You searched for: Electrodes
Electrodes are produced for optimum use in analytical chemistry and biochemical research. Measure various chemical concentrations, pH levels, conductivity, temperature, gas pressure, voltage, and much more with the variety of electrodes available in our catalog. Rugged digital electrodes are suitable for portable field measurements, and certain models have ports that allow for multiple different electrode sensors to be plugged into a single unit for easy interpretation and analysis of results. Easily find the right electrode model for your laboratory today.
pH electrodes, single, ScienceLine
Supplier: SI ANALYTICS
Single electrodes with plug head and Silamid® reference system.
Expand 2 Items
pH half cells, InLab®
Supplier: Mettler - Toledo
pH electrode with glass body and S7 screw head. Recommended for applications where the life time of the pH electrode is significantly shorter than the reference electrode.
Expand 2 Items
pH combination electrodes, IDS®
Supplier: SI ANALYTICS
When digital IDS sensors are connected to the measuring device, they automatically identify themselves with their serial numbers and type designation and transmit their calibration data to the device.
Expand 3 Items
Ion selective electrode, surfactant, Orion™
Supplier: Thermo Orion
This surfactant half cell is a potentiometric sensor for end point detection in titrations of anionic or cationic surfactants in a solution. A potentiometric sensor, it is a surfactant-detecting electrode in anionic or cationic titration which is specifically designed for use on the Orion 960 Autochemistry system.
Expand 1 Items
Multi-parameter electrode, sensION+ 5059
Supplier: Hach
sensION+ 5059 is a combination multi-parameter electrode for determination of pH, conductivity and temperature. It has a plastic body, non-refillable gel reference electrolyte and built-in temperature sensor.
Expand 1 Items
pH electrodes, InLab® Power
Supplier: Mettler - Toledo
Combination pH electrode with SteadyForce™ and S7 screw head for general laboratory applications.
Expand 1 Items
pH electrode for general applications, gel-glass
Supplier: HAMILTON BONADUZ
Gel-Glass is a maintenance-free combination electrode for everyday applications.
Expand 1 Items
pH combination electrodes, AquaLine
Supplier: SI ANALYTICS
These low-maintenance electrodes are ideal for measuring in drinking water, industrial water and sewage range.
Expand 4 Items
Ion selective electrodes, fluoride, Orion™
Supplier: Thermo Orion
These fluoride electrodes are designed for measuring free fluoride ions in aqueous solutions quickly, simply, accurately and economically.
Expand 3 Items
Ion selective electrode, nitrate, IntelliCAL™
Supplier: Hach
IntelliCAL™ ISENO3181 is a digital combination nitrate ion selective electrode (ISE) with a non refillable, double junction reference and built-in temperature sensor. The solid-state sensor design eliminates membrane replacement and allows for dry storage of the ISE.
Expand 3 Items
Ion selective electrodes, silver/sulfide, Orion™
Supplier: Thermo Orion
These electrodes perform quick, simple, accurate and economical measurements of silver and sulfide ions in aqueous solutions. Ideal for performing low-level cyanide and halide titrations.
Expand 2 Items
Ion selective electrode, sodium, sensION+ 9650
Supplier: Hach
sensION+ 9650 is a half-cell sodium ion selective electrode (ISE) with glass body and glass membrane selective to sodium ions in solution. It is recommended for use with the sensION+ 5044 reference electrode.
Expand 1 Items
pH electrodes for general laboratory applications, Polilyte Lab
Supplier: HAMILTON BONADUZ
These robust combination pH electrodes are suitable for general laboratory applications, especially for measurements in emulsions and suspensions.
Expand 5 Items
pH combination electrodes with temperature sensor, ScienceLine
Supplier: SI ANALYTICS
Electrodes with plug head (without cable) or with BNC/DIN plug with fixed cable.
Expand 8 Items
pH electrodes for field measurements, Polyplast™
Supplier: HAMILTON BONADUZ
Polyplast electrodes have a shatterproof plastic shaft. They are ideal for portable measurements or as entry level sensors for basic laboratory applications.
Expand 9 Items
Ion selective electrode, half-cell, fluoride, sensION+ 9655
Supplier: Hach
sensION+ 9655 is a half-cell (reference not integrated) fluoride ion selective electrode with an epoxy body and non-replaceable crystalline membrane selective to fluoride ions in solution.
Expand 1 Items
Reference electrodes, InLab® Reference
Supplier: Mettler - Toledo
Reference electrodes with S7 connector.
Expand 3 Items
Combination pH electrodes, sensION™+
Supplier: Hach
3-in-1 laboratory combination pH electrodes with built-in temperature sensor.
Expand 4 Items
Radiometer Analytical XR110 Reference Electrode (Red Rod, Ground Joint, Screw Cap)
Supplier: Hach
The XR110 reference electrode has a glass body, red rod Ag/AgCl reference technology system, refillable electrolyte (KCl 3 M), ground joint, and porous pin junction.
Expand 1 Items
Ion selective electrodes, nitrate, Orion™
Supplier: Thermo Orion
These nitrate electrodes are designed for measuring nitrate in aqueous solutions quickly, simply, accurately and economically.
Expand 2 Items
Ion selective electrode, half-cell, fluoroborate, Orion™
Supplier: Thermo Orion
This fluoroborate half-cell can be easily and economically rejuvenated.
Expand 1 Items
Orion™ Storage Sleeve and Base
Supplier: Thermo Orion
Protect electrodes from breakage when not in use with the Thermo Scientific™ Orion™ electrode storage sleeve and base.
Expand 1 Items
ORP electrode, sensION+ 5057
Supplier: Hach
sensION+ 5057 is a combination platinum ORP electrode with a glass body and refillable liquid-electrolyte reference. It is dedicated for use with Hach sensION+ labpratory pH (mV) meters.
Expand 1 Items
pH electrodes for food applications
Supplier: HAMILTON BONADUZ
Robust combination pH electrodes especially suited for use in media containing proteins or solid and semi-solid samples, such as meat and cheese.
Expand 4 Items
Ion selective electrodes, Fluoride, IntelliCAL™
Supplier: Hach
IntelliCAL™ ISEF121 is a digital combination fluoride ion selective electrode (ISE) with a non-refillable, single junction reference and built-in temperature sensor. The solid-state sensor design eliminates membrane replacement and allows for dry storage of the ISE.
Expand 3 Items
Combined pH electrodes, Radiometer Analytical
Supplier: Hach
A variety of pH electrodes for different applications. Ideal for use with sense ION+ pH meters or any other meter with BNC connection.
Expand 14 Items
pH electrodes for general laboratory applications, Liq-Glass™
Supplier: HAMILTON BONADUZ
Robust combination pH electrodes for daily laboratory use. Universally applicable, in strong acids as well as in strong bases.
Expand 9 Items
Orion™ 9502BNWP Carbon Dioxide Electrode
Supplier: Thermo Orion
This electrode measures carbon dioxide, carbonate and bicarbonate in aqueous solutions quickly and accurately.
Expand 1 Items
Combined ion selective electrodes, ScienceLine
Supplier: SI ANALYTICS
Electrode, ISE, F 60, Parameter (ISE): Fluoride, pH: 5 - 7, 0...+80 °C, Plug head, For: Determination of Fluoride-ions
Expand 2 Items
Ion selective electrodes, cupric, Orion™
Supplier: Thermo Orion
These electrodes are designed for measuring cupric ions in aqueous solutions quickly, simply, accurately and economically.