Supplier: Hach

Used for determination of Total Organic Carbon (TOC) either by low range, mid range or high range test 'N Tube' method respectively. The set includes digestion vials and reagents for 25 to 50 tests.

Supplier: MACHEREY-NAGEL

Suitable for automatic water analysis on the Skalar robot SP2000 series. Precise rapid tests for all types of water and wastewater samples.

Supplier: MACHEREY-NAGEL

A pre-dosed NANOCOLOR® tube test for photometric determination of TOC (total organic carbon) in water.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of Kjeldahl nitrogen in water samples.

Supplier: MACHEREY-NAGEL

Reagents for the determination of cyanuric acid in water samples.

Supplier: Hach

It is a simple, economical colour disc kit to determine the presence of detergents in surface or ground waters which indicates industrial or domestic pollution. In natural waters anionic LAS and ABS detergents cause excessive foaming, promote growth of disease producing organisms and tend to kill aquatic life. This kit achieves fast results with an portable test kit.

Supplier: Lovibond

Easily monitor nitrite levels in closed-loop cooling systems with this liquid reagent. Proper control of nitrite levels prevents pipework corrosion. This easy-to-use colourimetric method test can monitor high levels (up to 2,500 mg/L) of nitrite without the need to dilute samples.

Supplier: MACHEREY-NAGEL

Semi-quantitative test strips for reliable determination of total chlorine concentrations as low as 0,01 mg/L (ppm). A hole in the plastic carrier allows the water to migrate through the test pad, providing a high level of sensitivity. Ideal for rapid and easy analysis of total chlorine directly on-site. No maintenance or calibration is required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: Hach

This kit is used for controlling boiler and cooling water treatment and checking corrosion using the drop count test which is a simple volumetric/ titration method with colour indication. It is an economical solution for the small boiler operator who needs to monitor alkalinity (5 to 400 mg/L), chloride (5 to 400 mg/L), hardness (0 to 2500 mg/L), iron (0 to 4 mg/L), and pH (4 to 10).

Supplier: Hach

Test kit, Hardness 1 buffer solution

Supplier: Hach

Test kit, Manganese, Range: 0,1 - 20,00 mg/l

Supplier: Lovibond

Test kit, Sodium hypochlorite test kit, Range: 2 - 18% NaOCl

Supplier: Hach

Test kit, Hardness 2 indicator solution, 100 mL MDB

Supplier: Lovibond

Test kit, Calcium hardness tablets, tablet count

Supplier: Lovibond

Test kit, VARIO ammonia salicylate F5 (powder pack)

Supplier: Hach

Digital titration provides a more precise and accurate method than the drop test method.

Supplier: Hach

For determination of trace levels of iron by the Ferrozine method.

Supplier: Lovibond

Test kit, Iron Vario Ferro F25 Powder Reagents, Range: 0.02 - 3 mg/l

Supplier: Lovibond

Test kit, Chlorine VARIO (free), Range: 0 - 5 mg/L, For unit: MD 600

Supplier: Lovibond

Test kit, Nickel-51, Nickel-52 reagent test, Range: 0.02 - 1 mg/l, 0.2 - 7 mg/l Ni

Supplier: Hach

The kits are used to determine the total hardness level.

Supplier: Hach

Glycine reagent for Hach chlorine dioxide determination by DPD/glycine methods.

Supplier: Lovibond

Test kit, Sulphide No1 tablet, Range: 0 – 0,5 mg/l S, For unit: MD600, MD610, MultiDirect and Spectrodirect

Supplier: Hach

Designed to analyse tannin and lignin together and report result as mg/l tannic acid.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of chromate in water samples.

Supplier: Lovibond

Test kit, Hydrazine test powder, Range: 0,05 – 0,5 mg/l N₂H₄, For unit: MD100 boiler water, MD610

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of cyanide in water samples.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of chloride in water samples.