned variably and even removed. The units have a stainless steel inner chamber, an automated water and waste water management system, and an access port with silicone plug Ø 30 mm on the left hand side. Units self-test for comprehensive status analysis.

Supplier: Binder

These high precision temperature test chambers with stainless steel interiors are ideal for precise and accurate conditioning of materials and samples, ageing tests, curing of plastics and determination of humidity content. Units feature a controller with two programs with 10 sections each, or alternatively one program with 20 sections. The time interval of a single program section can be adjusted up to a maximum of 99,59 or 999,59 hours on all program sections and there is also an adjustable TWB Class 2 safety device with visual alarm. Adjustable ventilation by means of ventilation slide and flap together with 50 mm Ø exhaust duct. Fast recovery times after opening the door or air change. GLP/GMP compliance is assisted by the integral RS422 interface and optional APT-COM™ DataControlSystem software.

Supplier: Binder

Heating output reinforced, 120/230 V, For: FD 115

Supplier: Binder

Access port with silicone plug, 100 mm top, For: KB 53/115