"HUBER"

Supplier: HUBER

Thermal fluids with a wide range of operating temperatures and good thrmodynamic properties for use in circulators and heating systems where water is not appropriate.

Supplier: HUBER

Adaptor, 90°, M16×1 female thread to M16×1 male thread, Thread: M16x1

Supplier: HUBER

This gateway enables the connection of temperature control units to Profibus systems.

Supplier: HUBER

The TC range of immersion coolers are a flexible solution for a variety of cooling tasks. They are universally used for rapid cooling of fluids. Typical applications include counter-cooling for heat circulation thermostats or replacing cooling by dry ice, they are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised use, for cooling tasks which require continuous cooling or as a variant with temperature control and a PT100 probe.

Supplier: HUBER

The Pilot Remote software enables the complete remote control of temperature control units with Pilot ONE through a Windows PC.

Supplier: HUBER

This breather controller enables small pressurisation of the expansion vessel.

Supplier: HUBER

This air-cooled chiller provides a dedicated cooling service to all small bench top rotary evaporators and features a unique space-saving L-form. When placed on a rotary evaporator the RotaCool requires almost no additional space.

Supplier: HUBER

Immersion thermostats form the basis of many different combinations with polycarbonate or stainless steel bath vessels. All models are fitted with a powerful pressure/suction pump and meet the requirements of Safety Class III (FL) for use with flammable fluids. Temperatures down to −30 °C can be achieved in combination with a refrigerated bath. A screw clamp is included allowing the thermostats to be easily mounted on any vessels. A pump adapter for external temperature control and cooling coils for a cooling water connection are available as optional accessories.

Supplier: HUBER

These compact refrigerated circulators with insulated refrigeration baths are ideal for direct temperature control from −90 up to +200 °C. The low bath volume and high heating and cooling capacity means short heating and cooling rates, which can be increased by using the optional displacement inserts. Optional calibration inserts enable circulators to be used as calibration baths.

Supplier: HUBER

A range of control cables is available for USB, RS232, RS485 or analogue interfaces (AIF). Cables are also available for external control signal (ECS), a potentialfree contact (POKO) or for an external float switch (LEVEL).

Supplier: HUBER

These insulated stainless steel baths are available in 3 standard sizes and can be customised to suit requirements.

Supplier: HUBER

These circulators, with insulated refrigeration baths, are designed for direct temperature control from −30 up to +200 °C.

Supplier: HUBER

Com.G@te®. The interfaces are integrated RS232 (bi-directional), RS485 (bi-directional), ECS external control signal, volt free contact, AIF analogue interface 0/4 to 20 mA or 0 to 10 V (bi-directional). Connections comply with NAMUR standard.

Supplier: HUBER

For external thermo regulation applications.

Supplier: HUBER

Flexible braided hoses suitable for water and water/mono ethylene glycol mixtures up to 50%.

Supplier: HUBER

Immersion thermostats are suitable for controlling the temperature of any bath, includes screw clamp allows the thermostats to be easily mounted on any vessels. All models are fitted with a powerful pressure/suction pump. Temperatures down to −30 °C can be achieved in combination with a refrigerated bath. A pump adapter for external temperature control and cooling coils for a cooling water connection are available as optional accessories.