You searched for: 2-Propanol

Supplier: MilliporeSigma

HPLC, Meets ACS Specifications, Meets Reagent Specifications for testing USP/NF monographs

Supplier: MilliporeSigma

LiChrosolv® hypergrade is accurately tested for LC-MS suitability, and meet all the requirements of modern LC-MS ionization methods (ESI/APCI - positive and negative mode).

Supplier: THOMAS SCIENTIFIC INC MX

Suitable for spectrophotometry, HPLC, GC, and residue analysis. UV cutoff at 204nm. Filtered to remove particulate matter. Certificate of Analysis on label.

Supplier: THOMAS SCIENTIFIC INC MX

Used as a dehydrating fluid and for microwave oven applications.

Supplier: Thermo Scientific Chemicals

2-Propanol 99.5+%

Supplier: MilliporeSigma

Accurate analytic results in UV/VIS and infrared spectroscopy depend on the use of very pure solvents for sample preparation. The Uvasol® solvents range has been specially designed for spectroscopy and other applications requiring solvents of the highest spectral purity. The refinement process allows a greater degree of security in applications and avoids misinterpretation of analytical results caused by traces of UV, IR and fluorescence contamination. Uvasol® solvents offer best UV transmittance. In all specifications the minimum transmittance for 5 typical wavelengths are identified. Furthermore the transmittance is specified in accordance with Reag. Ph Eur and ACS.

Supplier: THOMAS SCIENTIFIC INC MX

Meets ACS Specifications, Meets Reagent Specifications for testing USP/NF monographs.

Supplier: Thermo Scientific Chemicals

2-Propanol 99.5% for analysis

Supplier: MilliporeSigma

Supplier: MilliporeSigma

Supplier: MilliporeSigma

SupraSolv® ECD and FID is specially developed for gas chromatography in combination with ECD (Electron Capture Detetor) and FID (Flame Ionization detector). SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results.

Supplier: MilliporeSigma

Prepsolv® solvents are tailored to the requirements of preparative Chromatography to facilitate scale up from analytical to preparative separations. With their extremely low evaporation residue (< 1 mg/L) and low water content, they ensure optimal protection for columns.

Supplier: Thermo Scientific Chemicals

2-Propanol 99+%, meets analytical specification of Ph.Eur.

Supplier: Ricca Chemical

Isopropanol; isopropyl alcohol. CAS RN 67-63-0. Formula Weight: 60.09. Aqueous solution, 70% (v/v). For laboratory cleaning and disinfection purposes. Non-sterile. Not for medicinal use. Subject to postal/shipping restrictions. 20L.

Supplier: Thermo Scientific Chemicals

MDL: MFCD00011674 Beilstein Registry No.: 635639

Supplier: Epredia

Epredia™ HiPur™ Dedyrants are histological grade and anhydrous.

Supplier: MilliporeSigma

Flammable.
Elbow adapter with septum cap (EM-692004-2) allows for the removal of solvent under nitrogen atmosphere. Replacement septum (EM-692004S-2) for use with elbow adapter minimizes air and moisture intrusion once the primary septum is punctured. Drying tube (EM-692010-2) filled with t.h.e.* desiccant indicating silica gel removes solvent under a dry-air atmosphere. Large plug (EM-692012-2) is a replacement plug for bottle top.

Supplier: Honeywell Research Chemicals

2-Propanol, Purity: 69 - 71 %, Grade: Reagent, Cas number: 67-63-0, Molecular Formula: C3H8O, Molar mass: 60.11 g/mol, Density: 0.858 g/mL, Synonyms: Isopropanol; 2-Propanol; 2-Propanol solution; IPA; Isopropyl alcohol, 70% in H2O, General purpose reagent, Size: 1L

Supplier: Burdick & Jackson

For HPLC, liquid and gas chromatography, pesticide residue analysis, spectophotometry, organic synthesis and combinatorial chemistry.

Supplier: MP Biomedicals

2-Propanol ACS

Supplier: Honeywell Research Chemicals

High purity solvents for speciation analysis by LC-ICP-MS. Rigorous purification procedures followed by UV spectroscopy, IC, and ICP-MS testing to assure high chemical purity and high UV transmittance. The blank values for metal traces in these solvents are in the ppb range or lower.

Supplier: Ricca Chemical

2-Propanol 10% (v/v) in aqueous solution

Supplier: Thermo Scientific Chemicals

2-Propanol, extra dry 99.8%, AcroSeal™

Supplier: BeanTown Chemical

CAS: 67-63-0; EC No: 200-661-7; MDL No: MFCD00011674; RTECS: NT8050000 UN No: UN1219; Haz Class: 3; Packing Group: II Liquid; Linear Formula: (CH3)2CHOH ; Molecular Formula: C3H8O; MW: 60.10 Melting Point: -90°; Boiling Point: 82°; Flash point: 12°C (54°F) Density (g/mL): 0.785; Refractive Index: 1.377

Supplier: BeanTown Chemical

CAS: 67-63-0; EC No: 200-661-7; MDL No: MFCD00011674; RTECS: NT8050000 UN No: UN1219; Haz Class: 3; Packing Group: II Liquid; Linear Formula: (CH3)2CHOH; Molecular Formula: C3H8O; MW: 60.10 Melting Point: -90°; Boiling Point: 82°; Flash point: 12°C (54°F) Density (g/mL): 0.785; Refractive Index: 1.377

Supplier: Thermo Scientific Chemicals

2-Propanol 70% in water, Technical Grade

Supplier: KMG

IPA is used to rinse silicon wafers and to leave a clean dry residue free surface usually after organic stripping solutions.

Supplier: BeanTown Chemical

CAS: 67-63-0; EC No: 200-661-7; MDL No: MFCD00011674; RTECS: NT8050000 UN No: UN1219; Haz Class: 3; Packing Group: II Liquid; Linear Formula: (CH3)2CHOH; Molecular Formula: C3H8O; MW: 60.10 Melting Point: -90°; Boiling Point: 82°; Flash point: 12°C (54°F) Density (g/mL): 0.785; Refractive Index: 1.377

Supplier: Honeywell Research Chemicals

2-Propanol, Cas number: 67-63-0, Molecular Formula: (CH3)2CHOH, Molar mass: 60.11 g/mol, Synonyms: 2-Propanol, sec-Propyl alcohol, IPA, Isopropanol, Isopropyl alcohol, Meets USP testing specifications, Pharma Solvent, General Use, Size: 500ML

Supplier: Honeywell Research Chemicals

2-Propanol (Isopropyl alcohol, Isopropanol, IPA) is a colorless solvent and is the simplest example of a secondary alcohol. It is moderately polar and has a boiling point of 82 °C. 2-Propanol dissolves a wide range of non-polar compounds and evaporates quickly. Thus, it is used widely as a cleaning fluid, especially for dissolving oils. Suitable for HPLC , spectrophotometry, GC and residue analysis.