Supplier: VWR Collection

These 3D cubic bags can fit in existing support containers, but can also be supplied together with a matching container made of plastic or stainless steel.

Supplier: VWR Collection

Sturdy bags, ideal for disposing of biologically hazardous waste that must first be autoclaved. Supplied complete with the necessary sealing wires. HDPE, 100 µm thick, orange, with 'Biohazard' label.

Supplier: VWR Collection

Sturdy, temperature resistant bags, ideal for disposing of hazardous waste that must first be autoclaved. Can also be used for autoclaving other products. Supplied complete with sealing wires. PP, 37,5 µm or 50 µm thick, transparent.

Supplier: VWR Collection

The Magnetic Mixing bags offer a sterile, single use mixing container designed to maximise mixing performance while minimising disruptive shear.

Supplier: VWR Collection

These tank liners are single-use bags with an open top, designed to fit in cylindrical vessels.

Supplier: VWR Collection

Sturdy, temperature resistant bags, ideal for disposing of non hazardous waste or hazardous waste that must first be autoclaved.

Supplier: VWR Collection

Sturdy bags, ideal for disposing of non hazardous waste that must first be autoclaved. In PP, 50 µm thick, transparent, with labelling area.

Supplier: Flexico

Clear PP bags, thickness 70 µm, white closure.

Supplier: VWR Collection

These bags are ideal for autoclaving polystyrene containers and other items contaminated by pathogenic agents (petri dishes, microtitre plates, pipettes, bottles, tubes, etc). They can be used for realising and preserving sterile conditions. Made of polypropylene, white coloured.

Supplier: VWR Collection

For safe disposal of laboratory waste such as pipette tips, disposable Petri dishes, sample tubes, etc. PP, 40 µm thick, clear, with or without 'Biohazard' printing.

Supplier: Flexico

Flexible packaging in PP is subject to energy recovery.

Supplier: Brady

Lockout bag made of rugged canvas with drawstrings.

Supplier: Flexico

Clear PE bags, thickness 60 µm, food contact.

Supplier: Saint Gobain Life Sciences

Rubber sampling bags for gas with tube and ebonit tap.

Supplier: VWR Collection

3D cubic bags can fit in existing support containers. These support containers are available in either High Density Polyethylene (HDPE) and Polypropelene (PP), or stainless steel material.

Supplier: THERMO BIOPROCESS DIVISION

Tank liners are gamma irradiated, open single use bags designed to fit in cylindrical drums.

Supplier: NASCO FORT ATKINSON

Cellulose sponges for your environmental monitoring and surface sampling needs.

Supplier: VWR Collection

Bucket liners create an impermeable barrier between the disinfectant and receptacle.

Supplier: DESCO

Storage Bag, Metal-In shielding bubble bags with 50 mm flap, Dimensions: 255×305 mm

Supplier: BURKLE

The sterilised sampling bag SteriBag are ideal for samples in chemistry, pharmaceuticals, medicine, veterinary science and foodstuffs.

Supplier: Flexico

Clear PE bags, thickness 60 µm, food contact.

Supplier: BURKLE

SteriBag StandUp are sterile sample bags with a stand-up base. The special bottom unfolds as soon as the bag is filled. This makes SteriBag StandUp stable and able to stand on its own without a separate stand or support, leaving both your hands free to take the sample and fill the bag. The wire bracket at the closure keeps the bag open, making it easy and convenient to fill. Can be used for samples available as liquids, powders, solids and pastes; suitable for foods and can be frozen.

Supplier: VWR Collection

LDPE Micronova BinLiners™ are ideal for the collection and disposal of waste, collection and transportation of parts or raw materials, and storage in cleanrooms and controlled environments. Thickness of 1 to 6 mm available for a variety of applications; including covering equipment, holding production waste, document storage, lining large production totes and so on.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Keystone Cleanroom Products Pre-sterilised biohazard bags are useful to decontaminate waste or potentially hazardous materials that are exiting the aseptic production area through the autoclave. The use of sterile biohazard bags eliminates the introduction of contamination into the aseptic production area.

Supplier: DESCO

Metal-In static shielding bags are manufactured from a polyester, metal, polyethylene laminate. ESD safe packaging designed for use in cleanroom areas where surface particulate is of concern.

Supplier: DESCO

This aluminised moisture barrier bag is designed to provide packaging for ESD and moisture sensitive items, both inside and outside an ESD protected area. The bags are heat sealable and suitable for vacuum packaging.

Supplier: Flexico

The specific shape of the Doypack® bags allows a good vertical position of the packaging on the shelves. The Paper/PET/CPP laminate provides a good barrier to gases and humidity. The paper layer gives the bag a natural look.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Pre-sterilised and packaged in multiple layers of Tyvek peel pouches and poly bags to gain access into the aseptic area without excessive spraying and wiping with sanitisation agents. The bags are used for the safe and effective removal of biohazardous materials from the aseptic area through the decontamination autoclave.

Supplier: Flexico

Clear bags, zip seal, food contact.

Supplier: VWR Chemicals

This product is a quick and simple solution to collect microobiological samples in livestock housing, animal transportation vehicles, and their washing stations. The purpose is the prevention, detection, and control of infections by viruses (H1N1, African swine fever, PRRS, Circovirus, Newcastle) and bacteria (Salmonella and E. coli including STEC).