Supplier: Binder

With natural convection, Avantgarde.Line heating and drying chambers offer quality and process reliability. With a wide temperature range up to 300 °C, these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. APT.line™ pre-heating chamber technology gives homegeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. These units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: Binder

The VD series of vacuum drying chambers provide fast gentle drying of non flammable solvents, delivering impressive performance through their precise temperature control and gentle drying. Expansion rack technology also ensures optimal heat transfer, shelves provide flexible placement, and the interior of the chamber is easy to clean. The VDL series of safety vacuum drying chambers ensures maximum safety when drying flammable organic solvents, and have been safety tested by a state recognised test institute (GS mark). VD/VDL units can also be purchased as modular options with vacuum pump and pump chamber to form a complete system.

Supplier: Thermo Fisher Scientific

Heating and drying ovens with stainless steel chambers, which are designed for routine applications. Units with natural convection are ideal for gentle drying and heating, to protect delicate samples. Units with forced convection are suitable for faster drying and heating, and superior temperature uniformity.

Supplier: Thermo Fisher Scientific

Heratherm™ large capacity ovens were designed for larger samples or high sample volume. All models have a large, easy to view, vacuum fluorescence display and simple to use touch button operation which is controlled by a microprocessor and automatic over-temperature alarm system to protect samples. All units are available in convenient 230 V version - no special connection required.

Supplier: Thermo Fisher Scientific

Heating and drying ovens with coated or stainless steel exterior (SS models). The timer allows the oven to be turned on or off after a pre-set time, with a choice between weekly, hourly or real time settings. Units with natural convection are ideal for gentle drying and heating, to protect delicate samples. Units with forced convection have adjustable fan speed and are suitable for faster drying and heating, and offer superior temperature uniformity.

Supplier: Thermo Fisher Scientific

Heating and drying ovens with coated or stainless steel exterior. The timer allows the oven to be turned on or off after a preset time, with a choice between weekly, hourly or real time settings. Units with natural convection are ideal for gentle drying and heating, to protect delicate samples. Units with forced convection have adjustable fan speed and are suitable for faster drying and heating, and superior temperature uniformity.

Supplier: UVP ULTRA VIOLET PRODUCTS

The ultimate oven for multiple motion options, the Multidizer oven comes with both a rotary wheel (in the lower chamber) and a reciprocating shaker tray (in the upper chamber). It also offers a rocker tray and/or orbital motion tray as options. These are to accommodate different containers and usages. The lower chamber of the unit is the same as for the HB-1000 and operates independently of the top chamber.

Supplier: Thermo Fisher Scientific

Lindberg/Blue M Moldatherm box furnaces are versatile selection for a variety of industrial and laboratory applications.

Supplier: Thermo Scientific

Vacuum drying ovens with stainless steel chambers, vacuum fittings, tubing and ball valve. Units are designed for gentle drying of heat-sensitive samples and have adjustable temperature limit protection, protection Class 2 (DIN 12880, Part 1).

Supplier: Thermo Fisher Scientific

Thermolyne™ muffle furnaces offer heating solutions for a number of application needs, from general laboratory use to industrial applications. Units are ideal for fast heat up and temperature control up to 1200 °C. The furnaces are used for chemical analysis, materials testing, determination of volatiles in waste water treatment plants, industrial plants, pharmaceutical and cosmetic companies, environmental laboratories, agriculture laboratories and paper manufacturers.

Supplier: BOEKEL SCIENTIFIC

RapidFISH slide hybridisation oven was designed to simplify fluorescent in-situ hybridisations procedures for FFP samples, cell suspensions, and other tissue preparation procedures.

Supplier: Cole-Parmer

Use and recover volumes as low as 5 ml, ensuring preservation of precious samples.

Supplier: BOEKEL SCIENTIFIC

Hybridisation and wash methods vary according to application and personal choice. Boekel Scientific offers a range of hybridisation incubators with features that include digital display for ease and reproducibility of temperature setting; microprocessor or proportional temperature control; rapid heat-up, optimised heater power and natural or forced air convection.

Supplier: Cole Parmer

Versatile - features both rotisserie and rocking motions.

Supplier: NABERTHERM

Ovens that are designed for drying and evaporation of solvent-containing materials. Furnace based technology utilised for ovens, units have a 1.4301 (DIN) stainless steel chamber, which is rust-resistant and easy to clean, they feature horizontal forced convection.

Supplier: Thermo Scientific

The LUT ovens are designed for drying paint and other coatings where solvents in the air can form explosive atmospheres, where there is a restriction on the maximum quantity of solvent*. The LUT 6050 F is for installation in areas subject to fire hazards, e.g. where laquers are handled. The inner chamber and all fittings are made of 1,4301 stainless steel, and insulating materials are free of surface active substances (no silicone is used). The formation of vapour pockets is avoided by a well directed air supply system, fresh air is filtered and pre-heated before it enters the chamber, a radial fan ensures the heated fresh air and solvent vapours mix efficiently.

Supplier: Thermo Scientific

For incineration and annealing loss determinations, high temperature drying, materials testing and ashing processes on a laboratory scale. The heating coils are located and protected in T fixtures at the sides of the working area and the chamber inner surfaces are ceramic plates. They are easy to replace, with no renewal of the insulating material necessary. Optimum insulation and heating conditions produce a consistent temperature distribution in the oven chamber: max. fluctuation of 13 K.

Supplier: BOEKEL SCIENTIFIC

The Shake ‘N’ Bake hybridisation oven is ideal for hybridising and pre hybridising membranes used in Southern and Northern blotting techniques. The gentle rocking motion provides washes that are less messy than a shaking water bath and more convenient than a shaker inside a conventional incubator. The small footprint conserves valuable bench space.

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Stainless steel exterior and interior.

Supplier: TERMAKS

The TS9000 series consists of four different models with capacities from 26 to 430 litres. The interior housing and shelves are made of stainless steel. The exterior is constructed of electrolytically galvanised steel sheets, coated with a grey epoxy polyester paint (RAL 7035). The three smallest units are bench top models that are stackable. They can be wall mounted using brackets. The largest model is freestanding and has adjustable feet. Units have a choice of two timer systems: the default standard timer which can be set to maximum 99 hours and 59 minutes, or a real time programme which makes it possible to operate the chamber at two different temperatures daily or weekly. Ovens have an automatic safety thermostat which increases safety and is simple to operate.

Supplier: NABERTHERM

These compact tube furnaces with a SiC rod heating and integrated switchgear with controller can be used universally for many processes. They represent an inexpensive variant in the high-temperature range. The standard mounting options for accessories make them flexible for use in a wide range of applications.

Supplier: NABERTHERM

These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, make these tube furnaces suitable for integration into existing process systems.

Supplier: NABERTHERM

These compact bench top tube furnaces with integrated controllers can be widely used for a variety of processes. Equipped with a standard C 530 ceramic working tube and two fibre plugs they have an unbeatable price/performance ratio. Units feature rust-free, textured stainless steel exteriors. R models feature Tmax 1200 or 1300 °C, RD models have Tmax 1100 or 1300 °C.