Delta T® Micro-Perfusion Pumps, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
These single-channel, smooth, analog motor-driven peristaltic pumps are designed specifically for microscopy applications requiring a variety of flow rates
Expand 3 Items
Objective Thermal Spacers, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
These 9 mm thick internally and externally threaded polymer rings are to be placed between an objective and nosepiece to inhibit thermal conductivity.
Expand 3 Items
FCS3® Stage Adapters, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
FCS3® Stage Adapters consist of a black anodized aluminum plate containing a circuit board and electrical connectors that accept the FCS3® and interface a variety of upright microscope stages.
Expand 3 Items
Objective Heater® System, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
A small, cube-shaped device containing a heating band, fastening loop, and thermal sensor that is designed to attach to a microscope objective to prevent heat loss from the specimen when using high numeric aperture lenses.
Expand 5 Items
Blank Gaskets, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
These flat, 40 mm diameter silicone sheets are available in varied thicknesses, and can be modified by the user to suit specific protocols.
Expand 4 Items
FCS3® Non-Heating Chamber Set, Bioptechs®
Supplier: BIOPTECHS INC.
Compatible, microscopic flow cell with a user definable specimen area for upright microscopes.
Expand 1 Items
Objective Wrench and Plier Set, Bioptechs
Supplier: BIOPTECHS INC.
This tool set used to isolate the mechanical stress applied to an objective when removing the decorative collar.
Expand 1 Items
Oasis® Heating and Cooling System, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
The Oasis® Heating and Cooling System is a Peltier-driven heating and cooling system that circulates temperature-regulated fluid through accessory devices used on a microscope.
Expand 1 Items
CFCS2® Cooled Closed Chamber System, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
This modified FCS2® Closed Chamber System includes fluid ports in the base to accommodate the circulation of an external refrigerant.
Expand 1 Items
FCS2® Micro-Perfusion Pumps, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
These single-channel, smooth, analog motor-driven peristaltic pumps are designed specifically for microscopy applications requiring a variety of flow rates.
Expand 3 Items
FCS2® Cooling Adapter, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
The FCS2® Cooling Adapter is an O-Ring sealed window that circulates an isolated cooled fluid over the upper glass element (Microaqueduct slide) to cool the specimen to desired temperature
Expand 1 Items
FCS2®/FCS3® 30-Piece Gasket Set, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
A 30-piece assortment of round gaskets, featuring 14×22 mm and 30 mm round internal cutouts plus blanks of each thickness.
Expand 1 Items
FCS2® Single Tubing Sets, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
FCS2® Single Tubing Sets include a package of four single C-Flex or Silicone tubings with molded ends to fit the Micro-Perfusion Pump
Expand 5 Items
Stable 'Z'® Stage Adapters, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
The Stable "Z"® Nikon Stage Adapter is a 108 mm round glass plate with an electronically heated metal plate in its center to fit a Nikon microscope stage where biological specimens are placed for observation.
Expand 4 Items
Round Gasket with Rectangular Hole, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
A round silicone gasket featuring a rectangular 30 mm I.D.
Expand 1 Items
Microaqueduct Slides, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
A 40mm diameter, 1mm thick glass circle with an ITO coating on the outer surface
Expand 1 Items
FCS2® Temperature Controller, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
The FCS2® Temperature Controller is an electronic controller used with the FCS2® chamber to maintain uniform temperature, from ambient to 50 °C.
Expand 1 Items
FCS2® Low Dead Volume Top Adapter, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
The white, top portion of a FCS2® that is equipped with 0.5 mm I.D
Expand 1 Items
ICD Heated Lid, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
This O-Ring sealed, stainless steel insert is equipped with a heated glass window to prevent condensation and atmospherically seal an ICD.
Expand 1 Items
Objective Thermal Isolators, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
These 9 mm thick internally and externally threaded polymer rings are to be placed between an objective and nosepiece to inhibit thermal conductivity.
Expand 3 Items
Delta T® Heated Culture Dishes, 0.5 or 0.17 mm Coverglass, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
Delta T® Heated Culture Dishes are designed to simulate host conditions on the microscope stage, and provide an optimal optical environment for microscopy
Expand 4 Items
Delta T® Culture Dish System, Starter Set, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
The Delta T® System is a comprehensive environmental control system for observing cell culture on a microscope. The system is ideal for multi-user facilities, and allows plating, incubation, and observation without the need to transfer cells.
Expand 1 Items
¹/₁₆" Perfusion Pump Tubing Adapter Set, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
A kit of 1/16" tubing barbs and connectors that enable fluid connection to FCS2® or FCS3® chambers
Expand 1 Items
Objective Cooling Collar, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
Ring-shaped attachment to an objective provides an isolated pathway through which a refrigerated fluid can flow, to provide an efficient means of cooling the objective.
Expand 1 Items
Stage Spacer Kit, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
This stage spacer kit is designed to raise the height of an inverted microscope stage.
Expand 1 Items
EDU Culture Dish Control System, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
The EDU Culture Dish Control System is a simplified version of the Delta T® system
Expand 3 Items
Accessories for Delta T® Culture Dish System, Bioptechs
Supplier: BIOPTECHS INC.
Culture dish
Expand 24 Items
Interchangeable Coverslip Dish Sets, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
The Interchangeable Coverslip Dish Sets are autoclavable and reusable culture dishes
Expand 2 Items
FCS3® Spanner Wrench, Bioptechs
Supplier: BIOPTECHS INC.
A knurled aluminum disk featuring pins inserted to interface the FCS3® chamber
Expand 1 Items
Micro-Perfusion Pump Mounting Rod Clamp, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
A polymer screw-on clamping bracket to support the Bioptechs Micro-Perfusion Pump onto conventional 1.27cm (0.5") breadboard support post.