153 Results for: "Steris"

Supplier: Steris

A diluent for surface sterilants, disinfectants, sanitizers, or cleaners used in cleanrooms or other critical environments; meets USP specifications and is double bagged for easy entry into cleanrooms or aseptic areas.

Supplier: Steris

CIP 100® detergent is a proprietary blend of potassium hydroxide, an advanced surfactant system and other performance-enhancing ingredients that provide multiple cleaning mechanisms. This low foaming product removes a wide range of process residues, from fermentation by-products to silicone-based emulsions and lubricants, and is ideal for use in clean-in-place (CIP), clean-out-of-place (COP) and manual applications.

Supplier: Steris

STERIS' Spor-Klenz® Concentrate cold sterilant is a liquid sporicide specifically formulated for sterilization and disinfection of hard environmental surfaces. It has an easy one-step dilution and be applied manually, sprayed or fogged.

Supplier: Steris

CIP 200® Acid Detergent is a proprietary blend of phosphoric acid, an advanced surfactant system and other performance-enhancing ingredients that provide multiple cleaning mechanisms. This low foaming detergent is ideal for use in CIP, COP and manual applications for a variety of applications including derouging and passivation.

Supplier: Steris

STERIS' Vesta-Syde® SQ 128 ready to use quaternary ammonium disinfectant is specifically formulated for disinfection of hard surfaces. The Ready to Use solution can be applied manually or sprayed.

Supplier: Steris

Test packs consist of preassembled single-use test packs designed to evaluate the performance of the air removal system of a pre-vacuum equipped sterilizer.

Supplier: Steris

STERIS' LpH® III st Phenolic disinfectant is a liquid concentrate specifically formulated for the disinfection of hard surfaces. The use-dilution can be applied manually or sprayed.

Supplier: Steris

STERIS' Vesphene® III se Phenolic disinfectant is a liquid concentrate specifically formulated for the disinfection of hard surfaces. The use-dilution can be applied manually or sprayed.

Supplier: Steris

Foam 140® Alkaline detergent is a proprietary blend of surfactants, solvents and other performance-enhancing ingredients that provide multiple cleaning mechanisms. When applied with foam spray equipment, it generates a clinging foam to increase contact time and reduce labor costs.

Supplier: Steris

STERIS' ProKlenz® NpH st detergent removes residue from hard surfaces even from the most critical surfaces. It is formulated with multiple surfactants to clean a broad spectrum of soils.

Supplier: Steris

STERIS' Vesta-Syde® SQ 128 ready to use quaternary ammonium disinfectant is specifically formulated for disinfection of hard surfaces. The Ready to Use solution can be applied manually or sprayed.

Supplier: Steris

LabKlenz™ 100 Detergent is a phosphate-free, liquid, alkaline detergent for use in automated laboratory glassware washing applications. It is formulated with corrosion inhibitors for enhanced materials compatibility.

Supplier: Steris

STERIS' Process NPD® st Sterile One-Step germicidal detergent is a liquid concentrate specifically formulated for the disinfection of hard surfaces. The use-dilution can be applied manually or sprayed.

Supplier: Steris

ProKlenz® NpH Neutral Detergent is a proprietary blend of surfactants, solvents and other performance-enhancing ingredients that provide multiple cleaning mechanisms.This low foaming product removes a wide range of process residues and is ideal for use in CIP, COP, and manual applications.

Supplier: Steris

STERIS' 0.525% or 5.25% Hypochlorite WFI sterile solution removes residue from hard surfaces even from the most critical surfaces. Oxidizing cleaners can be extremely effective with tough soils.

Supplier: Steris

Minncare 1% Test Strips verify adequate concentration of a 1% Minncare solution during sanitization of your high purity water system

Supplier: Steris

Color coded for fast identification, these purple Vis-U-All high temperature sterilization pouches are validated for use with ethylene oxide and steam sterilization.

Supplier: Steris

STERIS' Vesta-Syde® SQ 64 ready to use quaternary ammonium disinfectant is specifically formulated for disinfection of hard surfaces. The ready to use solution can be applied manually or sprayed.

Supplier: Steris

STERIS' Vesta-Syde® SQ 64 ready to use quaternary ammonium disinfectant is specifically formulated for disinfection of hard surfaces. The ready to use solution can be applied manually or sprayed.

Supplier: Steris

The Dart® daily air removal test is a pre-assembled Bowie-Dick test pack products used in monitoring healthcare steam sterilizers.

Supplier: Steris

These printer papers are commonly used on medium sterilizers and washers.

Supplier: Steris

Glass-Klenz Detergent is a low-foaming, chelant-based, liquid detergent for cleaning laboratory glassware.

Supplier: Steris

STERIS' Process NPD® One-Step germicidal detergent is a liquid concentrate specifically formulated for the disinfection of hard surfaces. The use-dilution can be applied manually or sprayed.

Supplier: Steris

STERIS' Spor-Klenz® Ready to use sterilant is a liquid sporicide specifically formulated for sterilization and disinfection of hard environmental surfaces. It can be used straight out of the container and be applied manually, sprayed or fogged.

Supplier: Steris

Spor-Klenz® ready-to-use disinfectant wipes are specifically formulated for convenient disinfection of hard surfaces.

Supplier: Steris

STERIS' Vesphene® III st Phenolic disinfectant is a liquid concentrate specifically formulated for the disinfection of hard surfaces. The use-dilution can be applied manually or sprayed.

Supplier: Steris

STERIS' LpH® III se Phenolic disinfectant is a liquid concentrate specifically formulated for the disinfection of hard surfaces. The use-dilution can be applied manually or sprayed.

Supplier: Steris

STERIS' Septihol® Ready to use alcohol solution removes residue from hard surfaces. It can be used straight out of the container and be applied poured or sprayed. Since it contains no stabilizers or denaturants, it evaporates quickly and completely.

Supplier: Steris

STERIS' 6% Hydrogen Peroxide WFI sterile solution removes residue from hard surfaces even from the most critical surfaces. It is formulated to be a low residue cleaner with minimal organic carbon.

Supplier: Steris

CIP 300® Neutral detergent is a proprietary blend of surfactants and other performance-enhancing ingredients. This low foaming product removes a wide range of process residues and is ideal for use in CIP, COP, and manual applications.