You searched for: Chromatography Spare Parts

Supplier: Agilent

Vespel is a polyimide with low wear and high chemical resistance. Vespel tolerates a pH range of 0 to 10.

Supplier: Agilent

These torch supplies are equivalent to those from PerkinElmer ICP-OES for complete confidence.

Supplier: Agilent

ICP-OES supplies and accessories help you maintain the superior performance of your ICP-OES System.

Supplier: Agilent

The mixing/separation assembly is a perfect match for your PerkinElmer FIMS/FIAS system.

Supplier: Agilent

Agilent burner chamber assemblies for PerkinElmer AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Agilent

MP-AES Sample Kits provide convenient kits for handling aqueous/acidic and organic samples. Select the appropriate one for your application.

Supplier: Agilent

A vacuum degasser is recommended for maximum sensitivity in the low UV wavelength range; high injection precision; high retention time reproducibility; and flow rates below 0,5 ml/min.

Supplier: Agilent

These graphite platforms and tubes for PerkinElmer graphite furnace AA systems are quality tested to ensure every batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance, and lifetime.

Supplier: Agilent

These igniter supplies are equivalent to the PerkinElmer ICP-OES versions for complete confidence.

Supplier: Agilent

Agilent supplies are equivalent to PerkinElmer AA supplies, so you can be confident that they will integrate seamlessly with your PerkinElmer system.

Supplier: Agilent

These sample introduction supplies are equivalent to PerkinElmer AA supplies, so you can be confident that they will integrate seamlessly with PerkinElmer AA system.

Supplier: Agilent

These torches are suitable for PerkinElmer ICP-MS systems.

Supplier: Agilent

A range of vacuum pump supplies is available to ensure the accuracy and performance of your ICP-MS vacuum system.

Supplier: Agilent

Solvent cabinet for Infinity II prime system

Supplier: Agilent

Agilent burner chamber assemblies for PerkinElmer AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Agilent

Features and specifications for the Intuvo Guard Chips.

Supplier: Agilent

Filters for PerkinElmer ICP-OES systems.

Supplier: Agilent

These spray chambers and supplies are fully compatible with your PerkinElmer ICP-OES.

Supplier: Agilent

These ion lenses are equivalent to the PerkinElmer ICP-MS versions for complete confidence.

Supplier: Agilent

These coils are equivalent to PerkinElmer ICP-MS coils for complete confidence.

Supplier: Agilent

These are the supplies you need for your Markes Thermal Desorber.

Supplier: Agilent

Sample probe, carbon fiber, 1,0 mm Int.Ø (2 blue bands), use with Z-drive assembly, For: ASX-500 autosampler series

Supplier: Agilent

These gas line supplies add stability and functionality to even the most basic ICP-MS System calibrations.

Supplier: Agilent

The 4100/4200 Microwave plasma-atomic emission spectrometer runs entirely on air, which means your lab can eliminate flammable and expensive gases. It's safer and more cost efficient than other spectrometers. The 4100/4200 MP-AES enables superior detection and can perform unattended multi-element analyses.

Supplier: Agilent

The ISIS 3 dramatically increases the productivity of both the Agilent 7800 ICP-MS and the Agilent 7900 ICP-MS while also allowing high matrix samples to be run for extended periods of time.

Supplier: Agilent

Preperation LC standard 2

Supplier: Agilent

The Quick-Connect torch module for PerkinElmer ICP-OES includes the torch, mounting block, 2 mm alumina injector, Scott spray chamber, and Cross-Flow nebuliser.

Supplier: Agilent

Agilent uses high-quality graphite and applies stringent quality controls to ensure contamination free and consistency of our contact cylinders for your PerkinElmer graphite furnace AA system. The standard THGA graphite contact cylinders, feature a modified injection port area that helps to minimise condensation and improve analytical performance with difficult matrices. The HGA contact cylinders have shaped graphite contacts to completely encase the graphite tube, ensuring the tube is positioned in a defined environment for uniform radiation conditions.

Supplier: Agilent

The Programmable Sample Dispensers (PSD) are high-capacity autosamplers that are used with Graphite Furnace AA.

Supplier: Agilent

These support adaptors are fully compatible with your PerkinElmer ICP-MS.