Tissue Grinders

Supplier: VWR Collection

Borosilicate glass tube, PTFE pestle with stainless steel shaft. Tissue grinders are used for controlled reduction of particle size and homogenisation of a variety of substances, especially biological material. The shearing forces generated by the movement of the rotating plunger in a precision bore tube cause size reduction, determining factors include clearance between the pestle head and tube, speed of rotation and viscosity of medium.

Supplier: MP Biomedicals

Stainless Steel Tubes are ideal for grinding, lysis, and homogenisation of the most resistant samples.

Supplier: DWK Life Sciences

These borosilicate glass tissue grinders combine both conical and cylindrical surfaces to reduce tissue and also produces a uniform homogenate. Construction is strong enough to allow the pestle to be motor driven and also the grinding efficiency is greatly improved while using this tube.

Supplier: DWK Life Sciences

Borosilicate glass with ground glass pestle.

Supplier: KARTELL

Homogeniser, Tissue, Potter, Borosilicate glass, 15 ml, Int.Ø×H: 16×155 mm

Supplier: Spectrum Laboratories

The stainless steel Bessman tissue pulveriser consists of a two-component mortar with handles and a pestle, specifically designed for pulverising 10 - 1000 mg of tissue.

Supplier: DWK Life Sciences

CS1 tissue grinders are suitable for standard grinding, tissues are ground within a sealed container to minimise the risk of personal contact.

Supplier: DWK Life Sciences

Pellet pestles with a stainless steel shaft/CTFE tips.

Supplier: DWK Life Sciences

Potter-Elvehjem with all-glass construction designed for a motor drive using a stirrer adapter.

Supplier: DWK Life Sciences

The kit contains a variety of the finest microscale tissue grinders suitable for use on tough connective tissue and soft tissue such as brain or liver.

Supplier: DWK Life Sciences

Designed primarily for cellular work where the nucleus remains intact after homogenisation.

Supplier: DWK Life Sciences

These tissue grinders (borosilicate glass, PTFE pestle with glass tube) combine both conical and cylindrical surfaces to reduce tissue and also produces a uniform homogenate. Construction is strong enough to allow the pestle to be motor driven and also the grinding efficiency is greatly improved while using this tube.

Supplier: DWK Life Sciences

Glass tube with a PTFE pestle. Tissue grinders with capacity of 5 to 45 ml have radial serrations on the lower portion of the pestle to deliver the homogenate into the cylindrical portion of the tube.

Supplier: DWK Life Sciences

Borosilicate glass. Designed to retain a high percentage of cell nuclei and mitochondria in soft tissues. In operation, the pestle ball is encircled in liquid which avoids heat build up. Friction is reduced and there is reduced heat accumulation.

Supplier: DWK Life Sciences

Mortar in borosilicate glass, PTFE pestle with stainless steel rod. Handheld homogeniser with conical surface, which allows initial size reduction, followed by passage through the cylindrical section for the final homogenisation step. Grinding efficiency is improved and less time is required as compared to the Tenbroeck and Potter-Elvehjem designs. Recommeded for soft tissues such as brain.

Supplier: witeg Labortechnik

Tissue grinders are made of borosilicate glass, with PTFE pestle and stainless steel shaft.