92 Results for: "ADVANCED BIOMATRIX, INC. MS"

Supplier: ADVANCED BIOMATRIX, INC. MS

E-Cadherin has been used as coating matrix protein for 1) maintaining long-term ES or iPS cell culture then combine with proper ES cell culture media, 2) as a coating matrix material for 11R tag recombinant TF intracellular delivery for protein derived iPS protocol with extremely low-level non-specific interaction and 3) as a native antigen for antibody production.

Supplier: ADVANCED BIOMATRIX, INC. MS

Ruthenium Visible Light Photoinitiator (400-450nm)

Supplier: ADVANCED BIOMATRIX, INC. MS

PhotoCol®-IRG is a methacrylated Type I collagen kit. These 3D collagen gels can be prepared at various concentrations and photocrosslinked (365nm) to provide various gel stiffness. Each kit contains 100 mg of methacrylated collagen, irgacure photoinitiator, acetic acid and a neutralization solution.

Supplier: ADVANCED BIOMATRIX, INC. MS

Tropoelastin is the precursor to the elastin molecule. Elastin is found in many tissues of the body including the skin, arterial walls and ligaments. Elastin confers strength and elasticity to tissues and organs.

Tropoelastin is not normally available in its native state since it becomes cross-linked immediately after its synthesis by the cell, during its export into the extracellular matrix.

This tropoelastin is produced using recombinant production methods. The product is supplied as a sterile, lyophilized powder containing 1 mg per vial. A Certificate of Analysis is available with the purchase of each product.

Tropoelastin is typically used as a thin coating on tissue culture surfaces. Specific instructions are found in the Directions for Use. This product is generally used in vitro as a substrate scaffold to enhance cell attachment, adherence and proliferation.

Supplier: ADVANCED BIOMATRIX, INC. MS

HyStem® Hydrogel Kit - The growth factor delivery matrix

Supplier: ADVANCED BIOMATRIX, INC. MS

TeloCol®-3 bovine collagen solution is derived from an acid extraction process yielding a telopeptide-intact collagen. The pro-peptide regions at both ends of the collagen chain, N- and C-telopeptide regions, are maintained.

TeloCol®-3 collagen is approximately 95% Type I collagen with the remainder being comprised of Type III collagen. Each product includes a bottle containing 50 ml of collagen solution accompanied with a bottle of pre-formulated neutralizing solution for the formation of a collagen gel. This product is supplied at a concentration of approximately 3 mg/ml with the concentration for each specific lot provided on the product label and Certificate of Analysis that is available with the purchase of each product. TeloCol®-3 is sterile filtered and provided in user-friendly packaging for use and storage.

TeloCol®-3 is ideal for coating of surfaces, providing preparation of thin layers for culturing cells, or use as a solid gel.

Supplier: ADVANCED BIOMATRIX, INC. MS

CHP can specifically bind to denatured collagen.

Supplier: ADVANCED BIOMATRIX, INC. MS

Methacrylated Hyaluronic Acid (HA Only)

Supplier: ADVANCED BIOMATRIX, INC. MS

CHP can specifically bind to denatured collagen.

Supplier: ADVANCED BIOMATRIX, INC. MS

PhotoGel®-IRG is a methacrylated gelatin kit. These 3D gelatin hydrogels can be prepared at various concentrations and photocrosslinked (365nm) to provide various gel stiffness. Each kit contains 1 gram (2 x 500 mg) of methacrylated gelatin and irgacure photoinitiator.

Supplier: ADVANCED BIOMATRIX, INC. MS

Sterile filtered, degassed, deionized water at pH 5.0-8.0. This product was designed and intended for use with the HyStem® family of thiolated hyaluronic acid products. 

Supplier: ADVANCED BIOMATRIX, INC. MS

CytoSoft® Imaging products provide a tool to culture cells on PDMS substrates with various rigidity including 0.2, 0.5, 2, 8, 16, 32, and 64 kPa. This CytoSoft® Imaging plate comes with 1 glass-bottom 96-well plate for high resolution imaging of cells on the selected stiffness.

Supplier: ADVANCED BIOMATRIX, INC. MS

PhotoCol®-RUT is a methacrylated Type I collagen kit. These 3D collagen gels can be prepared at various concentrations and photocrosslinked (400-450nm) to provide various gel stiffness. Each kit contains 100mg of methacrylated collagen, ruthenium photoinitiator, acetic acid and a neutralization solution.

Supplier: ADVANCED BIOMATRIX, INC. MS

Poly-D-Lysine is a synthetic amino acid chain that is positively charged and widely used as a coating to enhance cell attachment and adhesion to both plasticware and glass surfaces. This molecule is resistant to enzymatic degradation and has been used to culture a wide variety of cell types.
The molecular weight of Poly-D-Lysine can vary significantly with lower molecular weight (30,000 Da) being less viscous and higher molecular weight (>300,000 Da) having more binding sites per molecule. This product’s molecular weight ranges from 70,000 to 150,000 Da yielding a solution viscosity for easy handling while providing sufficient binding sites for cell attachment.

Poly-D-Lysine surface coatings are designed to improve cell attachment, growth and differentiation of many cell types. Coated surfaces will often improve cell attachment in reduced or serum-free conditions. Poly-D-Lysine is supplied in a sterile 5 mg package size.

Supplier: ADVANCED BIOMATRIX, INC. MS

Type IV Collagen is the primary collagen found in the extracellular basement membranes separating a variety of epithelial and endothelial cells. It is a major component of the dermal-epidermal junction where it is mostly found in the lamina densa. It is a heterotrimeric molecule containing two Alpha 1-like and one Alpha 2-like chains.

This Type IV Collagen is isolated from human placenta and is purified using a multi-step process. The product is supplied as a non-sterile powder containing 5 mg of Type IV collagen per vial. A Certificate of Analysis is available with the purchase of each product.

Type IV Collagen is typically used as a thin coating on tissue culture surfaces. Specific instructions are found in the Directions for Use. This product is generally used in vitro as a substrate scaffold to enhance cell attachment, adherence and proliferation. Type IV collagen may be used to culture epithelial, endothelial, muscle, nerve and many other cell types. Additionally, this product is suitable for use as a substrate for collagenase assays and positive controls.

Supplier: ADVANCED BIOMATRIX, INC. MS

Advanced BioMatrix products are recognized for purity, functionality, quality, and lot-to-lot consistency, allowing for reproducibility in research.

Supplier: ADVANCED BIOMATRIX, INC. MS

Advanced BioMatrix products are recognized for purity, functionality, quality, and lot-to-lot consistency, allowing for reproducibility in your research.

Supplier: ADVANCED BIOMATRIX, INC. MS

Advanced BioMatrix products are recognized for purity, functionality, quality, and lot-to-lot consistency, allowing for reproducibility in research.

Supplier: ADVANCED BIOMATRIX, INC. MS

HyStem®-C Hydrogel Kits - The starter matrix.

Supplier: ADVANCED BIOMATRIX, INC. MS

NaOH is provided in a user-friendly packaging for use and storage. This product is sterile and supplied as a ready to use solution.

Supplier: ADVANCED BIOMATRIX, INC. MS

Vitronectin is a monomeric glycoprotein used to promote cell attachment, migration, proliferation and differentiation in a broad number of cell lines and types. This product has been purified from human plasma where it is found as a mixture of 75kDa and 65kDa polypeptides.

Vitronectin’s primary use in cell culture is related to cell adhesion. It also binds to heparin and collagen.

Vitronectin is ideal for coating of surfaces. The optimal concentration for cell attachment and culture may differ for various cell types. Vitronectin has been used at a final coating concentration as low as 50 ng/cm2 on plasticware. It is provided in user-friendly packaging for use and storage. Vitronectin is sterile filtered and is supplied as a ready to use solution after thawing and concentration adjustment. This product is shipped separately on dry ice.

Supplier: ADVANCED BIOMATRIX, INC. MS

Type IV Collagen is the primary collagen found in the extracellular basement membranes separating a variety of epithelial and endothelial cells. It is a major component of the dermal-epidermal junction where it is mostly found in the lamina densa. It is a heterotrimeric molecule containing two Alpha 1-like and one Alpha 2-like chains.

This Type IV Collagen is isolated from human placenta and is purified using a multi-step process. The product is supplied as a sterile, lyophilized powder containing 5 mg of Type IV collagen per vial. A Certificate of Analysis is available with the purchase of each product.

Type IV Collagen is typically used as a thin coating on tissue culture surfaces. Specific instructions are found in the Directions for Use. This product is generally used in vitro as a substrate scaffold to enhance cell attachment, adherence and proliferation. Type IV collagen may be used to culture epithelial, endothelial, muscle, nerve and many other cell types. Additionally, this product is suitable for use as a substrate for collagenase assays and positive controls.

Supplier: ADVANCED BIOMATRIX, INC. MS

Advanced BioMatrix offers PhotoCol®, a purified methacrylated Type I bovine collagen kit. PhotoCol® provides native-like 3D collagen gels with the unique attributes to be prepared at various concentrations and crosslinked to provide various gel stiffness.

The PhotoCol® kit consists of purified methacrylated Type I bovine collagen as the core component with other support reagents in the kit.

The methacrylated Type I collagen is produced from telo-peptide intact bovine collagen where the collagen has been modified by reacting the free amines, primarily the e-amines groups of the lysine residues as well as the a-amines groups on the N-termini. Approximately 40% of the total lysine residues of the collagen molecule have been methacrylated. The collagen is extracted from bovine hide and contains a high monomer content. The collagen starting material was isolated from a closed herd and purified using controlled manufacturing processes. A bottle of 20 mM acetic acid solution is provided to solubilize the lyophilized methacrylated collagen at concentrations ranging from 3 to 8 mg/ml.The neutralization solution consists of an alkaline 10X phosphate buffered saline (PBS) solution which provides physiological salts and pH in the final mixture.The photoinitiator consists of Irgacure 2959 to be formulated in methanol (methanol not included) which allows UV crosslinking of the collagen at 365 nm.

Supplier: ADVANCED BIOMATRIX, INC. MS

Use With Type I Collagen to help form 3D hydrogels.

Supplier: ADVANCED BIOMATRIX, INC. MS

PhotoGel®-LAP is a methacrylated gelatin kit. These 3D gelatin hydrogels can be prepared at various concentrations and photocrosslinked (405nm) to provide various gel stiffness. Each kit contains 1 gram (2 x 500 mg) of methacrylated gelatin and LAP photoinitiator.

Supplier: ADVANCED BIOMATRIX, INC. MS

Advanced BioMatrix VitroCol® collagen is the first widely available, naturally produced purified human collagen for research purposes. VitroCol® sets the standard for purity (>99% collagen content), functionality and represents the only native-like human collagen offered.

VitroCol® collagen is naturally secreted from human neo-natal fibroblast cells. The human fibroblasts are cultured in optimal conditions allowing the fibroblast to naturally and efficiently secret extracellular matrix. The extracellular matrix is then processed and purified to yield the naturally produced human collagen.

VitroCol® is approximately 97% Type I human collagen with the remainder being comprised of Type III collagen. It contains a high monomer content as measured by gel permeation chromatography.

VitroCol® is supplied at approximately 3 mg/ml concentration. The concentration for each specific lot is provided on a Certificate of Analysis that is available with the purchase of each product. VitroCol® is soluble atelo-collagen in 0.01 N HCI, therefore, the pH is approximately 2.0.

VitroCol® is especially ideal for human cell culture systems when coating of surfaces, providing preparations of thin layers of culturing cells, or use as a solid gel. VitroCol® human collagen is provided in user-friendly packaging for use and storage. VitroCol® is sterile filtered and is supplied as a ready to use solution.

Supplier: ADVANCED BIOMATRIX, INC. MS

Extralink-Lite PEGDA is a thiol-reactive crosslinker designed for use in HyStem kits.

Supplier: ADVANCED BIOMATRIX, INC. MS

Gelin-S is a thiol-modified gelatin that comes as a lyophilized powder. Gelin-S is a component of the HyStem®-C and HyStem®-HP kits, but can be purchased separately here.

Supplier: ADVANCED BIOMATRIX, INC. MS

Advanced BioMatrix products are recognized for purity, functionality, quality, and lot-to-lot consistency, allowing for reproducibility in research.

Supplier: ADVANCED BIOMATRIX, INC. MS

Advanced BioMatrix products are recognized for purity, functionality, quality and lot-to-lot consistency, allowing for reproducibility in research.