You searched for: Closures
Whether protecting the sample from outside contamination or the workplace from the bottled toxic waste, closures guarantee tight and reliable seals. With a vast cap selection for best compatibility with any container, tailoring to specific contents is possible. Temperature resistant models allow any procedure to be completed safely. Available in different finishes, any sensitive chromatography sample is protected. The caps are easy to close with one hand and come in many colors to assist with identification.
Screw caps for laboratory bottles
Supplier: MARIENFELD
Screw cap, PP, Thread: GL 45, Colour: Blue
Expand 1 Items
Seals for GL screw caps, DURAN®
Supplier: DWK Life Sciences
Silicone with PTFE coating.
Expand 5 Items
Screw caps with aperture, BOLA
Supplier: Bohlender
Screw cap, made of PPS, with handy knurl, with aperture.
Expand 1 Items
Snap caps for sample bottles, WHEATON®
Supplier: DWK Life Sciences
Natural low density polyethylene.
Expand 4 Items
Snap caps, Corning® Gosselin™
Supplier: Corning
Snap caps, For: Containers, Colour: Natural, LDPE, Corning®, Cap Size: 85 mm, Colour: Natural, LDPE
Expand 1 Items
Screw caps for 30 ml glass bottles, STERILIN®
Supplier: STERILIN
White PP screw cap for use with 30 ml containers.
Expand 1 Items
Screw caps for diagnostic bottles, WHEATON®
Supplier: DWK Life Sciences
Screw caps made of PP, with solid top or open top.
Expand 9 Items
SafetyWasteCaps
Supplier: S.C.A.T.
The SCAT SafetyWasteCaps provide maximum safety for your HPLC liquid disposal. Safely dispose of your liquid laboratory waste without contaminating the ambient air by using SafetyWasteCaps with integrated exhaust air filters. These high-performance filters regulate the air pressure balance and prevent the escape of vapors due to the resulting overpressure in the disposal container. The variety of closures, connections and thread sizes allows optimal adaptation to your HPLC situation. Additional versions with grounding connections, level controls or safety funnels or offer every convenience for safe disposal.
Expand 69 Items
Screw caps with aperture, BOLA
Supplier: Bohlender
Screw caps, made of PP, with handy knurl.
Expand 1 Items
Screw caps for scintillation vials, WHEATON®
Supplier: DWK Life Sciences
White polypropylene construction.
Expand 9 Items
Screw caps bottles, wide neck, Corning® Gosselin™
Supplier: Corning
Screw cap made of HDPE.
Expand 5 Items
Cap for BOD bottle, WHEATON®
Supplier: DWK Life Sciences
This polyethylene cap, complete with a closed cell foam insert, snaps firmly over the flared mouth of Wheaton BOD bottles.
Expand 1 Items
Screw caps, glass filled, WHEATON®
Supplier: DWK Life Sciences
Open top polypropylene glass-filled cap.
Expand 1 Items
Caps for bottles, open top, Microlink®, WHEATON®
Supplier: DWK Life Sciences
Screw caps are ideal for use with biological media, volatile solvents, corrosive chemicals and sensitive compounds.
Expand 11 Items
Screw caps high chem, BOLA
Supplier: Bohlender
Screw caps made of PP, with handy knurl. Sealing insert made of PTFE with elastic sealing lip and an o-ring for balancing unevenness on the bottle neck.
Expand 1 Items
HPLC adapters for solvent supply and waste solvent
Supplier: Merck
Specially developed screw caps for direct instrument connection of Merck S 40 threaded bottles ensure safe handling of solvents in the lab and protect human health, the environment, as well as solvent quality.
Expand 5 Items
Screw caps for standard opening screw thread vials
Supplier: THERMO NATIONAL SCIENTIFIC
Chromatography vial closure, PP, Ø: 8 mm, Black PP open top cap, 5,5 mm hole
Expand 2 Items
Screw caps and septa, 9 mm
Supplier: THERMO NATIONAL SCIENTIFIC
Chromatography vial closures, Ø: 9 mm, Blue PP cap with integral PP membrane, Hardness: -, Septum: PP, Thickness: - mm
Expand 4 Items
Closures for cell counter vials
Supplier: RATIOLAB
Chromatography vial closure, Lids for 25 ml cell counter vials, PE
Expand 1 Items
Dispensing closures for bottles
Supplier: MURRAY S
Dispensing closure for bottles, with flip-up spout, LDPE, aperture 2 mm, LDPE, Thread: 22 mm R6, For bottles: 60/125/175 and 250 ml, Colour: White
Expand 1 Items
Caps for 13-425 screw thread vials
Supplier: THERMO NATIONAL SCIENTIFIC
Chromatography vial closure, Phenolic, Open top screw cap, phenolic cap type, Septum: Red PTFE/White Silicone
Expand 1 Items
HPLC starter kits, Supply V2.0
Supplier: S.C.A.T.
Starter kits consisting of SCAT SafetyCaps, blind plugs, fittings and air valves for the supply of HPLC systems.
Expand 3 Items
Safety Waste Caps, Electrically Conductive
Supplier: S.C.A.T.
SCAT Safety Waste Caps, made of electrically conductive PTFE, are hermetically sealing caps for the safe disposal of your liquid HPLC waste (e.g. solvents, acids, alkalis).
Expand 4 Items
VWR®, Safety Waste Caps
Supplier: VWR Collection
Collect your solvent waste safely without being exposed to solvent vapours or hazardous gases. High quality materials (PTFE, PP) ensure maximum safety for your laboratory staff and environment.
Expand 4 Items
Caps for solvent supplies, b.safe
Supplier: Bohlender
b.safe caps together with fittings, tubing and an air valve form a perfect unit for solvent extraction from laboratory flasks.
Expand 31 Items
Safety Waste Collectors
Supplier: S.C.A.T.
The Safety Waste Collector connects capillaries and tubes of the HPLC system with the disposal system - suitable for the SymLine benchtop feedthroughs and SymLine FLEX.
Expand 14 Items
System waste caps LC, b.safe
Supplier: Bohlender
b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The filling levels of waste containers in laboratory cupboards and workbenches can be reliably monitored. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.