You searched for: Cleanroom Wipes

Supplier: CONTEC, INC. MX

These PROSAT® sterile wipes are manufactured from hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade isopropanol and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general surface cleaning, PROSAT® Sterile Sigma™ wipes offer a soft and durable wipe providing consistent solvent application.

Supplier: Contec

Anticon 100® StandardWeight™ wipes are made from 100% continuous filament polyester with a double-knit, no-run interlock construction. The clean cut edges create a very soft wipe, where the whole of the wipe fabric can be used with no risk of scratching.

Supplier: Contec

MicroSilk™ II Wipes are made with fabric densely knitted by continuous microdenier filament.

Supplier: Contec

Anticon® Sterile Gold™ Wipes are a sterile version of Anticon® Gold HeavyWeight™ wipes. These wipes are made from 100% continuous filament polyester with a double-knit, no-run interlock construction. The proprietary sealed edges reduces the amount of fibres released from the wipe.

Supplier: Contec

SterileSorb™ Wipes are a hydroentangled blend of 55% cellulose and 45% polyester. They are highly sorbent with excellent durability and good cleanliness. SterileSorb™ wipes are strong and durable wet or dry, making them excellent for use in general cleaning and spill pick up.

Supplier: Contec

Amplitude™ Sigma™ Wipes are a hydroentangled blend of 55% cellulose and 45% polyester. They are highly sorbent, offering excellent durability and good cleanliness.

Supplier: Contec

Manufactured from meltblown polypropylene these PROSAT® presaturated wipes offer exceptional cleanliness. They are low in nonvolatile residues as well as particles and fibers. The use of presaturated wipes provides maximum process control.

Supplier: Contec

Polywipe Light Wipes are unlaundered standard weight interlock knit polyester wipes with knife-cut edges that can be used in less critical applications.

Supplier: CONTEC, INC. MX

SATWipes® SWNW0013 series wipes consist of a roll of (700) 7×9" saturated wipes which are dispensed through a center-pull container.

Supplier: Contec

Presaturated with IPA/DI water or 100% IPA.

Supplier: Contec

Amplitude™ Optic wipes are 100% nonwoven cellulose. The wipe consists of long staple fibers which are wet laid in a paper making process to form an extremely clean sheet. It features very low levels of extractables and only moderate particle generation. The wipe has a non-abrasive surface texture. The wipes are both absorbent and optical grade.

Supplier: Contec

The Polynit Z Wipes are constructed using conductive yarns within the polyester interlock knit that feature a unidirectional conductive pattern. These are very clean static dissipative wipes that is well suited for applications sensitive to electrostatic discharge.

Supplier: Contec

Polywipe-C Wipes are made from a standardweight 100% knitted polyester that is knife cut to create a soft edge.

Supplier: Contec

Quiltec® I Wipes offer the highest sorptive capacity of any sealed edge wipe available. They are manufactured using two layers of knitted polyester fabric that are laminated together to form a stronger, more adsorbent wipe. Additional fluid is captured within the quilted pockets between the fabric layers, increasing the sorbent capacity. Quiltec® I have more than twice the adsorbent capacity of a single-layer wipe.

Supplier: Contec

Polynit heatseal low endotoxin wipes are manufactured from high quality 100% knitted polyester fabric with sealed edges and produce low levels of particles and fibers. The polyester fabric offers the widest range of solvent compatibility. The wipes have a guaranteed endotoxin level of <1 EU/wipe and are validated sterile to 10⁻⁶ Sterility Assurance Level, making them ideal for use in product contact areas.

Supplier: Berkshire

Gamma Wipe® VP is an ultrasonically sealed-edge cleanroom laundered wiper recommended for ISO Class 3 and above environments composed of 100% continuous filament polyester knit fabric.

Supplier: ECOLAB LIFE SCIENCES

Klerwipe™ Low residue peroxide pouch wipes are ideal for routine or rotational use when cleaning and residue removal is required.

Supplier: Contec

Anticon® Gold HeavyWeight™ wipes are made from 100% continuous filament polyester with a double-knit, no-run interlock construction. They use patented textile technology to achieve superior sorption characteristics for critical applications.

Supplier: Contec

These sealed edge wipers with P.A.T.

Supplier: Contec

StatZorb® Wipes are made from polyester fabric with a conductive fiber knitted in a specially designed grid pattern that minimizes 'hot spots'. The antistatic properties are uniform on both sides of the wipe. The surface resistivity is 4.3×107. The static decay time is less than 1.5 seconds.

Supplier: Contec

Meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. PROSAT® presaturated wipes are exceptionally clean and also free from additives of any kind. This particular meltblown polypropylene contains very low levels of sodium and other ions.

Supplier: Contec

Anticon® Gold Sorb™ is a unique wipe which combines the performance of a microfiber yarn with that of a polyester yarn to create a wipe with superior wiping and sorptive characteristics.

Supplier: Contec

PROSAT® Polynit Heatseal Wipes are manufactured from 100% knitted textured polyester with laser-cut sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, and the addition of a periodic additional stitch of a no-run interlock knit prevents the fabric from unraveling. This creates an even more durable fabric with strong edges.

Supplier: Contec

Gowning room wipes are made using a strong cellulose/polyester non-woven fabric that is folded for easy pickup and very low in extractable residue.

Supplier: Kimberly-Clark

Low-linting wipers for ISO Class 4 (FED-STD-209E Class 10/M2.5) cleanroom assembly operations, pharmaceutical operations, and other clean environments.

Supplier: Contec

PROSAT® sterile polypropylene low endotoxin wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments.

Supplier: Contec

Hydrophilic polyurethane foam, high sorptive capacity with low levels of extractable residues and particles. For spill cleanup or solution/solvent application.

Supplier: ECOLAB LIFE SCIENCES

Klerwipe™ 70/30 IPA are sterile, knitted 100% polyester wipes impregnated with 0.2 micronfiltered IPA blended with deionized water.

Supplier: Contec

Amplitude™ Epsilon™ Wipes are made of a special grade blue cellulose and polyester hydroentangled to form a wipe with improved cleanliness and excellent sorbency.

Supplier: Contec

PROSAT® Sigma™ wipes consist of cellulose/polyester hydroentangled and saturated with a solution of 70% USP grade isopropanol and 30% deionized water. They are ideal for use in life science applications.