You searched for: Cleanroom Wipes

Supplier: CONTEC

The Polywipe-C Heatseal wipe is made from filament polyester and pre-saturated with 70% IPA and 30% DI water.

Supplier: CONTEC

Amplitude™ Prozorb® wipes are a hydroentangled blend of cellulose and polyester, produced through a special process that creates apertures in the fabric while enhancing the thickness and providing excellent cleanliness.

Supplier: CONTEC

The Amplitude™ Sigma™ Plus wipes are strong and durable, compatible with most solvents, and have outstanding sorbency.

Supplier: CONTEC

These absorbent non abrasive wipes consist of long staple cellulosic fibres which are wet laid in a paper making process to form an extremely clean sheet.

Supplier: CONTEC

Non woven wipes pre-saturated with acetone or isopropanol.

Supplier: CONTEC

This microfiber wipe is made of 100% polyester microfibre yarn knitted into a thermally bonded PP substrate.

Supplier: CONTEC

The StatZorb wipe is made from polyester fabric combined with a conductive fibre knitted in a specially designed grid pattern that minimises 'hot spots'.

Supplier: CONTEC

Pre-saturated knitted polyester wipes made with Polynit Heatseal material. The wipes are pre-saturated with 70% IPA and 30% DI Water. They are therefore ideal for cleanroom applications, surface preparation and critical manufacturing processes.

Supplier: CONTEC

These microfibre wipes (80% polyester/20% nylon) are made with fabric densely knitted by continuous microdenier filament. The wipes are laser cut, which seals the fibers at the edges. The unique structure of microfibre improves the surface contact, and provides more effective cleaning.

Supplier: CONTEC

Recycled 100% knitted polyester cleanroom wipes offer a sustainable solution for cleanroom environments, without jeopardising quality or performance. Soft textured wipes clean surfaces without scratching, while offering low levels of particles and fibres, abrasion and chemical resistance, and good solvent compatibility.

Supplier: CONTEC

Ideal for wiping exterior surfaces of products and cleaning interior surfaces of process tools or other equipment. Made from 100% textured polyester no-run knit.

Supplier: CONTEC

Amplitude™ Lambda™ wipes are made from hydroentangled blend of 58% cellulose and 42% polyester. This hydroentangled fabric provides low levels of particles and extractables.

Supplier: CONTEC

The lightweight Polywipe-C Heatseal wipe consists of a fabric knitted from filament polyester and features a textured surface for effective cleaning. The wipe is laser-cut, which seals the fibers at the edges.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with sealed edges and increased sorbency.

Supplier: CONTEC

SATWIPES® Sigma™ consists of a perforated roll of saturated wipes which are dispensed through a center-pull canister. The wipes are made of 55% cellulose and 45% polyester presaturated with IPA and DI water.

Supplier: CONTEC

100% nonwoven polyester wipes presaturated with 70% IPA and 30% DI water.

Supplier: CONTEC

Cellulose/polyester nonwoven wipes presaturated with 70% IPA and 30% DI water.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with sealed edges.

Supplier: CONTEC

100% interlock knit lightweight polyester wipes with sealed edges.

Supplier: CONTEC

These low endotoxin wipes are made from 100% knitted polyester and pre-saturated with a blend of 70% USP-Grade IPA and 30% water for injection (WFI).

Supplier: CONTEC

Presaturated wipes can offer many benefits over bottled alcohol and dry wipes for cleanroom use. Contec’s sterile SATWIPES Theta with 70% denatured ethanol consist of a perforated roll of presaturated wipes which are dispensed through a convenient centre pull canister.

Supplier: CONTEC

100% continuous filament polyester wipe with sealed border and Particle Attraction Technology (PAT).

Supplier: CONTEC

These wipes are manufactured from high quality 100% knitted polyester fabric with sealed edges. The polyester fabric offers the widest range of solvent compatibility. Ideal for use in product contact areas.

Supplier: CONTEC

ProChlor is a sporicide achieving a 100% kill against spores in under one minute. It is validated for sporicidal transfer disinfection in practice-mimicking conditions, achieving a log 5 kill on syringe paper samples and complete kill on plastic syringe samples in one minute.

Supplier: CONTEC

These hydrophilic polyurethane foam wipes are engineered for use in cleanroom and other critical applications. They combine high absorbency with extremely low levels of extractable residue and particles.

Supplier: CONTEC

This non woven, meltblown PP wipe is pre-saturated with 91% isopropanol and 9% deionised water.

Supplier: CONTEC

The Twill Jean wipe is a 100% cotton fabric, woven in a 2×1 twill construction. It is very absorbent and has high thermal stability for high temperature applications.

Supplier: CONTEC

Dry wipes designed for durability and ease of use that are ideal for cage and equipment wipe down or downtime 'super cleaning'.

Supplier: CONTEC

Presaturated with IPA/DI water.

Supplier: CONTEC

The Polynit-Z wipe features conductive yarns within the polyester interlock knit. It is a very clean static dissipative wipe that is well suited for applications that are sensitive to electrostatic discharge. The average surface resistivity is 3,5×10¹⁰
ohms/sq.