You searched for: Fittings and Connectors
These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
Septum Nut for Shimadzu GCs, Restek
Supplier: Restek
Made of clear anodized aluminum and high-quality stainless steel. One-piece design for ease of installation and removal.
Expand 1 Items
Fixing Nut for Capillary Column for Split/Splitless Injector on Thermo Scientific TRACE, 8000, 8000 TOP & Focus SSL, Restek
Supplier: Restek
For use with split/splitless injectors on Thermo Scientific TRACE, 8000, 8000 TOP & Focus SSL.
Expand 1 Items
Male Pipe to Valco® Internal Adapter, Restek
Supplier: Restek
These adapters make a minimum-volume connection from a female pipe fitting on a pressure gauge or regulator to a Valco® zero-dead-volume fitting.
Expand 2 Items
EXP® Titanium Hybrid Replacement Ferrules (EXP® Reusable Fittings for HPLC and UHPLC for 10-32 fittings and ¹/₁₆" tubing), Restek
Supplier: Restek
Restek is pleased to offer the reusable EXP® fitting system from Optimize Technologies for the ultimate in easy, reliable LC connections.
Expand 2 Items
Capillary Column Caps, Restek
Supplier: Restek
Silicone or glass capillary column caps can be attached to the column in seconds to form an airtight seal.
Expand 2 Items
Sanitary Reactor Adapters, Lower Outlet, 1.5" Beaded Pipe, PTFE, Tri-Clamp, Chemglass
Supplier: Chemglass
Beaded pipe to sanitary fitting adapter connects to the 1.5" beaded pipe side arm of CG-1968-GL zero dead space drain valve.
Expand 1 Items
FCS2® Low Dead Volume Top Adapter, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
The white, top portion of a FCS2® that is equipped with 0.5 mm I.D
Expand 1 Items
EXP® Hand-Tight Coupler (EXP® Reusable Fittings for HPLC and UHPLC for 10-32 fittings and ¹/₁₆" tubing), Restek
Supplier: Restek
Restek is pleased to offer the reusable EXP® fitting system from Optimize Technologies for the ultimate in easy, reliable LC connections.
Expand 1 Items
Upchurch Scientific® Barbed-to-Thread Adapters, IDEX Health & Science
Supplier: Upchurch Scientific
The Upchurch Scientific® Barbed Adapters make it easy to connect flexible tubing to any standard 1/4-28 flat bottom or 10-32 coned receiving port.
Expand 3 Items
Fused Silica Y-Shaped Union, Ohio Valley
Supplier: Ohio Valley
Features linear tapers of a minimum angle, 1:1 split ratio, narrow angle between output legs for less column strain and low dead-volume
Expand 1 Items
Stable 'Z'® Stage Adapters, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
The Stable "Z"® Nikon Stage Adapter is a 108 mm round glass plate with an electronically heated metal plate in its center to fit a Nikon microscope stage where biological specimens are placed for observation.
Expand 4 Items
Sanitary Reactor Adapters, Lower Outlet, 1.5" Beaded Pipe, Stainless Steel, Tri-Clamp, Chemglass
Supplier: Chemglass
Beaded pipe to sanitary fitting adapter connects to the 1.5" beaded pipe side arm of CG-1968-GL zero dead space drain valve.
Expand 1 Items
Packed Column Inlet Adapter Kit for ¹/₄" Injection Ports, Restek
Supplier: Restek
Packed column inlet adapter kits center columns perfectly in injection ports to eliminate bent syringe needles.
Expand 2 Items
PTV Inlet Adapter Kit for Gerstel CIS 3 and CIS 4 PTV Inlets, Restek
Supplier: Restek
PTV inlet adapter kits are suitable for 0.25 mm and 0.32 mm ID columns.
Expand 1 Items
FCS2® Cooling Adapter, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
The FCS2® Cooling Adapter is an O-Ring sealed window that circulates an isolated cooled fluid over the upper glass element (Microaqueduct slide) to cool the specimen to desired temperature
Expand 1 Items
Nalgene® Replacement Coupling Inserts for Quick Filling Venting Closure; PP, Thermo Scientific
Supplier: Thermo Fisher Scientific
Nalgene Replacement coupling inserts support one handed connection and disconnection when applied to mating couple bodies
Expand 3 Items
QuickSplit Post-Column Flow Splitters, Restek
Supplier: Restek
Fluid resistor technology eliminates adjustments to capillary tubing for optimizing split ratio. Wide range of interchangeable resistors available.
Expand 10 Items
Valco® Adapter Ferrules, ¹/₁₆", Restek
Supplier: Restek
Fused silica adapter ferrules are made from Valcon polyimide, a unique, graphite-reinforced composite specially prepared to maximize mechanical stability at temperatures up to 350°C.
Expand 4 Items
HPLC Waste Line Adapters
Supplier: CP Lab Safety
ECO Funnels can be equipped with HPLC fittings, allowing the operator to connect HPLC waste lines directly to the funnel. Installation is free of charge. To order HPLC attached to your ECO Funnel(s), please add the desired funnels and fittings to your cart. We can install up to 6 HPLC fittings per 4" funnel and 8 fittings per 8" funnel. Measure the Int.Ø of your tubing to determine the size of Luer Barb fitting that you need.
Expand 16 Items
Extended Capillary Column Nuts for Agilent 5890/6850/6890/7890 GCs, Restek
Supplier: Restek
Visible below inlet insulating cup for easy, breakage-free column installation without removing cup.
Expand 5 Items
IV Catheter Adapter, BD Medical
Supplier: BD
Multipurpose catheter adapter provide a threaded, female BD Luer-Lok™ connection to tubing and can be used for general catheterization techniques
Expand 1 Items
Micropacked Inlet Conversion Kits, Restek
Supplier: Restek
Use micropacked inlet conversion kits to convert capillary GC split/splitless inlets for use with 1/16" OD micropacked columns.
Expand 4 Items
GC Ferrules, Graphite, Trajan Scientific and Medical
Supplier: Trajan Scientific and Medical
Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. SGE brings technology and chromatography expertise to improve your chromatography. SGE manufactures an array of connection types for GC use. Poorly defined or selected connections can lead to an increase in dead volume, leaks from cycled temperatures and mismatched tubing sizes.
Expand 36 Items
OPTI-LOK™ Low Pressure Fittings
Supplier: Optimize
OPTI-LOK LP Fittings are an excellent choice for making low-pressure connections into ¹/₄-28 ports. Connections to flat-bottomed ports can be made using OPTI-LOK flat-bottomed ferrules for ¹/₁₆ or ¹/₈" tubing without the need for pre-flanged tubing ends. OPTI-LOK LP Fittings are precision machined to deliver leak-free, zero-dead-volume connections every time. We also offer ¹/₄-28 unions in various through-hole sizes for joining flat-bottom fittings.
Expand 24 Items
2-Port Vent Assembly, Straight, GL 45, Universal, 316L Electro Polished Stainless Steel, Chemglass
Supplier: Chemglass
Universal vent port assembly is constructed of 316 L electro polished stainless steel. These port assemblies fit all types of spinner flasks, media bottles and vessels. Configurations consist of a single vent tube, vent and short fill tubes, or angled vent and fill tubes. Supplied complete with a GL-32 or GL-45 open top cap and silicone gasket.
Expand 1 Items
EXP®2 Fitting Kits for Stainless Steel Tubing
Supplier: Optimize
Optimize is proud to introduce EXP2 - the next generation of EXP UHPLC fitting technology. Featuring a small ³/₁₆" hex-head EXP2 nut, the new EXP2 Driver and the original titanium hybrid ferrule, the EXP2 fittings offer hand-tight connections rated to 20000 psi+. The EXP2 nuts are available with 6-32, 6-40 and 10-32 threads and have been scaled down to allow for maximum working room in cramped spaces. The EXP2 Driver is a small, easy to use knurled torque driver which snaps on to the nuts for hand-tightening and loosening. The EXP2 Driver is slotted and can be removed from the nut and tubing after use.
Expand 6 Items
Serial Connector for µ-Slides, Ibidi
Supplier: IBIDI USA MS
Connector for two µ-Slides with female Luers in a serial manner.
Expand 1 Items
Packing Connectors for XK Columns, Cytiva
Supplier: Cytiva
Packaging connector XK 16 or XK 26 is used to connect another column, used as a packing reservoir, to a XK 16 or XK 26 column to achieve efficient packing.
Expand 1 Items
Packing Connectors, Cytiva
Supplier: Cytiva
Packing Tricorn columns is simplified using Tricorn packing connector and the appropriate glass tube.
Expand 2 Items
Plastic Connectors 25 mm TC - Threaded, cytiva
Supplier: Cytiva
These connectors allow for connection from a 25 mm TriClamp (TC) connector to various threaded connectors.