Supplier: VWR Collection

Porcelain desiccator plates. Central hole Ø 20 mm, filter holes Ø approximately 5 mm. Suitable for use with any desiccators with corresponding diameter.

Supplier: Merck

Sicapent is a granular dessicant comprising ~75% phoshorus pentoxide on an inert inorganic carrier.

Supplier: VWR Collection

Borosilicate glass 3.3

Supplier: VWR Collection

Borosilicate 3.3 glass.

Supplier: Whatman products (Cytiva)

Desiccant pack ensure that DNA sampling cards remain dry during transport or storage.

Supplier: VWR Collection

Borosilicate 3.3 glass.

Supplier: Bohlender

Silica gel with colour indicator.

Supplier: Thermo Fisher Scientific

CAS No.: 81133-20-2

Supplier: DWK Life Sciences

DURAN® clear borosilicate glass 3.3, vacuum desiccator with Mobilex screw thread without porcelain plate.

Supplier: Bohlender

Desiccator cabinets, PC ESD, have a reinforced aluminium frame with panels made of antistatic polycarbonate and an easy to read electronic hygrometer. They are mainly used for temporary storage of components for electronic products.

Supplier: Bohlender

Desiccator cabinets, transparent acrylic, aluminium frame with panels made of acrylic glass, which are suitable for long-term storage.

Supplier: Bohlender

These transparent acrylic cabinets have solid 25 mm thick walls, a circular silicone seal and a vacuum gauge (0 to 760 mm of mercury).

Supplier: Bohlender

Transparent PPMA cabinet with reinforced aluminium frame, unit has a door with a foam rubber gasket and magnetic strip. Designed for storing or drying humidity sensitive products using silica gel. The controlled environment inside the desiccator is ideal for storing reference materials, retained samples, metallographic specimens, tobacco and DNA-samples.

Supplier: DWK Life Sciences

Clear DURAN®, borosilicate glass 3.3, choice of models with flat flange, NOVUS NS 24/29 junction, and outlet in lid with stopcock or desiccators with flat flange without junction and lid with a knob.

Supplier: Bohlender

Aluminium frame with panels made of acrylic glass, including four shelves made of polycarbonate, tray, hygrometer and desiccant, usable with up to 38 shelves, stackable.

Supplier: Bohlender

Cabinet has a reinforced aluminium frame, lightproof panels made of black acrylic glass which prevent light incidence and protect against ultraviolet radiation. Specially designed for the storage of substances to the exclusion of light transmission and ultraviolet radiation.

Supplier: Palbam

Bench top N₂ purge desiccator cabinets made from stainless steel 304, units have an electropolished finish and static dissipative PVC window. Cabinets cut nitrogen expenses by up to 80%, automate clean, dry benchtop storage eliminating moisture & oxygen related degradation and optimise yields. An appropriate flow of nitrogen is introduced into the upper section of the desiccator; the heavier air is then purged out of the bottom. Ideal for use with semiconductor components, biological and pharmaceutical samples, and other sensitive materials. Fully integrated turnkey system takes 30 s to install.

Supplier: DWK Life Sciences

Stainless steel 1.4301, Type 304, rust-free.

Supplier: Bohlender

The Auto Big Star desiccator cabinet has an aluminium frame with panels made of acrylic glass, including two stainless steel shelves, hygrometer and mounted drying unit, usable with up to eight shelves.

Supplier: DWK Life Sciences

Desiccator, Plate, Porcelain, Ø: 280 mm

Supplier: Thermo Fisher Scientific

CAS No.: 81133-20-2

Supplier: Bohlender

This transparent PMMA cabinet has a reinforced aluminium frame, forward opening door with foam rubber gasket and magnetic strip. Ideal for wide products such as A3 sheets or conductor boards.

Supplier: Bohlender

Aluminium frame with 2-pane insulation (inside glass, outside acrylic glass), including four shelves made of PC, usable with up to max. 26 shelves. Integrated heating (850 W) with temperature sensor and air circulation. Electrical power connection 230 V/50 Hz is required.

Supplier: Bohlender

Clear polycarbonate lockable desiccators with single door with snap fit closing and integrated gasket ensuring easy opening and tight closure. Temperature resistant from −35 to +70 °C, suitable for use under normal pressure.

Supplier: Bohlender

Clear, PMMA, reinforced aluminium frame with panels made of acrylic glass.

Supplier: Bohlender

PC desiccator cabinet which has reinforced aluminium frame with antistatic acrylic panels and easily readable electronic hygrometer. Mainly used for temporary storage of components for electronic products.

Supplier: Bohlender

Clear polycarbonate desiccators for gas filling with single door with snap fit closing and integrated gasket ensuring easy opening and tight closure.

Supplier: Bohlender

Clear polycarbonate portable desiccator with convenient handle. Door with snap fit closing and integrated gasket ensuring easy opening and tight closure. Temperature resistant from −35 to +70 °C, suitable for use under normal pressure.

Supplier: Bohlender

Clear, polycarbonate. Each compartment has one door with snap fit closing and integrated gasket ensuring easy opening and tight closure. Temperature resistant from −35 to +70 °C, suitable for use under normal pressure.

Supplier: DWK Life Sciences

DURAN® clear borosilicate glass 3.3, vacuum desiccator with Mobilex screw thread in the lid with stopcock. With desiccator base with flat flange, no outlet, PBT screw cap with pierced aperture GL 32.