You searched for: Educational Materials

Supplier: PHYWE

The following experiments can be performed.

Supplier: 3B Scientific

Track with two trolleys and other accessories for investigating linear motion. The trolleys move with minimum friction on wheels with high-quality ball-bearings. They are fitted with magnets at their front ends for experiments involving both elastic and inelastic collisions.

Supplier: PHYWE

Detailed description of 31 trials.

Supplier: GR NNA PLASTEMBALLAGE AB

Thin rubber membrane for membranes for pressure boxes and the like. Can be cut to the desired size.

Supplier: PHYWE

Practical device for demonstration and determination of the force that keeps a body in balance on an inclined plane.

Supplier: 3B Scientific

Digital counter/timer for measuring duration of motion, transition times, periods, pendulum periods, frequencies, as well as for counting events or Geiger tube pulses. Includes a speaker that can be turned on and off and power supplies for direct connection to photo gate or a Geiger-Müller counter.

Supplier: CORNELSEN EXPERIMENTA

With the equipment, centrifugal forces that arise during a body's rotation around a specific axis can be measured and examined. The device consists of a plane with a path for a cart. On the underside there is a vertical shaft that is mounted in a bearing. The plane is made to rotate with a laboratory motor connected with a drive belt to the bearing. The experimental trolley is placed on the track and prevented from leaving the track by two bent steel wires. A wire is connected to the trolley that runs over a pulley and on to a dynamometer.

Supplier: 3B Scientific

Educational Materials, Waves and Oscillations, Application: Physics, Rubber band, wound on a board, 25 m, Ø=2 mm

Supplier: PHYWE

Describes 70 different experiments, on 288 pages, that can be performed in the areas.

Supplier: PHYWE

Phywe's new X-ray equipment is specially developed for teaching purposes. Used in laboratory work and demonstrations from the simplest transilluminations to Bragg diffraction and Compton scattering. Tungsten is normally used as a cathode in X-ray tubes. This means that the voltage must be up to about 65 kV before X-rays are formed. Phywe's X-ray tubes only need 10 to 12 kV for the process to start. For the X-ray equipment, there are 3 different X-ray tubes with the anodes made of Cu, Mo and Fe. These are built as plug-in modules and are replaced in a few seconds. Most laboratories can be connected to Phywe's data measurement system COBRA. The X-ray cabinet is equipped with a large space for experimental setups, clearly visible through a sliding door of acrylic plastic containing lead particles. Two safety switches are connected to the door. The equipment meets the EU requirements for X-ray equipment and is CE Approved.

Supplier: 3B Scientific

Spoked wheel with weighted rim for demonstrating conservation of angular momentum. Simple to use due to small wheel radius and ease of suspension. Teachers and students can feel the conservation of angular momentum as they hold the spinning wheel while sitting in a rotating chair or standing on a rotating platform. You can also create the effect of precession by spinning the bicycle wheel and hanging it from a string.

Supplier: PHYWE

With a few simple steps, the ballistic pendulum is quickly rebuilt into a throwing device with a variable/variable firing angle. The ballistic pendulum, a common method for determining the speed of a pistol bullet, is to push them into a sandbag. With the ballistic pendulum, a harmless variant of this experiment can be performed in the classroom.

Supplier: CORNELSEN EXPERIMENTA

Aluminum ring with suspension in three points. Used together with a dynamometer to determine the surface tension in liquids.

Supplier: PHYWE

Supplementary kit for Painting Mechanics 1. Contains 11 components with which a further 18 experiments can be performed in the areas of motion, energy forms and the mechanics of liquids and gases. The experiments assume that components are used from the Tavelmekanik 1 kit. Examples of experiments:

Supplier: CORNELSEN EXPERIMENTA

Light plastic pendulum ball. Suitable for experiments with pressure waves with tambourine.

Supplier: PHYWE

PHYWE table optics for laboratory work with mirrors, light refraction, lenses, eye function and light refraction. Content:

Supplier: PHYWE

The kit contains 30 components i.a. an optical bench, lenses in holders, grids, polarization filters. Together with TESS 1, a total of 70 different experiments can be performed, e.g. study of telescopes, microscopes, the human eye and the plane of polarization.

Supplier: PHYWE

Ballast for operating spectral lamps. Apparatus housing made of impact-resistant plastic. Equipped with carrying handle, footrest and mains switch with control indicator. The lamp voltage is removed via two countersunk sockets for 4 mm banana sockets. For increased safety during use, connect voltage only when the banana plugs are fully inserted into the sleeves. Comes with device cord.

Supplier: GR NNA PLASTEMBALLAGE AB

Trolley, 100 g, of lacquered sheet metal with nylon wheels. Equipped with hook and hole for mounting weights.

Supplier: CORNELSEN EXPERIMENTA

Intended for use on overhead projectors for demonstration of function and principle for different types of motors. Made of strong, transparent plastic. Equipped with suction feet.

Supplier: CORNELSEN EXPERIMENTA

Shows that the bottom pressure in a liquid depends only on the height and not the shape of the container. The fluid pressure is transferred via a rubber diaphragm to an adjustable hand. Comes with four containers of different shapes. Dimensions.

Supplier: PHYWE

Two identical coils with a diameter of 400 mm (2R), 154 turns of winding each and mounted on separate sockets with connection contacts. Distance between coils 200 mm (R). The coils are held together by three detachable rails. Two of these have brackets for wire beam tubes 765-1206. The coils are used, for example, to provide a homogeneous magnetic field in the wire beam tube. Suitable voltage: 7 V DC (well smoothed) if the coils are connected in parallel and 14 V DC for series connection.

Supplier: PHYWE

Equipment for demonstrating photoelectric power and determining Planck's constant. A photocell is equipped with filters that only transmit light of a certain wavelength. The photocell is illuminated with light from a Hg lamp. The potassium cathode then emits electrons that pass over to the unlit anode. Over time, a voltage arises that prevents new electrons from reaching the anode. The resulting voltage is measured with a measuring amplifier and a voltmeter. The measurement is repeated with filters for different wavelengths. Photocell and Hg lamp are equipped with magnets at the bottom for stable installation on the mounting plate. List of equipment.

Supplier: PHYWE

Detailed description of 18 trials.

Supplier: CORNELSEN EXPERIMENTA

Instrument for comparing charge amounts. When charging, a hand is repelled from the jumper it is hung in. Mounted on a plate.

Supplier: PHYWE

Glass tube used to demonstrate standing waves and acoustical forces. When used in conjunction with a sound source (single frequency), plunger to alter the effective length of the tube and cork dust or talcum powder, the tube can be made to resonate and the powder will aggregate at nodes in the tube. Calculation of the wavelength and speed of sound can be calculated from the measurement of these nodes.

Supplier: PHYWE

Equipment for demonstration of the quantum properties of the electric charge, as well as to determine the elementary charge. The experiment is easy to perform and suitable for both laboratory and demonstration using the Videoflex camera (765-1000). With the equipment, the elemental charge can be determined in 3 ways: change of charge by means of an alpha radiator, falling and rising speed with constant capacitor voltage and free voltage and falling speed without electric field.

Supplier: CORNELSEN EXPERIMENTA

For experiments with thermoelectric effects. Consists of brazed copper and constant wire. Equipped with connections for 4 mm banana connectors. Mounted on plate with rod, 10 mm.

Supplier: CORNELSEN EXPERIMENTA

Used for electrostatic experiments.

Supplier: CORNELSEN EXPERIMENTA

For charging attempts. About 50 pcs in a box.