4751 Results for: "5-Bromonicotinonitrile&view=list"

Supplier: ACCUFORM MANUFACTURING, INC

Safety Posters communicate the importance of safety procedures and practices throughout the workplace.

Supplier: Chemglass

The round bottom, heavy wall, five-neck flask feature a standard taper.

Supplier: Waring Products

Versatile two-speed blenders (18,000 and 22,000rpm) for general laboratory work.

Supplier: Chemglass

Squibb style separatory funnels feature a glass stopcock.

Supplier: Chemglass

Squibb funnels feature a PTFE stopcock.

Supplier: Thermo Fisher Scientific

Thermo Scientific™ Savant™ SpeedVac™ SPD300DDA vacuum concentrator is a large-capacity vacuum concentrator with a modular design.

Supplier: Chemglass

The offset of the adapters is measured from center to center.

Supplier: Desco

Adjustable heel foot grounder with non-marring interior layer.

Supplier: SPEX CERTIPREP LLC

Ready-to-use whole volume standard for gravimetric analysis

Supplier: Eagle Manufacturing

For carrying and dispensing flammable liquids safely.

Supplier: Anaspec Inc

This is a 5-FAM-labeled Bid BH3 peptide. Bid is a pro-apoptotic member of the 'BH3-only' subset of the BCL-2 family proteins that constitute a critical control point in apoptosis. Bid interconnects extrinsic pathway TNFR1 and Fas death signals to the mitochondrial amplification of the intrinsic pathway. The references listed below belong to the unlabeled Bid BH3.
Sequence:5-FAM-EDIIRNIARHLAQVGDSMDR
MW:2667.9 Da
% peak area by HPLC:95
Storage condition:-20° C

Supplier: DWK Life Sciences (KIMBLE)

Grinders are ideal for resuspending protein and DNA pellets or grinding soft tissues

Supplier: SPEX CERTIPREP LLC

CLP Standards for ICP & ICP-MS
Our Contract Laboratory Program (CLP) standards allow you to Calibrate with Confidence®. The standards are to be used in conjunction with the Statement of Work for Inorganic Analysis; Multi-Media/Multi-Concentration Document Number ILM 05.3/ISM 01.2.

The final ICP check, performed in our own laboratories, is your stamp of assurance. We calibrate our instruments with traceable reference materials and show you the actual found value of the solution you receive, not just an ideal, calculated number as so many other standards manufacturers do. The combination of elements, concentrations and matrices listed have been diagnosed by SPEX CertiPrep for convenience of use and stability.

US EPA SOW ILM 05.3/ISM 01.2 gives specific procedures for the methods of analysis, target elements, and concentrationlevels. Standards are specified not only by the elements present and their relative concentrations, but also the order and frequency of running standards, blanks and samples. Details of these specifications may be found in the US EPA SOW ILM 05.3/ISM 01.2 in the following sections:

• Exhibit C, Inorganic Target Analyte List (TAL)
• Exhibit D, Analytical Methods
• Exhibit E, QA/QC Requirements

Initial Calibration Verification for CLP Methods
The US EPA retains analytical services through the Contract Laboratory Program (CLP). The CLP follows detailed SOPs derived from EPA methods. The CLP methods require calibration of analytical instrumentation whithin the expected quantitative range (ICAL standards) and additional CLP QA standards (ICV standards) to verify the calibration curve at each of the selected wavelengths that wil be used for sample analysis.

Our verification standards contain all of the elements on the TAL list and are independent standards for testing an instruments calibration curve. SPEX CertiPrep's ICV standards are designed to be used with their corresponding instrument calibration standards (ICAL).

We recommend dilution of ICV standards to a range within your instruments calibration curve. A dilution of 20-fold is recommended.

Supplier: Chemglass

Open top SVL® caps with aperture with sealing rings.

Supplier: ZING Enterprises

Alerts drivers to take precautionary measures and ensure public safety.

Supplier: DWK Life Sciences (KIMBLE)

KONTES® Squibb separatory funnels with PTFE stopcock and standard taper joint

Supplier: Chemglass

Adapters are used for reduced pressure filtration with plain stem buchner funnels.

Supplier: DWK Life Sciences (KIMBLE)

The WHEATON 16-40 Slide Unit Staining Dish system is offered as a mix and match component system, offering greater flexibility in meeting yoru requirements

Supplier: Chemglass

These round-bottom flasks feature heavy wall construction, short necks, and [ST] outer joints.

Supplier: DWK Life Sciences (KIMBLE)

Designed for small-scale, benchtop mixing and agitation

Supplier: Chemglass

Adapters are available in two bottom configuations and four top configurations.

Supplier: Chemglass

Unique adapter is made entirely of PTFE and is supplied complete with a series of five PTFE ferrule-style cones.

Supplier: Chemglass

Unions are made from 316 stainless steel.

Supplier: Restek

For analysis of pesticides, PCBs, amines, nitrogen-containing herbicides.

Supplier: SPEX CERTIPREP LLC

CLP Standards for ICP & ICP-MS
Our Contract Laboratory Program (CLP) standards allow you to Calibrate with Confidence®. The standards are to be used in conjunction with the Statement of Work for Inorganic Analysis; Multi-Media/Multi-Concentration Document Number ILM 05.3/ISM 01.2.

The final ICP check, performed in our own laboratories, is your stamp of assurance. We calibrate our instruments with traceable reference materials and show you the actual found value of the solution you receive, not just an ideal, calculated number as so many other standards manufacturers do. The combination of elements, concentrations and matrices listed have been diagnosed by SPEX CertiPrep for convenience of use and stability.

US EPA SOW ILM 05.3/ISM 01.2 gives specific procedures for the methods of analysis, target elements, and concentrationlevels. Standards are specified not only by the elements present and their relative concentrations, but also the order and frequency of running standards, blanks and samples. Details of these specifications may be found in the US EPA SOW ILM 05.3/ISM 01.2 in the following sections:

• Exhibit C, Inorganic Target Analyte List (TAL)
• Exhibit D, Analytical Methods
• Exhibit E, QA/QC Requirements

CLP ISM 01.2 Standards for ICP-MS
Our spike standard, CL-SPIKE-4, provides all of the analytes required for the ICP-MS and the AA spike. Add 1 ml of CL-SPIKE-4 to aqueous samples and 2 ml of CL-SPIKE-4 to solid samples prior to digestion.

CLP ILM 05.3 Standards for ICP-MS
Our spike standard, CL-SPIKE-4, provides all of the analytes required for the ICP-MS.

Supplier: Justrite

Safely contain hazardous liquids and control vapors to reduce the risk of fire, protecting both personnel and facilities.

Supplier: Biotium

CD16 (Clone 3G8) is a mouse monoclonal antibody that recognizes IgG receptor CD16, also known as FC gamma receptor III. This antibody belongs to the Biotium Choice list of select antibodies that have been validated and optimized in-house for optimal performance. The antibody is available conjugated to CF® Dyes and Astral™ tandem dyes. They are supplied in PBS, 0.1% BSA, 0.05% azide.

Supplier: Chemglass

Round bottom, heavy wall single short neck flask with a standard taper outer joint.

Supplier: Cooper Tools

Modular soldering irons utilize interchangeable handles, heaters, and tips for custom applications and maintenance.

Supplier: ZING Enterprises

The sign measures 18"H x 12" W, pre-drilled for easy mounting. Two grades of reflective sheeting are available.