You searched for: Water

Supplier: Electron Microscopy Sciences

EMS reagent grade water is typically prepared at 18 megohm/cm specific resistance using a reverse osmosis, mixed deionization, activated filtration and final filtration at 0.2 microns.

Supplier: HONEYWELL INTERNATIONAL INC MX

For HPLC and spectrophotometry. UV cutoff 190nm.
Not ACS Certified

Supplier: Honeywell Research Chemicals

Water, for HPLC, CAS Number: 7732-18-5, CHROMASOLV* Plus, Molar Mass: 18.02 g/mol, High Purity Solvent, Liquid Chromatography, Size: 1L

Supplier: G-Biosciences

G-Biosciences' Proteomic-Grade Water is suitable for 2D electrophoresis and mass spectrometry analysis. Removes worries of protien and dust contamination and improves quality and reproducibility of 2D electrophoresis and mass spectrometry results.

Supplier: RPI

DI water (ASTM TYPE II).

Supplier: Teknova

Molecular Biology Grade Water is PCR certified negative for DNAse and RNAse (sensitivity to femtomoles) and is negative for non-specific Endonuclease, Exonuclease and Protease activity.

Supplier: Baxter

Solutions for irrigation.

Supplier: Honeywell Research Chemicals

Water, Tested for UHPLC-MS, CAS Number: 7732-18-5, CHROMASOLV* LC-MS Ultra, Linear Formula: H2O, Molar Mass: 18.02 g/mol, High Purity Solvent, UHPLC-MS, Size: 1L

Supplier: Honeywell Research Chemicals

High purity Water; suitable for LC-MS applications and spectrophotometry. Contains no preservative.

Supplier: NURSE ASSIST, INC.

Water USP for irrigation, sterile

Supplier: Lonza

AccuGENE™ Molecular Biology Water is ideal for a wide range of molecular biology applications. 18 megOhm water is filtered using a 0.2 micron filter, and filled into sterile bottles.

Supplier: Antyila Scientific

Ideal for field calibration 'on the go'.

Supplier: Ricca Chemical

Suitable for molecular and cell biology specifications.

Supplier: Ricca Chemical

Water, USP Purified Sterile Filtered (Water for Injection Quality) is expertly purified by reverse osmosis and sterile filtration. No antimicrobial agents or other substances have been added to this water.

Supplier: Teknova

Reagent Grade Water meets the standard for ASTM TYPE with a resistance of 18 megaohms then purified by glass distillation, ion exchange, a charged carbon adsorption column and undergoes reverse osmosis, UV treatment and sterile-filtration with 0.1 micron filter.

Supplier: BAXTER SALES & DISTRIBUTION IN

Solutions for irrigation.

Supplier: Honeywell Research Chemicals

HIGH PURITY SOLVENTS, LC-MS GRADE SOLVENTS

Supplier: Teknova

DNase, RNase and Protease tested Teknova Cell Culture Grade Water.

Supplier: BeanTown Chemical

CAS: 7732-18-5; EC No: 231-791-2; MDL No: MFCD00011332 Liquid; Molecular Formula: H2O ; MW: 18.02 Melting Point: 0°; Boiling Point: 100° Density (g/mL): 1; Refractive Index: 1.333

Supplier: BeanTown Chemical

CAS: 7732-18-5; EC No: 231-791-2; MDL No: MFCD00011332 Liquid; Molecular Formula: H2O ; MW: 18.02 Melting Point: 0°; Boiling Point: 100° Density (g/mL): 1.000; Refractive Index: 1.333

Supplier: SPEX CERTIPREP LLC

Supplier: BeanTown Chemical

CAS: 7732-18-5; EC No: 231-791-2; MDL No: MFCD00011332 Liquid; Molecular Formula: H2O ; MW: 18.02 Melting Point: 0°; Boiling Point: 100° Density (g/mL): 1; Refractive Index: 1.333

Supplier: Burdick & Jackson

ACS GENERAL USE SOLVENTS

Supplier: SPEX CERTIPREP LLC

Calibration and Matrix Blanks

Supplier: Thermo Fisher Scientific

Thermo Scientific Pierce Water, LC-MS Grade is an ultrapure, LC-MS grade preparation with low UV-absorptivity that makes it suitable and reliable for use in HPLC and mass spectrometry applications.

Supplier: Adipogen

DdWater Endotoxin-free (sterile), Endotoxin Content: <0.0002EU/ug, after repeated purification cycles over activated charcoal, Synonyms double-distilled Water, Synonyms double-distilled Water, Short/Long Term Storage: +4 deg C, Size: 1.5ml

Supplier: Thermo Fisher Scientific

High purity dH₂O tested for contaminating nuclease activity. Product is 0.2 μm filtered and dispensed into vials and/or durable, square Nalgene bottles. The 5L size is supplied in an upright carton with a convenient dispensing spout.

Supplier: Thermo Fisher Scientific

High purity dH₂O treated overnight with 0.1% Diethylpyrocarbonate. Product is 0.2 μm filtered and dispensed into vials and/or durable, square Nalgene bottles, then autoclaved.

Supplier: ASSOCIATES OF CAPE COD INC MS

LRW is intended for reconstitution of LAL reagents and CSE, and to dilute samples and standards for LAL assays.

Supplier: Avantor Performance Materials

Avantor’s Water for Injection (WFI) quality water can help supplement existing media & buffer preparation processes by providing a reliable, high-quality alternative to in-house water production. Our water for injection quality water is manufactured under cGMP manufacturing guidelines using a multi-effect distillation process, ozone sparge and UV treatment. It is passed through a 0.2 micron filter prior to filling.