277 Results for: "CHEMetrics"

Supplier: CHEMetrics

CHEMets® molybdate Visual Test Kit 2 to 24 ppm

Supplier: CHEMetrics

The A-6802 accessory pack supplies enough of each solution to perform approximately 120 tests. Quantity per pack: Three 10 ml bottles of A-6804 Stabilizer Solution and three 10 ml bottles of A-6805 Catalyzer Solution.

Supplier: CHEMetrics

Monochloramine Instrumental Test

Supplier: CHEMetrics

This test uses the DPD testing method and will turn pink in color. It is most often used to measure for accurate dosing of Bromine in water as a disinfectant, but can be used in any applications where low concentrations of bromine in water need to be measured.

Supplier: CHEMetrics

C-2801 Low Range Chromate Comparator is a component of K-2810 Chromate (hexavalent) CHEMets Visual Test Kit and is designed to be compared against the color formed in R-2810 Chromate CHEMets Refill. The comparator's range is applicable for many industrial wastewater applications. Color standards are pink in color and cover a range of 0 to 1.0 ppm CrO₄.

Supplier: CHEMetrics

The Chromate Acidifier Solution A-2700 accessory pack supplies enough solution to perform at least 200 tests. Qty. per Pack: six 10 ml bottles.

Supplier: CHEMetrics

This ammonia test uses the hydroxybenzyl alcohol method of analysis.K-1420 is a perfect fit for environmental, wastewater, stormwater, aquaculture, or any application where a range of ammonia concentrations may be measured and rapid results required. This kit can be used to determine free ammonia concentration in the presence of monochloramine.

Supplier: CHEMetrics

The C-1002 Round Filming Amine Comparator is a component of K-1006 Filming Amine CHEMets® Test Kit (Rose Bengal) and is designed to be compared against the color formed in R-1006 Filming Amines CHEMets® Refill (Methyl Orange) ampoules. The kit's range is applicable for routine measurement of residual filming amines in boiler feedwater. The comparator contains a set of color standards (sealed ampoules) containing dye mixtures that are formulated to match the colors produced by the test ampoules. The color standards are pink in color and cover a range of 0 to 1 ppm octadecylamine (ODA). Range: 2 to 6 ppm as ODA or OLA. Increments: 2.0, 3.0, 4.0, 5.0, 6.0 ppm ODA or OLA.

Supplier: CHEMetrics

C-2810 High Range Chromate Comparator is a component of K-2810 Chromate (hexavalent) CHEMets Visual Test Kit and is designed to be compared against the color formed in R-2810 Chromate CHEMets Refill. The comparator's range is applicable for many industrial wastewater applications. Color standards are pink in color and cover a range of 0 to 10 ppm CrO₄.

Supplier: CHEMetrics

The accessory pack supplies enough solution to perform at least 100 tests. Qty. per pack: Six 20 ml bottles.

Supplier: CHEMetrics

This product is a refill for K-6701 molybdate CHEMets visual kit and K-6702 molybdate CHEMets visual kit for the analysis of molybdate in water.It contains 30 self-filling CHEMets ampoules packaged securely in cardboard trays and box. R-6702 molybdate CHEMets refill is compatible with C-6701 molybdate Comparator and C-6702 molybdate Comparator.

Supplier: CHEMetrics

C-1605 Flat Bromine Comparator is a component of K-1605 Bromine CHEMets® Test Kit and is designed to be compared against the color formed in R-7904 Bromine/PAA/Peroxide CHEMets® Refill. The comparator's range is applicable for many disinfection applications where bromine is used. Color standards are pink in color and cover a range of 0 to 11 ppm Bromine (Br₂). Store in the dark at room temperature. Increments: 0, 2.2, 3.4, 4.5, 5.6, 6.8, 7.9, 9, 11 ppm Br₂.

Supplier: CHEMetrics

Test method: The Peracetic Acid CHEMets® test kit (0 to 1 and 0 to 5 ppm) employs the DPD chemistry. The sample is treated with an excess of potassium iodide. Peracetic acid oxidizes the iodide to iodine. The iodine then oxidizes DPD (N,N-diethyl-p-phenylenediamine) to form a pink colored species in direct proportion to the peracetic acid concentration. Various oxidizing agents such as halogens, ferric ions and cupric ions will produce high test results. Hydrogen peroxide does not interfere with this test if present at levels comparable to the peracetic acid levels.

Supplier: CHEMetrics

DEHA Instrumental Test 0 to 2 ppm

Supplier: CHEMetrics

CHEMets® Sulfide HR Visual Test Kit (1000 to 10,000 ppm)

Supplier: CHEMetrics

C-3810 High Range Cyanide Comparator is a component of K-3810 Cyanide (free) CHEMets Visual Test Kit and is designed to be compared against the color formed in R-3810 Cyanide (free) CHEMets Refill. The comparator's range is applicable for many drinking water and surface water applications. Color standards are blue in color and cover a range of 0 to 1.0 ppm cyanide (CN-).

Supplier: CHEMetrics

The C-1404 Flat Ammonia Comparator (HBA) is a component of the K-1420 Ammonia CHEMets® Test Kit (HBA) and is designed to be compared against the color formed in R-1402 Ammonia/Monochloramine CHEMets® Refill (HBA) ampoules. The kit's range is applicable for many environmental, stormwater, wastewater and aquaculture applications. The C-1404 comparator contains a set of color standards (sealed ampoules) containing dye mixtures that are formulated to match the colors produced by the test ampoules. Color standards are yellow to green in color and cover a range of 0 to 4 ppm ammonia-nitrogen (NH₃-N) and 0 to 80 ppm NH₃-N. Range: 0 to 4.0, 0 to 80, 0 to 2000, 0 to 10,000 ppm.

Supplier: CHEMetrics

The A-7004 accessory pack supplies enough Nitrite Acidifier Solution to perform approximately 200 tests. Quantity per pack: Six 10 ml Bottles.

Supplier: CHEMetrics

A-1410 is designed to be a refill of the accessory solutions found in the K-1420 Ammonia CHEMets®; Test Kit (HBA). It contains: Two 10 ml bottles of A-1404 Stabilizer Solution, two 10 ml bottles of A-1405 Catalyzer Solution, and two 10 ml bottles of A-1406 Activator Solution. This is enough of each solution to perform approximately 80 tests.

Supplier: CHEMetrics

Comparators, Dissolved Oxygen for CHEMets® Test Kits, Chemetrics

Supplier: CHEMetrics

Comparators for CHEMets® Test Kits

Supplier: CHEMetrics

Dissolved Oxygen in water test kits for environmental and drinking water applications (ppm range) employ the indigo carmine method. The reduced form of indigo carmine reacts with D.O. to form a blue product. The indigo carmine methodology is not subject to interferences from temperature, salinity, or dissolved gases such as sulfide, which plague users of D.O. meters.

Supplier: CHEMetrics

Phosphate Instrumental Test Kit

Supplier: CHEMetrics

Filming amines are fed continuously into boiler feedwater to protect metal surfaces from corrosion caused by dissolved oxygen and carbon dioxide in condensate water. The amine forms a thin film on the surfaces that repels the potentially corrosive water.

Supplier: CHEMetrics

The R-9423 refill contains 20 double-point ampoules, 21 test tubes, dropper bottle with cap, tip-breaking tool, and instructions.

Supplier: CHEMetrics

Ideal for low- to medium-range colorimetric analysis of water quality

Supplier: CHEMetrics

The Titrets® test uses a ceric sulfate titrant with ferroin indicator. Depending on the procedure used, this kit can determine H2O2 concentrations from 0.01% to as high as 20%.

Supplier: CHEMetrics

The Vacu-vials® instrumental test kits employ the DPD chemistry and are accepted by the USEPA for wastewater and drinking water analysis.

Supplier: CHEMetrics

Accessories for CHEMetrics Test Kits

Supplier: CHEMetrics

This product is a refill for K-3810 Cyanide (free) CHEMets visual kit for the analysis of cyanide in water. It contains 30 self-filling CHEMets ampoules packaged securely in cardboard trays and box. R-3810 Cyanide CHEMets refill is compatible with C-3801 low range cyanide comparator and C-3810 high range copper comparator.