Physics Educational Materials

Supplier: PHYWE

Apparatus for detecting that the pressure at the bottom of a container does not depend on its design, but only on the liquid level. For quantitative determination of the hydrostatic pressure and examination of the linear relationship between pressure and liquid level. The liquid pressure at the bottom of the various vessels deforms a highly elastic rubber membrane whose movement is transmitted to a centimeter-graded needle. The deviation can be compensated with weights. The mass and distance of the weight from the pivot point make it possible to quantitatively determine the pressure change. A second pointer can be mounted vertically to visualize fluid level.

Supplier: CORNELSEN EXPERIMENTA

Skarvklämma med skruv. För tråd och plåt med max 1 mm tjocklek.

Supplier: CORNELSEN EXPERIMENTA

Aluminum ring with suspension in three points. Used together with a dynamometer to determine the surface tension in liquids.

Supplier: PHYWE

Supplementary kit for Painting Mechanics 1. Contains 11 components with which a further 18 experiments can be performed in the areas of motion, energy forms and the mechanics of liquids and gases. The experiments assume that components are used from the Tavelmekanik 1 kit. Examples of experiments:

Supplier: CORNELSEN EXPERIMENTA

Apparatus for examining the conversion from electrical energy to light and heat energy. Consists of a plastic container, lid with light bulb (6 V / 5 A) in base and a resistor. The container is filled with water and the temperature change is measured. Equipped with connections for 4 mm banana plug.

Supplier: PHYWE

Quincke interference tube for determining wavelengths and frequencies by interfering with sound waves in air. Consists of two U-shaped metal tubes slidable into each other with a measuring scale. Inputs and outputs with knobs. Three brackets for mounting on a stand. Comes with listening hose.

Supplier: CORNELSEN EXPERIMENTA

Simpler model of Magdeburger hemisphere. Equipped with folding hooks with which the air is evacuated.

Supplier: GR NNA PLASTEMBALLAGE AB

Thin rubber membrane for membranes for pressure boxes and the like. Can be cut to the desired size.

Supplier: CORNELSEN EXPERIMENTA

For experiments with thermoelectric effects. Consists of brazed copper and constant wire. Equipped with connections for 4 mm banana connectors. Mounted on plate with rod, 10 mm.

Supplier: CORNELSEN EXPERIMENTA

Apparatus for demonstrating the movement of a charged body. Consists of plexiglass tubes with two metal electrodes, ball with metallic surface and 4 mm connection sleeves. When connected to a high voltage source, the ball moves back and forth between the electrodes.

Supplier: PHYWE

Practical device for demonstration and determination of the force that keeps a body in balance on an inclined plane.

Supplier: CORNELSEN EXPERIMENTA

Plastic rod with metal tube equipped with an axial and a radial 4 mm connection.