You searched for: Test/Sample Tube Closures

Supplier: SARSTEDT INC

High-quality, safe, and robust containers and caps are essential for mixing, processing, and storing samples. As one of the world’s largest manufacturers of tubes and storage containers, SARSTEDT offers the right product for every laboratory and analytical requirement.

Supplier: FIREFLYSCI, INC.

Caps are made of polypropylene and are equipped with a poly-vinyl liner.

Supplier: Watson Bio Lab

Coloured screw caps for use with test tubes.

Supplier: Globe Scientific

An effective method to recap blood drawing tubes, glass test tubes, and plastic culture tubes

Supplier: Simport Scientific

These PP screw caps are to be used with T500 series internal thread sample tubes.

Supplier: Caplugs

The MST™ flat top caps feature a flat head with a smooth surface.

Supplier: SARSTEDT INC

High-quality, safe, and robust containers and caps are essential for mixing, processing, and storing samples. As one of the world’s largest manufacturers of tubes and storage containers, SARSTEDT offers the right product for every laboratory and analytical requirement.

Supplier: SARSTEDT INC

High-quality, safe, and robust containers and caps are essential for mixing, processing, and storing samples. As one of the world’s largest manufacturers of tubes and storage containers, SARSTEDT offers the right product for every laboratory and analytical requirement.

Supplier: Chemglass

These 11mm Snap Caps™ can be snapped on and off by hand, eliminating the need for metal crimping and decapping tools, and reducing potential hazards due to sharp aluminum edges.

Supplier: Greiner Bio-One

Greiner Bio-One closures are made of high-grade polyethylene and are available in many colors.

Supplier: Spectrum Laboratories

Closures feature imbedded fluoropolymer resin-coated magnetic weights

Supplier: Globe Scientific

This dual position cap is produced from low density polyethylene (LDPE). It is ribbed for easy handling.

Supplier: Spectrum Laboratories

Pressure-fitted with an acid-washed, stainless steel bar into the reverse side

Supplier: Simport Scientific

Plug-type push-in polyethylene caps are designed for test tubes with an outside diameter of 12 mm. The 17 mm caps are designed for T408 centrifuge tubes.

Supplier: Spectrum Laboratories

Nylon closures lock gently over rigid membranes such as cellulose ester (CE) and polyvinylidene fluoride (type F) tubing, providing a strong, leakproof seal

Supplier: Restek

For use with split/splitless injectors on Thermo Scientific TRACE, 8000, 8000 TOP & Focus SSL.

Supplier: Simport Scientific

The screw cap incorporates a pierceable septum made of chemically resistant PTFE on the outside and silicone on the inside, both components being stable over a broad range of temperatures

Supplier: Chemglass

Standard Cap for FlowTubes

Supplier: Globe Scientific

These polyethylene plug caps are available in a selection of colors to facilitate sample identification.

Supplier: SARSTEDT INC

SARSTEDT offers sample transport systems and secondary containers for a wide variety of transport requirements.

Supplier: Dynalon

Cuvette caps, polyethylene dust covers fit most standard cuvettes.

Supplier: SARSTEDT INC

High-quality, safe, and robust containers and caps are essential for mixing, processing, and storing samples. As one of the world’s largest manufacturers of tubes and storage containers, SARSTEDT offers the right product for every laboratory and analytical requirement.

Supplier: SARSTEDT INC

High-quality, safe, and robust containers and caps are essential for mixing, processing, and storing samples. As one of the world’s largest manufacturers of tubes and storage containers, SARSTEDT offers the right product for every laboratory and analytical requirement.

Supplier: Simport Scientific

Dual position caps are suitable for use in both aerobic and anaerobic procedures.

Supplier: Chemglass

Thread Size: 15-425; Liner Type: Rubber. Cap for use with CG-190 G.P.I. screw thread tube. Part numbers CG-191-01 through CG-191-12 are made of black plastic with a choice of white rubber or fluoropolymer resin liner.

Supplier: Simport Scientific

Caps made of PE feature a long skirt and a super-fast thread design allowing them to be removed or sealed with a single turn. Caps are designed with flexible sealing lip which provides leakproof seal.

Supplier: Spectrum Laboratories

These are used in combination with a standard closure for a vertical use of the dialysis tubing and a magnetic stirrer for continuous stirring of the tubing.

Supplier: United Scientific Supplies

Secure caps to lids of microcentrifuge tubes with these autoclavable locks.

Supplier: Chemglass

Closure offers two positions, open for gas exchange or closed for humidified environment.

Supplier: Caplugs

A variety of tube cap options to meet needs. Test Tube Caps are overfitting caps for use with culture tubes.