8139 Results for: "Advanced Inlet Septa"
GC septa, Thermogreen® LB-1
Supplier: Merck
These septa are suitable for use with 50 to 300 °C inlet temperatures.
Expand 3 Items
GC septa, Thermogreen® LB-2
Supplier: Merck
Ready to use GC septa for inlet temperature of up to 100 to 350 °C.
Expand 8 Items
CRS Puresep T GC Septa
Supplier: Trajan Scientific and Medical
Reliabily against the carrier gas pressure in the inlet. Capable of being pierced and resealing time after time without pieces of the septa being deposited in the GC inlet system. Does not contaminate or bleed material into the chromatographic system.
Expand 5 Items
Advanced Green 3 Low-Bleed GC Septas
Supplier: Trajan Scientific and Medical
Advanced Green 3 low-bleed GC septa is a premium septa for autosamplers in all critical analyses.
Expand 15 Items
SGE OptChem™ Single Taper Inlet Liners
Supplier: Trajan Scientific and Medical
SGE OptChem™ GC inlet liner provide optimal performance with advanced coating technologies in an easy to use format for GC and GCMS.
Expand 4 Items
Merlin Microseal
Supplier: VARIAN
The Merlin Microseal is available in standard and high pressure kits.
Expand 1 Items
O-Ring seals for GC columns, Therm-O-Ring™, Supelco®
Supplier: Merck
Inlet liners used in an GC require an O-ring placed near the top for proper operation. This O-ring ensures that the only path for carrier gas to get to the outside of the inlet liner is through the grooves in the inlet seal at the bottom of the injection port.
Expand 2 Items
Inlet liners, SPME-GC, Supelco®
Supplier: Merck
SPME-GC inlet liners are designed for optimum sample introduction for specific injection techniques that are suitable for Agilent, Perkinelmer, Shimadzu, Finnigan, Varian and Thermo scientific equipped with split/splitless inlets.
Expand 7 Items
Inlet liners, FocusLiner™, Supelco®
Supplier: Merck
FocusLiner™ inlet liners are designed with wool plug to promote the rapid vaporisation of the entire sample, minimise mass discrimination, and prevent non-volatile material from entering the column. It incorporates a unique design to prevent the shifting of the wool plug during repeated injections or sudden inlet pressure changes. These liners are suitable for Agilent, Perkinelmer, Shimadzu, Finnigan, Varian and Thermo scientific equipped with split/splitless inlets.
Expand 8 Items
Spare Parts for VWR® Hitachi HPLC Instruments
Supplier: VWR Collection
Inlet tube
Expand 1 Items
SGE OptChem™ Double Taper Inlet Liners
Supplier: Trajan Scientific and Medical
The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner.
Expand 3 Items
Avantor® Hichrom, Inlet Solvent Filters
Supplier: Avantor
These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.
Expand 2 Items
Avantor® ACE®, HPLC Column Connectors, Finger-Tight
Supplier: Avantor
PEEK HPLC column inlet / outlet connectors. These column connectors are designed for use at both the column inlet and outlet ends. They are suitable for use with ¹/₁₆" ext.Ø tubing and all manufacturers' HPLC systems and all brands of HPLC columns.
Expand 2 Items
VWR®, Accessories for Bottle-Top Dispensers Zippette™
Supplier: VWR Collection
Inlet tubes, Zippette™, 5/10/30 ml
Expand 1 Items
DANI liners
Supplier: Trajan Scientific and Medical
Deactivated liners for DANI GCs.
Expand 4 Items
Accessories for AirPort MD8
Supplier: Sartorius
Aluminum connector for air sampler inlet to flexible hose, For: AirPort MD8
Expand 1 Items
VWR®, Septa GL 45
Supplier: VWR Collection
VWR®, Septa, Beige silicone/white PTFE, Hardness: 50° shore A, Thickness: 3,2 mm, Ø: 43 mm
Expand 3 Items
VWR®, Septa 24 mm
Supplier: VWR Collection
VWR®, Septa, Transparent blue silicone /white PTFE, Hardness: 45° shore A, Thickness: 1,3 mm
Expand 1 Items
John Guest acetal push-to-connect 3-way divider
Supplier: Avantor Fluid Handling
No need to buy two fitting halves.
Expand 1 Items
ATAS optic liners
Supplier: Trajan Scientific and Medical
Deactivated liners for ATAS optic injectors.
Expand 4 Items
Galtek® check valves
Supplier: ENTEGRIS
O-ring free design, ¹/₂ or ¹/₄" orifice.
Expand 6 Items
Avantor® ACE®, UHPLC Column Connectors
Supplier: Avantor
Stainless steel/PEEK UHPLC column inlet / outlet connectors. These column connectors are designed to connect UHPLC columns to UHPLC systems and make other similar connections. They are suitable for use with ¹/₁₆" ext.Ø tubing and virtually all manufacturers' UHPLC systems and all brands of UHPLC columns.
Expand 4 Items
VWR®, Screw Caps for Screw Neck Vials ND24
Supplier: VWR Collection
VWR®, Chromatography vial closure, PP, Screw caps without septa, closed top, Hardness: －, Septum: －, Thickness: －
Expand 13 Items
VWR®, Septa GL 32
Supplier: VWR Collection
VWR®, Septa, Cream silicone/beige PTFE, Hardness: 50° shore A, Thickness: 3,2 mm, Ø: 30 mm
Expand 1 Items
SGE OptChem™ Tapered FocusLiner Inlet Liners
Supplier: Trajan Scientific and Medical
The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.
Expand 4 Items
VWR®, Septa ND17
Supplier: VWR Collection
Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.
Expand 2 Items
VWR®, Septa ND12
Supplier: VWR Collection
Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.
Expand 1 Items
VWR®, Septa 12 mm
Supplier: VWR Collection
Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.