Methanol
Methanol, LiChrosolv® for UHPLC-MS
Supplier: Avantor
Methanol, Cas number: 67-56-1, Hill Formula: CH4O, Molar Mass: 32.04 g/mol, Boiling point: 64.5 degree C (1013 hPa), Density: 0.792 g/cm3 (20 degree C), Flash point: 9.7 degree C Ignition temperature: 420 degree C, Melting Point: -98 degree C, Size: 2l
Expand 1 Items
Methanol, SupraSolv® for GC-MS, Supelco®
Supplier: MilliporeSigma
SupraSolv® MS is dedicated for use in gas chromatography coupled with mass spectrometric detection. SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results.
Expand 2 Items
Methanol, SupraSolv® for GC-ECD/FID, Supelco®
Supplier: MilliporeSigma
SupraSolv® ECD and FID is specially developed for gas chromatography in combination with ECD (Electron Capture Detetor) and FID (Flame Ionization detector). SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results.
Expand 3 Items
Methanol ≥99.9%, OmniSolv® for purge & trap, Supelco®
Supplier: MilliporeSigma
For use in the preparation of volatile organic standards.
Expand 1 Items
Methanol, anhydrous ≥99.8% (by GC), GR ACS ACS, Supelco®
Supplier: THOMAS SCIENTIFIC INC MX
Meets ACS Specifications, Meets Reagent Specifications for testing USP/NF monographs
Expand 4 Items
Methanol, anhydrous (max. 0.003% H₂O), Seccosolv® analytical reagent, Supelco®
Supplier: MilliporeSigma
These reagents are produced using specially selected distillation methods that ensure consistently high dryness and batch-to-batch consistency. To protect the quality of these products even better from potential contaminants, a septum seal cap provides multiple layers of protection to keep solvents in flawless condition before, during, and after removal.
Expand 2 Items
Methanol ≥99.8% (by GC), GR ACS ACS, meets analytical specification for testing USP/NF monographs, Supelco®
Supplier: MilliporeSigma
Meets ACS Specifications, Meets Reagent Specifications for testing USP/NF monographs.
Expand 8 Items
Methanol ≥99.9%, OmniSolv®, gradient grade for HPLC, Supelco®
Supplier: MilliporeSigma
Suitable for use in spectrophometry and HPLC and gas chromatography. Gradient controlled for absence of lipophilic interferences at 254 and 235nm. UV cutoff 203nm. Certificate of Analysis on label.
Expand 4 Items
Methanol ≥98% (by GC) for histology, Supelco®
Supplier: MilliporeSigma
Used as a fixative for hematology and a substitute for ethanol.
Expand 3 Items
Methanol ≥99.8% (by GC), EMPARTA® ACS for analysis, Supelco®
Supplier: MilliporeSigma
Methanol ≥99.8% (by GC), EMPARTA® ACS for analysis, Supelco®
Expand 3 Items
Methanol ≥99.5%, OmniSolv® for pesticide residue analysis, Supelco®
Supplier: THOMAS SCIENTIFIC INC MX
Tested for use in gas chromatography and residue analysis.
Expand 1 Items
Methanol, anhydrous ≥99%, DriSolv®, Sigma-Aldrich®
Supplier: MilliporeSigma
Clear and free from particulates. Suitable for use in organic synthesis and other anhydrous solvent applications. Elbow adapter with septum cap (EM-692004-2) allows for the removal of solvent under nitrogen atmosphere. Replacement septum (EM-692004S-2), for use with elbow adapter, minimizes air and moisture intrusion once the primary septum is punctured. Drying tube (EM-692010-2) filled with t.h.e.* desiccant indicating silica gel removes solvent under a dry-air atmosphere. Large plug (EM-692012-2) is a replacement plug for bottle top.
Expand 2 Items
Bio-Methanol (Gas-to-Liquid) ≥99.85% (by GC) for synthesis, Sigma-Aldrich®
Supplier: MilliporeSigma
Bio-Methanol (Gas-to-Liquid) ≥99.85% (by GC) for synthesis, Sigma-Aldrich®
Expand 1 Items
Methanol ≥99.9% (by GC), LiChrosolv® Reag. Ph. Eur., gradient grade for liquid chromatography, Supelco®
Supplier: MilliporeSigma
Methanol gradient grade, suitable for UPLC and UHPLC.
Expand 3 Items
Methanol, LiChrosolv® for liquid chromatography, Supelco®
Supplier: MilliporeSigma
Offering a high degree of UV transmittance, low particle count, low acidity and alkalinity, and low evaporation residue level, LiChrosolv® solvents are ideal for reproducible separations. They are produced from specially selected raw materials, and undergo a number of purification steps prior to final packaging. Since separations are normally carried out under gradient conditions in analytical HPLC, Merck Millipore offer solvents in ’gradient grade’ as well as ’isocratic grade’. This enables you to minimise the gradient effect of the solvent involved.
Expand 3 Items
Methanol, LiChrosolv®, hypergrade for LC-MS, Supelco®
Supplier: MilliporeSigma
LiChrosolv® hypergrade is accurately tested for LC-MS suitability, and meet all the requirements of modern LC-MS ionization methods (ESI/APCI - positive and negative mode).
Expand 2 Items
Recommendations will be personalized based on your shopping preferences only if you have given your consent by enabling "Enhance my Shopping Experience" on the "Personal Info page".
Otherwise, you will receive generic recommendations.