Supplier: Trajan Scientific and Medical

Needle, syringe, Diamond MS, Ultra smooth, Gauge: 23, Length: 50 mm, Ext.Ø: 0,63 mm, Ø int.: 0,24 mm, Type of tip: Cone, Lilac

Supplier: Trajan Scientific and Medical

Needle, syringe, Diamond MS, Ultra smooth hydrophobic treated, Gauge: 22, Length: 51 mm, Ext.Ø: 0,72 mm, Ø int.: 0,37 mm, Type of tip: LC, Red

Supplier: Trajan Scientific and Medical

P25-MS1 plunger, 25 µl

Supplier: Trajan Scientific and Medical

Designed to be installed only with the force of your fingers delivering an easy, leak-free installation for capillary columns without the use of any tools. Developed with the unique, leak- and air-free properties of SilTite™ ferrules, which results in superior air tightness to reduce background noise in sensitive MS applications.

Supplier: Trajan Scientific and Medical

These are plunger-in-barrel syringes. Each plunger is individually fitted for each microsyringe for perfect sealing.

Supplier: Trajan Scientific and Medical

These dispenser and pump syringes incorporated with Diamond technology have been designed and manufactured for a variety of instruments and customer applications.

Supplier: Trajan Scientific and Medical

Needle, Replacement needle, Gauge: 23, Length: 70 mm, Ext.Ø: 0,63 mm, Sleeved side hole

Supplier: Trajan Scientific and Medical

Vespel/graphite GC ferrules are made from quality polyimide/graphite blend. They seal with minimal torque and can be reused and repositioned along capillary columns if not over compressed in the fitting. Due to slight shrinking at high temperatures, they must be retightened after initial temperature cycles to avoid leaks.

Supplier: Trajan Scientific and Medical

The Mitra® is a small, portable device with an absorbent VAMS® tip that is designed to collect a tiny, precise volume of blood. The Mitra device is used for capillary sampling from a fingertip or other site on the body. This approach is less invasive than venipuncture, doesn't require expensive cold shipping, and requires only a small blood volume for dried-matrix analysis.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: Trajan Scientific and Medical

The o-ring prevents gas leaks and maintains a uniform flow path through the inlet, where even small leaks can cause sample loss - affecting accuracy and reproducibility of results.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: Trajan Scientific and Medical

These as-molded, untreated plates are manufactured from a high purity polypropylene copolymer, making them some of the cleanest uncoated plastic plates.

Supplier: Trajan Scientific and Medical

A high-capacity gas purifying system that can remove a combination of oxygen, moisture and hydrocarbons, (greater than C4) from inert gases and hydrogen.

Supplier: Trajan Scientific and Medical

ZPure™ O₂/H₂O gas filters removes oxygen and water from inert gases, He, Ar, N₂ and H₂, making it ideal for use with GC and GC/MS carrier gas lines. It differs from the Zpure dual filter in that it is completely non-hazardous and is recommended for any application requiring ultra-pure gas, free from oxygen and water.

Supplier: Trajan Scientific and Medical

The ZPure™ H₂O 'High Sensitivity Moisture Indicating' Filter is used for applications requiring high efficiency moisture removal. The high sensitivity indicator signals breakthrough at 1 ppm water and changes from blue to brown.

Supplier: Trajan Scientific and Medical

The SPure H₂O/HC Filter removes moisture, oil, dust, and hydrocarbons (C5 and heavier) from dry air and inert gases.

Supplier: Trajan Scientific and Medical

Syringe, chromatography, Replacement removable luer lock fitting (includes 1 Kel-F luer cone and 1 threaded metal adaptor), Pk: 1

Supplier: Trajan Scientific and Medical

A high temperature, low bleed, highly inert GC column for the analysis of dioxins and related compounds.

Supplier: Trajan Scientific and Medical

Syringe, chromatography, HPLC, Gas-tight, with M10 - 1,0 screw thread termination, 500C-HITACHI, Volume: 500 µl, For: L7200/7250, AS1000/2000/4000 LC, Pk: 1

Supplier: Trajan Scientific and Medical

The ZPure™ line of filters removing a wide range of contaminants to trace levels.

Supplier: Trajan Scientific and Medical

Pure-Pass sealing mats protect wells from leaks, contamination and evaporation during sampling and storage.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner.

Supplier: Trajan Scientific and Medical

Guaranteed liquid and gas tight to 3,5 bar. The plunger extends into the needle tip. Ideal for dispensing very small liquid volumes.

Supplier: Trajan Scientific and Medical

Septa, BTO premium high-temperature centre guide GC septa, Ø: 9 mm, Max. temp.: 400 °C

Supplier: Trajan Scientific and Medical

Big Trap gas purifiers are designed for bulk purification applications, or where several instruments are plumbed from a single source.

Supplier: Trajan Scientific and Medical

These columns are suitable for environmental analyses (EPA methods 608 and 8081), pesticides/herbicides, drugs of abuse, pharmaceuticals.

Supplier: Trajan Scientific and Medical

The ZPure™ H₂O/HC filter removes moisture and hydrocarbons from dry air or inert gases. The co-free moisture indicator signals breakthrough when it changes from green to blue.

Supplier: Trajan Scientific and Medical

The ZPure™ H₂O filter removes moisture to low ppb levels. The Co-free moisture indicator signals breakthrough when it changes from green to blue.

Supplier: Trajan Scientific and Medical

Micro Extraction by Packed Sorbent (MEPS™) is a new development in the field of sample preparation by SPE (solid phase extraction). The MEPS™ product consists of two parts, the MEPS™ syringe and the MEPS™ Barrel Insert and Needle assembly (BIN). The MEPS™ approach to sample preparation is suitable for reversed phases, normal phases, mixed mode and ion exchange chemistries. Because MEPS™ BINs can be used for sample volumes as small as 10 µl it makes them particularly well suited to on-line use with LC-MS analysis of volume limited samples.