Supplier: Merck

Vented Millex®-GS filter units are syringe filters for sterilisation of low volume aqueous solutions where venting is desired.

Supplier: Cytiva (Formerly Pall Lab)

Exceptional chemical and temperature compatibility. Ideal for filtration of gas and organic solvents. Prevent spurious peaks on chromatograms allowing accurate experimental results. HPLC certified for low level of UV-absorbing extractables.

Supplier: Cytiva (Formerly Pall Lab)

Simplifies scale up and minimises revalidation; no need to change membrane materials during transition to pilot or production. PP housing; four membrane chemistries assure compatibility with a wide range of fluids.

Supplier: Merck

Syringe filters with hydrophobic PVDF membrane. Used in vacuum line protection, transducer protection and gas filtration. Available as either 25 mm or pump-driven Millex®-FG₅₀ 50 mm diameter filters.

Supplier: Sartorius

Minisart® PES with polyethersulfone (PES) is optimal for highest flow rates and a pH of 2 - 13. Type 1776D with a pore size of 0,22 µm can be used for sterile filtration and has a male Luer slip outlet. Version ACK is individually packed and sterilised by ethylene oxide (EO).

Supplier: Merck

Automation compatible filter units are specially designed to provide efficient filtration for dissolution and other automated sample preparation applications.

Supplier: Sartorius

Minisart® RC with hydrophilic regenerated cellulose (RC) is optimised for aqueous liquids and solvents with a pH of 3 - 14 and is stable against DMSO. With a pore size of 0,2 µm that can be used for sample preparation and sterile filtration.

Supplier: Cytiva (Formerly Pall Lab)

These XT Acrodisc® units with Mustang® Q membrane are designed for laboratory use and scale-down process development.

Supplier: Merck

These syringe filters with PES membrane and PVC housing are suitable for filtration and venting purposes.

Supplier: Sartorius

Elimination of particles from samples prior to HPLC or other chromatographic analysis is essential in order to maintain the integrity of the chromatography column and to maximise its operating life time. Minisart® syringe filters optimised for sample preparation consist of a polypropylene (PP) housing and membrane components featuring maximum chemical compatibility and minimum extractables to ensure excellent results. Due to the typical range of volumes from less than 1 ml to 100 ml these filters are available in three different diameters with an effective filtration area of 0,12, 1,7 and 4,8 cm².

Supplier: Cytiva (Formerly Pall Lab)

Acrodisc™ syringe filters with Supor™ membrane deliver high flow rates and low protein binding.

Supplier: Sartorius

Minisart® NY with hydrophilic polyamide (nylon) is optimised for aqueous liquids and solvents with a pH of 3 to 14. Type 17845 with a pore size of 0,2 µm can be used for sample preparation and sterile filtration. It has a male Luer slip outlet and version ACK is individually packed and sterilised by ethylene oxide (EO).

Supplier: Merck

Filters for sterilising or clarifying biological solutions. The larger filtration area increases flow rate and throughput. It also makes it easier to filter solutions because it reduces the pressure required to empty the syringe.

Supplier: Cytiva (Formerly Pall Lab)

Maximise throughput for hard to filter samples. Reduce clogging, use alone or in series with final membrane filter to increase flow rate and throughput.

Supplier: Cytiva (Formerly Pall Lab)

Optimised to provide the most consistent results when analysing ionic species. Certified for low level extractables detected by conductivity.

Supplier: Merck

HPLC certified filters for the filtration of organic and aqueous solutions in HPLC.

Supplier: Sartorius

Membrane adsorber units with ion exchange membranes (stabilised reinforced cellulose) are ideal for capturing of large proteins and viruses as no size exclusion effects can be observed.

Supplier: Merck

Automation compatible filter units are specially designed to provide efficient filtration for dissolution and other automated sample preparation applications.

Supplier: Cytiva (Formerly Pall Lab)

Useful for prefiltration of particulate laden aqueous samples, serum filtration and dissolution testing.

Supplier: Cytiva (Formerly Pall Lab)

Versatile filter for both aqueous and solvent-based sample filtration. Excellent chemical compatibility with esters, bases and alcohols.

Supplier: Merck

Automation compatible filter units are specially designed to provide efficient filtration for dissolution and other automated sample preparation applications.

Supplier: Sartorius

Minisart® NML with surfactant-free cellulose acetate (SFCA) is the best choice for all aqueous solutions and oils with a pH of 4 - 8. With a pore size of 0,2 µm that can be used for sterile filtration and has a male luer lock outlet. Only available in the EU/EEA and registered countries

Supplier: Merck

Automation compatible filter units are specially designed to provide efficient filtration for dissolution and other automated sample preparation applications.

Supplier: Whatman products (Cytiva)

Cytiva's Whatman Anotop Plus sterile syringe filter with glass microfiber prefilter is compatible with most organic and aqueous solutions for use in a wide variety of applications.

Supplier: Whatman products (Cytiva)

Whatman ReZist range of syringe filters has been specifically designed to be resistant to organic solvents.

Supplier: Whatman products (Cytiva)

Whatman Puradisc syringe filters from Cytiva's business combine premium quality with economic efficiency. They are well suited for rapid, routine syringe filtration of samples up to 100 ml.

Supplier: Whatman products (Cytiva)

Whatman Puradisc syringe filters from Cytiva's business combine premium quality with economic efficiency. They are well suited for rapid, routine syringe filtration of samples up to 100 ml.

Supplier: Whatman products (Cytiva)

Whatman Puradisc H-PTFE syringe filter contains a hydrophilic membrane that is chemically stable and inert. The H-PTFE membrane exhibits low protein binding and can be used for both aqueous and aggressive organic solvents.

Supplier: Whatman products (Cytiva)

Whatman Puradisc syringe filters with RC membrane are an excellent choice for any application requiring a chemically resistant, hydrophilic, low protein binding membrane. This filter can be used for both aqueous and aggressive organic solvents.

Supplier: Whatman products (Cytiva)

Whatman Puradisc syringe filters from Cytiva's business combine premium quality with economic efficiency. They are well suited for rapid, routine syringe filtration of samples up to 100 ml.