You searched for: Samplers

Supplier: Merck

The MAS-100 NT® Ex combines all the advantages of the MAS-100 NT® but, in addition, has been tested for use in areas where there are explosive atmospheres.

Supplier: Merck

The perforated sampling head may be sterilised and can be adjusted to sample horizontally.

Supplier: Merck

Highest collection efficiency and safety in isolators and rabs with up to four sampling points.

Supplier: Merck

The MAS-100 VF® uses standard Petri dishes for monitoring the quality of your environment. Its electronic speed control maintains an accurate flow rate. The handle enables the sampler to be mounted onto an optional tripod, thereby allowing testing at different angles for fixed applications. The perforated lid is the same as on the standard MAS-100® sampler.

Supplier: Merck

The MAS-100 Iso NT® is a high-performance instrument based on the impaction principle. The head (using standard 90 mm Petri dishes) can be installed at the critical control points with all electronic and moving parts kept outside the critical zone.

Supplier: VWR Collection

The SAS Super IAQ provides the same efficiency as recorded by sampling tests conducted by Centre for Applied Microbiology & Research (CAMR-UK).

Supplier: VWR Collection

Multi-sectored samplers for sampling powders, pellets and friable materials, which may become non homogeneous in bags at various levels. The models with separate sections are mainly used for chemical or physical analysis; models with communicating sections are used for microbiological analysis.

Supplier: Merck

The MAS-100 Eco® is a robust and reliable air sampler designed for highest precision.

Supplier: BURKLE

The sample is directly extracted into the original sample bottle with screw cap.

Supplier: Avantor

Cycle-Tap sampler is a device for sampling small quantities of solvent.

Supplier: BURKLE

These disposable samplers for the highest standards do not need to be cleaned after use.

Supplier: BURKLE

These core samplers can be used to take samples of bulk materials, which can easily become stuck or settle during sampling due to their particle form.

Supplier: Avantor Fluid Handling

WFI Samplers are an easy and convenient solution for obtaining perfect fluid samples from a WFI water drop.

Supplier: BURKLE

This ViscoDispo sampler is for highly viscous media up to 100 000 cP. The ergonomically shaped handle and stable drawbar make the sample easier to draw.

Supplier: BURKLE

This MultiDispo zone samplers for taking samples from multiple layers of the sample material.

Supplier: VWR Collection

SAS Super Pinocchio II is a microbial impaction sampler to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and the flow meter regulated to achieve the required flow rate.

Supplier: VWR Collection

Piston sampler, made from chromium plated brass, sterilisable. The end of the tube is sharp for puncturing boxes, bales or bags containing soft pasty material.

Supplier: BURKLE

For sampling bulk goods at depths of up to 3,5 metres, depending on the density of the bulk goods to be sampled. Inserting the sampler into the bulk goods closes the collection chamber. At the desired depth, the collection chamber is opened by withdrawing the sampler, the chamber is filled and can be pulled out and collected.

Supplier: BURKLE

Complete handy set combining the LiquiSampler and the ViscoSampler with practical accessories.

Supplier: Avantor Fluid Handling

Simple and safe removal of liquid samples.

Supplier: BURKLE

Liquid samplers for aggressive liquids, with fixed rod.

Supplier: BURKLE

PharmaPicker is designed for sampling very small quantities of highly potent or active powders for analysis. The smallest sample quantities can be collected with the PharmaPicker.

Supplier: BURKLE

Pigment lance to sample pigments, pastes and agglomerating bulk goods.

Supplier: BURKLE

PharmaDispo disposable powder sampler is a multi-target sampler that takes three separate target point samples with a single sampling.

Supplier: BURKLE

The Vampire sampler can be used to take samples from liquids easily, even from deeper depths.

Supplier: Hach

The Sludge Judge® sampler is designed to take accurate readings of settled solids, 5% or less, in a variety of liquids to any depth at temperatures up to 74 °C.

Supplier: BURKLE

This sampler with drilling blades makes it easy to take samples of media, even those with high density, and every type of highly compacted powders and granulates.

Supplier: BURKLE

The collection lance consists of an inner tube and an outer tube. The suction position can be varied steplessly with the outer tube within a height of 0 to 48 cm.

Supplier: 3M Food Safety

3M™ Swab-sampler with Letheen broth is a convenient and quick collection device for environmental sampling and testing over small surface areas.

Supplier: NASCO FORT ATKINSON

For collecting liquids, powders, or small solids from a horizontal flowing stream