You searched for: Toluene
Toluene or methylbenzene is a colorless liquid used as an organic solvent for industrial purposes. High purity toluene suitable for histology and cytology applications, for spectrophotometry and organic residue analysis is available in sealed glass bottles and steel cans. The aromatic hydrocarbon stored in ambient temperature has the smell associated with paint thinners.
Toluene ≥99.5% ACS, VWR Chemicals BDH®
Supplier: VWR International
Suitable for histology and cytology applications.
Expand 3 Items
Toluene ≥99.8%, HiPerSolv CHROMANORM® for HPLC, VWR Chemicals BDH®
Supplier: VWR International
Toluene ≥99.8%, HiPerSolv CHROMANORM® for HPLC, VWR Chemicals BDH®
Expand 1 Items
Toluene ≥99.5%, extremely low particle, CMOS, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIALS US
Toluene ≥99.5%, extremely low particle, CMOS
Expand 1 Items
Toluene ≥99.8% (by GC, corrected for water content), UltimAR® for liquid chromatography, for UV spectrophotometry, Macron Fine Chemicals™
Supplier: AVANTOR PERFORMANCE MATERIALS US
Toluene, UltimAR®
Expand 1 Items
Toluene ≥99.5% (by GC), BAKER ANANYZED™ ACS
Supplier: AVANTOR PERFORMANCE MATERIALS US
Lot analysis on label.
Expand 6 Items
Toluene ≥99.5% (by GC), CMOS for microelectronic, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIALS US
Toluene ≥99.5% (by GC), CMOS for the electronics industry, J.T.Baker®
Expand 1 Items
Toluene ≥99.7% (by GC, corrected for water content), BAKER ULTRA RESI-ANALYZED® for organic residue analysis, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIALS US
For organic residue analysis.
Expand 2 Items
Toluene ≥99.7% (by GC, corrected for water content), BAKER ANALYZED® HPLC for HPLC, UHPLC, for spectrophotometry, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIALS US
Packaged under nitrogen. For use in high performance liquid chromatography. UV cutoff 285nm. Lot analysis on label.
Expand 3 Items
Toluene ≥99.7% (by GC), ChromAR® for liquid chromatography, for UV spectrophotometry, Macron Fine Chemicals™
Supplier: AVANTOR PERFORMANCE MATERIALS US
Especially intended for use as an HPLC and TLC solvent. Filtered through a 0.2µm element.
Expand 1 Items
Toluene ≥99.5% (by GC), AR® (ACS) ACS analytical reagent, Macron Fine Chemicals™
Supplier: AVANTOR PERFORMANCE MATERIALS US
ACS—Reagents meeting the requirements of the American Chemical Society Committee on Analytical Reagents. The specifications listed in this catalog are based on the ACS Reagent Chemicals Tenth Edition.
Expand 2 Items
Toluene ≥99% (by GC), EMPLURA®, Supelco®
Supplier: MilliporeSigma
For full details of specification and hazards please see www.vwr.com or the VWR Chemicals catalogues
Expand 5 Items
Toluene ≥99.9%, OmniSolv®, Supelco®
Supplier: THOMAS SCIENTIFIC INC MX
For spectrophotometry, HPLC, gas chromatography, and residue analysis. Filtered through a 0.2µm filter. UV cutoff 285nm. Lot analysis on label.
Expand 4 Items
Toluene, EMPARTA® for analysis, Supelco®
Supplier: MilliporeSigma
Emparta*Toluene for analysis, ACS grade, Cas number: 108-88-3, Chemical Formula:C6H5CH3, Solvent, 4l.
Expand 1 Items
Toluene, EMPARTA® ACS for analysis, Supelco®
Supplier: MilliporeSigma
Grade ACS , Cas Number 108-88-3
Expand 2 Items
Toluene, LiChrosolv® for liquid chromatography, Supelco®
Supplier: MERCK, S.A. DE C.V. SV
Offering a high degree of UV transmittance, low particle count, low acidity and alkalinity, and low evaporation residue level, LiChrosolv® solvents are ideal for reproducible separations. They are produced from specially selected raw materials, and undergo a number of purification steps prior to final packaging. Since separations are normally carried out under gradient conditions in analytical HPLC, Merck Millipore offer solvents in ’gradient grade’ as well as ’isocratic grade’. This enables you to minimise the gradient effect of the solvent involved.
Expand 3 Items
Toluene ≥99.5% (by GC), GR ACS, Supelco®
Supplier: MilliporeSigma
Meets ACS Specifications, Meets Reagent Specifications for testing USP/NF monographs.
Expand 6 Items
Toluene ≥99.9% (by GC), EMSURE® ACS, ISO, Reag. Ph. Eur. for analysis, Supelco®
Supplier: MilliporeSigma
Cas Number: 108-88-3, Grade: ACS ,ISO,Reagent pH Eur, 4L
Expand 6 Items
Toluene, anhydrous ≥99.5%, DriSolv®, Supelco®
Supplier: MilliporeSigma
Clear and free of particulates. Suitable for use in organic synthesis and other anhydrous solvent applications.
Elbow adapter with septum cap (EM-692004-2) allows for the removal of solvent under nitrogen atmosphere. Replacement septum (EM-692004S-2), for use with elbow adapter, minimizes air and moisture intrusion once the primary septum is punctured. Drying tube (EM-692010-2) filled with t.h.e.« desiccant indicating silica gel removes solvent under a dry-air atmosphere. Large plug (EM-692012-2) is a replacement plug for bottle top.
Expand 3 Items
Toluene ≥99.8%, SupraSolv® for GC-MS, distilled, Supelco®
Supplier: MilliporeSigma
SupraSolv® MS is dedicated for use in gas chromatography coupled with mass spectrometric detection. SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results. This method is used e. g. for the analysis of dioxins and furans (PCDD/PCDF) in food and water samples or for the determination of PAH (polycyclic aromatic hydrocarbons) in food.
Expand 2 Items
Toluene, SupraSolv® for GC-ECD/FID, Supelco®
Supplier: MilliporeSigma
SupraSolv® ECD and FID is specially developed for gas chromatography in combination with ECD (Electron Capture Detetor) and FID (Flame Ionization detector). SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results.
Expand 2 Items
Toluene, Uvasol® for spectroscopy, Supelco®
Supplier: MilliporeSigma
Accurate analytic results in UV/VIS and infrared spectroscopy depend on the use of very pure solvents for sample preparation. The Uvasol® solvents range has been specially designed for spectroscopy and other applications requiring solvents of the highest spectral purity. The refinement process allows a greater degree of security in applications and avoids misinterpretation of analytical results caused by traces of UV, IR and fluorescence contamination. Uvasol® solvents offer best UV transmittance. In all specifications the minimum transmittance for 5 typical wavelengths are identified. Furthermore the transmittance is specified in accordance with Reag. Ph Eur and ACS.
Expand 1 Items
Toluene ≥99.9%, BioSyn™ for biosynthesis, for applications requiring low water content, Burdick & Jackson™
Supplier: Burdick & Jackson
Toluene ≥99.9%, BioSyn™ for biosynthesis, for applications requiring low water content, Burdick & Jackson™
Expand 1 Items
Toluene 99.5% ACS for spectroscopy
Supplier: Thermo Scientific Chemicals
Toluene 99.5% ACS for spectroscopy
Expand 3 Items
Toluene 99+%, Extra Pure
Supplier: Thermo Scientific Chemicals
Toluene 99+%, extra pure
Expand 5 Items
Toluene ≥99.8%, B&J Brand™ for HPLC, for spectrophotometry, Burdick & Jackson™
Supplier: Burdick & Jackson
Honeywell Burdick & Jackson B&J Brand Toluene Is A High Purity Solvent Suitable For Hplc And Spectrophotometry. Packaged In 56L Stainless Steel Pressure Dispense System (Sspds) Containers That Are Returned For Refill. Sold Only Under Contract.
Expand 2 Items
Toluene 99.85% for HPLC
Supplier: Thermo Scientific Chemicals
Toluene 99.85% for HPLC
Expand 2 Items
Toluene 99.85% for pesticide residue analysis
Supplier: Thermo Scientific Chemicals
Toluene 99.85% for pesticide residue analysis
Expand 1 Items
Toluene 99+% for spectroscopy
Supplier: Thermo Scientific Chemicals
Toluene 99+% for spectroscopy
Expand 2 Items
Toluene 99.8+% for analysis
Supplier: Thermo Scientific Chemicals
Toluene 99.8+% for analysis