3512 Results for: "Binder"

Supplier: Binder

Rack, stainless steel, For: BD/ED 115

Supplier: Binder

Deep temperature gloves, medium size

Supplier: Binder

Microscopy and staining reagents, Embedding and mounting media

Supplier: Binder

CO₂ Incubator

Supplier: Binder

CO₂ Incubator

Supplier: Binder

CO₂ Incubator

Supplier: Binder

The M Series Avantgarde.Line units have a maximum of 300 °C and various advanced programming options ensure these material test chambers are ideal for material and aging tests. The units have a high air flow and their powerful fans ensure rapid heating.

Supplier: Binder

The WIC series walk-in-chambers offer a wide range of features and benefits to perfectly meet requirements in stability testing. Perfect test conditions are maintained over a wide range of temperatures from 10 to 50 °C and relative humidity of 20 to 90% RH.

Supplier: Binder

The instrument tray is used for storing instruments during sterilisation processes.

Supplier: Binder

Replacement filter (Class F6/EU6)

Supplier: Binder

This system is used to fully desalinate faucet water for BINDER climate chamber humidification systems. The ion exchanger system consists of a pressure container, a single-use filter cartridge and a pressure container lid.

Supplier: Binder

Standard Incubator

Supplier: Binder

The KBW series plant growth chambers are precise units for plant cultivation under advanced working conditions. They provide perfect simulation of a wide range of growing environments. The units satisfy all requirements for optimum lighting and temperature conditions, so that culture processes can be defined and reproduced exactly. The design includes two or three variable position daylight cassettes with five daylight luminescence tubes each, which provides homogeneous light distribution. Units self-test for comprehensive status analysis.

Supplier: Binder

Trolley, Base with casters for CB56 series

Supplier: Binder

Standard Incubator

Supplier: Binder

Analog output 4 - 20 mA - for temperature and pressure values (output not adjustable), For: Vacuum drying chambers, VD and VDL series

Supplier: Binder

The MFK series of dynamic climate chambers has been specially developed as precision heating and cooling chambers for complex standards-based climatic testing. The units are ideal for rapid temperature changes with humidity control with a low temperature range down to –70 °C and have a higher capacity which exceeds the capability of normal testing chambers. The stainless steel inner chamber has door heating, a heated viewing window with LED interior lighting and programmable condensation protection for the test materials.

Supplier: Binder

Shelf perforated KB(W) 400

Supplier: Binder

The Binder FP series of material test chambers with mechanical convection and program functions provide reliably short drying times and particularly fast heating – even for chambers under full loads.

Supplier: Binder

Installation and comissioning, For: For all WIC sizes

Supplier: Binder

Perforated stainless steel shelf, For: CB 56

Supplier: Binder

Multi-functional drying ovens with stainless steel chambers which are ideal for use in the pharmaceutical and chemical industries, biotechnology, medicine and universities. Ovens feature one temperature program ramp, an adjustable temperature safety device, Class 2 (DIN 12880) with visual alarm and adjustable ventilation by means of front ventilation slide and rear 50 mm Ø exhaust duct. Fast recovery times after opening the door or air change. GLP/GMP compliance is assisted by the RS422 interface and by optional APT-COM™ DataControlSystem software.

Supplier: Binder

Thanks to thermoelectric cooling technology with heat dissipation, KB ECO cooled incubators are one of the most energy efficient cooling incubators on the market. The thermoelectric cooling technology means the KB ECO series is also very quiet during operation.

Supplier: Binder

deconex® SOLARSEPT is used for disinfection when a short exposure and drying time is required.

Supplier: Binder

The VD series of vacuum drying chambers provide fast gentle drying of non flammable solvents, delivering impressive performance through their precise temperature control and gentle drying. Expansion rack technology also ensures optimal heat transfer, shelves provide flexible placement, and the interior of the chamber is easy to clean. The VDL series of safety vacuum drying chambers ensures maximum safety when drying flammable organic solvents, and have been safety tested by a state recognised test institute (GS mark). VD/VDL units can also be purchased as modular options with vacuum pump and pump chamber to form a complete system.

Supplier: Binder

Stainless steel chamber rack, for 6×4 standard boxes (50 mm), dimensions: W×D×H: 139×558×331 mm, For: UF V

Supplier: Binder

These energy efficient cooled incubators have been designed for use in the temperature range from 4 to 100 °C. They feature a Peltier cooling system for finely controlled cooling down to 4 °C together with powerful conventional heating. The unit has easy to clean stainless steel interior and inner safety glass door. The incubators are ideal for use in microbiology, genetics, zoology, food and beverage industries, medicine, forensics, pharmaceutical and cosmetic industries. USB port for reading data and ethernet interface for communication software APT-COM™ DataControlSystem.

Supplier: Binder

Avantgarde. Line incubators ensure stable and reliable incubation of microbiological cultures and guarantee reproducible results for routine tests in the laboratory – even high batch throughputs and with long-term operation. Avantgarde. Line BD models have natural convection ensuring rapid temperature equalisation after the door is opened. The BF models have forced convection via a fan. The APT.line™ pre-heating chamber technology gives homogeneous temperature distribution, excellent temperature uniformity and low fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: Binder

With natural convection, Avantgarde.Line heating and drying chambers offer quality and process reliability. With a wide temperature range up to 300 °C, these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. APT.line™ pre-heating chamber technology gives homegeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. These units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: Binder

Temperature test chamber