277 Results for: "CHEMetrics"

Supplier: CHEMetrics

The test kits utilize CHEMetrics Titrets® ampoules. Titrets ampoules use a reverse titration technique to measure analyte concentration levels (titrant volume inside the ampoule is fixed while the sample volume is varied).

Supplier: CHEMetrics

Hydrogen Peroxide Instrumental Test

Supplier: CHEMetrics

CHEMets® Hydrazine Visual Test Kit 0 to 0.5 ppm

Supplier: CHEMetrics

The K-6020D Iron (total and soluble) HR CHEMets® test kit (10 to 100 ppm) comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): HR CHEMets® refill, flat comparator, 25 ml sample cup, 3.0 ml syringe, iron activator solution, and instructions. Note: Kit contains only enough activator solution to perform approximately 7 total iron tests.

Supplier: CHEMetrics

The test kits utilize CHEMetrics Titrets® ampoules. Titrets ampoules use a reverse titration technique to measure analyte concentration levels (titrant volume inside the ampoule is fixed while the sample volume is varied).

Supplier: CHEMetrics

Nitrate Instrumental Test Zinc Reduction

Supplier: CHEMetrics

Manganese Instrumental Test 0 to 30 ppm

Supplier: CHEMetrics

C-4610 High Range Formaldehyde Comparator is a component of K-4605 Formaldehyde CHEMets Visual Test Kit and is designed to be compared against the color formed in R-4815 Glycol/Formaldehyde CHEMets Refill. The comparator's range is applicable for many boiler water applications. Color standards are pink to purple in color and cover a range of 1 to 10 ppm Formaldehyde.

Supplier: CHEMetrics

CHEMets® Iron Total Soluble HR Visual Test Kit 250 to 2500 ppm

Supplier: CHEMetrics

CHEMets® Hydrogen Peroxide HR Visual Test Kit 125 to 1250 ppm

Supplier: CHEMetrics

MiniPet is a registered trademark of Tricontinent Scientific, Inc.

Supplier: CHEMetrics

Features of titrets technology: Dependable, sealed single-use titrants Fast, easy procedure, no need to count drops No burettes or other equipment necessary Perform a titration ANYWHERE

Supplier: CHEMetrics

Chromate Instrumental Test 0 to 3.50 ppm

Supplier: CHEMetrics

Iron Total Ferrous Instrumental Test

Supplier: CHEMetrics

Vacu-vials Kits require the use of the V-2000 Photometer or a spectrophotometer capable of accepting a 13 mm diameter round cell. Instrument sold separately. Although the test kit contains 30 ampoules, a fresh reagent ampoule blank must be prepared for each series of tests; therefore, the number of samples that can be tested with each kit will vary from a maximum of 29 to a minimum of 15.

Supplier: CHEMetrics

C-6802 Monochloramine Comparator is a component of K-6802 Monochloramine CHEMets Visual Test Kit and is designed to be compared against the color formed in R-1402 Monochloramine CHEMets Refill. The comparator's range is applicable to many wastewater and drinking water disinfection applications. Color standards are yellow to green in color and cover a range of 0 to 20 mg/L monochloramine (as chlorine) (NH₂Cl-Cl₂ ).

Supplier: CHEMetrics

C-3801 Low Range Cyanide Comparator is a component of K-3810 Cyanide (free) CHEMets Visual Test Kit and is designed to be compared against the color formed in R-3810 Cyanide (free) CHEMets Refill. The comparator's range is applicable for many drinking water and surface water applications. Color standards are blue in color and cover a range of 0 to 0.10 ppm cyanide (CN-).

Supplier: CHEMetrics

This kit uses the EGTA chemistry to measure the hardness of water by measuring the dissolved calcium in the water.

Supplier: CHEMetrics

C-7512 Dissolved Oxygen Comparator is a component of K-7512 Dissolved Oxygen CHEMets Visual Test Kit and is designed to be compared against the color formed in R-7512 Dissolved Oxygen CHEMets Refill. The comparator's range is applicable to many industrial applications. Color standards are blue in color and cover a range of 1 to 12 mg/L Oxygen.

Supplier: CHEMetrics

Range: 0 to 0.20 ppm, MDL: 0.04 ppm, Method: DDPD (free and total), CHEMetrics Free and Total Chlorine test kit comes in a cardboard box and contains everything needed to perform 30 tests: Refill, Comparator, Activator Solution, 25 ml sample cup, instructions and MSDS.

Supplier: CHEMetrics

This product is a refill for K-6720 molybdate CHEMets visual kit for the analysis of molybdate in water. It contains 30 self-filling CHEMets ampoules packaged securely in cardboard trays and box. R-6720 molybdate CHEMets refill is compatible with C-6720 molybdate comparator.

Supplier: CHEMetrics

CHEMets® Formaldehyde Visual Test Kit

Supplier: CHEMetrics

Test kits employ the PDMAB, paradimethylaminobenzaldehyde chemistry. PDMAB in acid solution reacts with hydrazine to form a yellow product.

Supplier: CHEMetrics

Ideal for testing detergents (anionic surfactants, MBAS method) in water.

Supplier: CHEMetrics

Titrets® test kits use reverse titration to quantify concentrations in aqueous samples

Supplier: CHEMetrics

Ideal for low- to medium-range colorimetric analysis of water quality

Supplier: CHEMetrics

CHEMets® Ammonia Visual HR Test Kit (Nessler 1000 to 10000 ppm)

Supplier: CHEMetrics

An instrumental test kit for the colorimetric analysis of silica in water. This test kit utilizes Vacu-vials® self-filling ampoules.

Supplier: CHEMetrics

The CHEMets® visual colorimetric test kit turns a red-violet color in direct proportion to the hexavalent chromium concentration. Measurements are made against a color comparator. Results are expressed as ppm (mg/L) CrO4.

Supplier: CHEMetrics

This product is a refill for K-2511 chlorine (free and total) ULR CHEMets visual kit for the analysis of chlorine in water. It contains 30 self-filling ULR CHEMets ampoules packaged securely in cardboard trays and box. R-2511 chlorine (free and total) - ULR CHEMets refill is compatible with C-2511 chlorine comparator.