8139 Results for: "Advanced Inlet Septa"

Supplier: VWR Collection

These spare parts are suitable for certain HPLC pumps.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: VWR Collection

VWR®, Chromatography vial closure, Steel, Screw caps with septa, open top, magnetic, Hardness: 70° shore A, Septum: Viton 1A black, Thickness: 1,0 mm

Supplier: Lenz Laborglas GmbH & CO.KG

DURAN®, borosilicate glass 3.3, clear.

Supplier: Avantor Fluid Handling

No need to buy two fitting halves.

Supplier: VWR Collection

VWR®, Chromatography vial closure, PP, Screw caps without septa, closed top, 8-425 thread, Hardness: －, Septum: －, Thickness: －

Supplier: Avantor

This reusable UHPLC column connector have 10-32 threads. This fitting is reusable, as they are not permanently swaged onto the inlet tubing.

Supplier: Merck

The syringe adapter permits the withdrawal of calibration gas through a silicone rubber septum seal using a gas syringe.

Supplier: VWR Collection

Crimp Neck ND13 vials manufactured from 1st hydrolytic class borosilicate glass with flat bottom. They can be purchased with a variety of aluminium seal styles and septa materials.

Supplier: BW TECHNOLOGIES

Accessory for gas detection, IntelliDoX Single-inlet key

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: VWR Collection

Chromatography vial closure, Screw caps with septa, open top, Hardness: 50° shore A, Septum: Red butyl/grey PTFE, Thickness: 1,6 mm

Supplier: Merck

Filter holder, Valve seals, PTFE, 6,35 mm, female NPT inlet/outlet connection for pressure gauge and vent/relief valve attachment and elbow fitting(s) for inlet and outlet (labeled), For: Inline filter holders

Supplier: Thermo Fisher Scientific

Continuous flow distributor adapter for inlet-outlet assembly, For: Ultracentrifuge rotors

Supplier: Avantor Fluid Handling

Dispense liquids safely and quickly from most storage containers.

Supplier: VWR Collection

VWR®, Chromatography vial closure, PP, Ø: 18 mm, Type: PP black, closed, without septum, Hardness: -, Septum: -, Thickness: - mm

Supplier: VWR Collection

Chromatography vial closure, Screw caps with septa, closed top, Hardness: 50° shore A, Septum: Cream silicone/red PTFE, Thickness: 1,5 mm

Supplier: Avantor

The Last Drop™ eluent filter utilises a flat element, which sits parallel to the bottom of the reservoir, allowing the filter to draw all but the last 2% of the eluent without drawing air into the system. The filter consists of a 316 stainless steel or PTFE filter element in an inert housing.

Supplier: VWR Collection

VWR®, Septa, Beige silicone/natural PTFE, Hardness: 50° shore A, Thickness: 3,2 mm, Ø: 23 mm

Supplier: ENTEGRIS

Two- or three-way diaphragm valves, ¹/₄" orifice, normally closed.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: HELLMA

Hellma® high precision quartz glass flow through cell for absorption measurements in the UV/Vis range, 10 mm path length, with inlet and outlet nozzle.

Supplier: SP Industries

Natural rubber septa suitable for 5 mm OD thin wall Precision NMR tubes.

Supplier: Trajan Scientific and Medical

The o-ring prevents gas leaks and maintains a uniform flow path through the inlet, where even small leaks can cause sample loss - affecting accuracy and reproducibility of results.