308 Results for: "NICKEL ELECTRO"

Supplier: NICKEL ELECTRO

Stainless steel.

Supplier: NICKEL ELECTRO

These circulating water baths are available in two ranges for circulating just water up to 99 °C or oil up to 130 °C. Operating temperatures below ambient can be achieved using an optional refrigerated dip cooler. Units have touch pad controls with easy wipe clean fronts which are chemical resistant and splash proof.

Supplier: NICKEL ELECTRO

Stainless steel.

Supplier: NICKEL ELECTRO

Stainless steel, rust-proof, with spout.

Supplier: NICKEL ELECTRO

Stainless steel 18/8 non-magnetic, bright finish. Double ended spatulas with trowel shaped scoops for handling large quantities of material.

Supplier: NICKEL ELECTRO

Stainless steel.

Supplier: NICKEL ELECTRO

Stainless steel. Double spatula with offset spoon end and scraper end.

Supplier: NICKEL ELECTRO

Designed for applications that require continuous boiling. Baths have a corrosion resistant stainless steel working environment, with heater and safety cut out concealed underneath, all housed in a durable, chemical resistant, powder coated paint finished outer case.

Supplier: NICKEL ELECTRO

Crucible lid, For Ø: 35 mm, Thickness: 0,7 mm, Stainless steel 304

Supplier: NICKEL ELECTRO

Stirrer, Overhead Stirrer

Supplier: NICKEL ELECTRO

Digital and analogue linear shaking water baths with a stainless steel tank housed in a durable outer case. The corrosion resistant reciprocating trolley readily accepts perforated clip trays for holding flasks and test tube racks. The trolley is easily removed for cleaning purposes and a stainless steel recessed top accommodates flasks, clip trays etc prior to and after immersion. The 28 litre baths include a drain tap for convenient emptying. Digital shakers have splash proof controls featuring an advanced PID temperature controller with a LED display, allowing observation of set and actual temperature simultaneously to 0,1 °C resolution. They also feature a highly accurate PT 100 sensor with the added advantage that it is immersed in the water for accurate temperature measurement. An over-temperature alarm operates on digital baths at 4 °C above set point which switches of the heaters to protect the users work until a safe working temperature is achieved. Analogue model has an electronic temperature controller and an electronic speed control for shaking. The heater and safety device are concealed beneath the tank allowing for easy cleaning.

Supplier: NICKEL ELECTRO

Fixed temperature baths with concentric ringed lids. The steam produced provides an effective source of heat for samples that may otherwise be thermally damaged by a naked flame. Models 1020G and 1026G are gas baths, which do not have their own electrical power source, they are designed to be heated by a hotplate or gas burner.

Supplier: NICKEL ELECTRO

The Cyclone mixers create a vortex in the tube, which gives a highly effective mixing action. The Cyclone+ is designed for tube, micro plate, flask and micro tube mixing at slow speeds using accessory platforms which can be quickly interchanged. It is ideal for pre-treating paraffin specimens for FISH assys, hybridization step, pre-warm the probe to room temperature, vortex and spin down.

Supplier: NICKEL ELECTRO

Round sterilising pipette cans made of stainless steel.

Supplier: NICKEL ELECTRO

Two independently controlled unstirred baths are combined in one space saving unit. A painted durable steel outer case houses two corrosion resistant stainless steel tanks, each containing a perforated tray. This digital range is ideal where two different temperatures and immersion depths are routinely required, and for incubation routines requiring minimal heat loss. The heaters are mounted on the underside of each tank giving a totally clear reservoir.

Supplier: NICKEL ELECTRO

Pure nickel (99,6%).

Supplier: NICKEL ELECTRO

Stainless steel casing, stove enamelled finish and cast aluminium plate. Units accept retort rods.

Supplier: NICKEL ELECTRO

Stainless steel 18/8, anti-magnetic. Straight tongs with bright finish.

Supplier: NICKEL ELECTRO

Made of aluminium.

Supplier: NICKEL ELECTRO

These soil sieves designed for educational use have an aluminium body with stainless steel mesh.

Supplier: NICKEL ELECTRO

Clifton tube rotators have a small footprint and are ideal for general use. Available as fixed or variable speed models and with hygenic coated body which actively inhibits bacterial growth.

Supplier: NICKEL ELECTRO

This steriliser is a laboratory steriliser, using steam to sterilise small unwrapped instruments and non-porous equipment which displaces air passively from the chamber and its load by steam generated within the steriliser.

Supplier: NICKEL ELECTRO

Pure nickel (99,6%). With grooved tips. For easy, safe handling of crucibles made from a wide variety of materials.

Supplier: NICKEL ELECTRO

These thermostatically controlled analogue stirred baths have a corrosion resistant stainless steel tank and durable outer case. Immersed components are corrosion resistant.

Supplier: NICKEL ELECTRO

Immersion cooler without temperature control designed to be used in conjunction with Clifton NE4 stirred or circulating water baths, the unit runs continuously with the bath providing the temperature control. The immersion coil fits into the rear access hole behind the thermostirrer without loss of working area.

Supplier: NICKEL ELECTRO

Crucible lid, For Ø: 25 mm, Thickness: 1,0 mm, Zirconium

Supplier: NICKEL ELECTRO

Anodised aluminium, with square base.

Supplier: NICKEL ELECTRO

Pure nickel (99,6%).

Supplier: NICKEL ELECTRO

Stainless steel 18/8, non magnetic, bright finish.

Supplier: NICKEL ELECTRO

Stainless steel. With extra-long handles. For milk sample collection and a wide range of other laboratory and industrial applications.