You searched for: Acetonitrile

Supplier: Thermo Scientific Chemicals

Acetonitrile 99+% for spectroscopy

Supplier: Thermo Scientific Chemicals

Acetonitrile 99.6% ACS

Supplier: MilliporeSigma

Supplier: MilliporeSigma

SupraSolv® MS is dedicated for use in gas chromatography coupled with mass spectrometric detection. SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results. This method is used e. g. for the analysis of dioxins and furans (PCDD/PCDF) in food and water samples or for the determination of PAH (polycyclic aromatic hydrocarbons) in food. Also commonly used in QuEChERS pesticide residue analysis.

Supplier: Thermo Scientific Chemicals

Acetonitrile 99.5% for analysis

Supplier: Thermo Scientific Chemicals

Acetonitrile 99.9% for residue analysis

Supplier: MilliporeSigma

Prepsolv® solvents are tailored to the requirements of preparative Chromatography to facilitate scale up from analytical to preparative separations. With their extremely low evaporation residue (< 1 mg/L) and low water content, they ensure optimal protection for columns.

Supplier: Thermo Scientific Chemicals

Acetonitrile 99+%, extra pure

Supplier: MilliporeSigma

Supplier: Thermo Scientific Chemicals

Acetonitrile 99.9%, ECD tested for residue analysis

Supplier: Honeywell Research Chemicals

Acetonitrile, ACS Reagent, HPLC, Spectrophotometry, CAS number: 75-05-8, Structural formula: CH3CN, Molecular weight: 41.05, Meets USP Reagent Specification, Form: liquid, Color: colourless, Odor: sweet ether-like, Boiling point (C): 81.6, Freezing point (C): -43.8, Size: 200L

Supplier: Thermo Scientific Chemicals

99% 500ML

Supplier: MP Biomedicals

This colourless liquid is the simplest organic nitrile (hydrogen cyanide is a simpler nitrile, but the cyanide anion is not classed as organic). It is produced mainly as a byproduct of acrylonitrile manufacture.
Acetonitrile is widely used as a polar aprotic solvent in organic synthesis and in the purification of butadiene in refineries.
This solvent is often the preferred choice as a mobile phase in HPLC for a variety of reasons. Not only is it miscible with water and with many other organic solvents, but it also has a lower viscosity and produces less pressure in the column than other solvents such as Methanol. The inherent low absorbance of Acetonitrile (especially HPLC grade) makes it the preferred solvent for the mobile phase of HPLC due to the reduction in the amount of noise during UV detection. Overall, Acetonitrile has many unique properties as an organic mobile phase that often result in better chromatographic peaks.
Acetonitrile also plays an important role as the main solvent used in the manufacture of DNA oligonucleotides from monomers.
Room Temperature, store under nitrogen.

Supplier: Honeywell Research Chemicals

Acetonitrile, Cas number: 75-05-8, Formula: CH3CN, Molecular weight: 41.05, Synonym: Methyl Cyanide, Cyanomethane, Low Water, is suitable for DNA/RNA synthesis and extremely low water content, Physical state: liquid, Color: colourless, Meets UV Specifications, Size: 200 L

Supplier: Thermo Scientific Chemicals

Acetonitrile 99.9% ACS, gradient grade, meets analytical specification of Ph.Eur. for HPLC

Supplier: Honeywell Research Chemicals

BioSyn* Acetonitrile, Cas number: 75-05-8, Formula: CH3CN, Molecular weight: 41.05, Synonym: Methyl Cyanide, Cyanomethane, Low Water, is suitable for DNA/RNA synthesis and extremely low water content, Physical state: liquid, Color: colourless, Size: 1250 L (IBC)

Supplier: Thermo Scientific Chemicals

Acetonitrile 99.9%, meets analytical specification of Ph.Eur. for HPLC, far-UV

Supplier: Honeywell Research Chemicals

Acetonitrile UV, CAS number: 75-05-8, Structural formula: CH3CN, Molecular weight: 41.05, high purity solvent suitable for HPLC and spectrophotometry, Synonym: Methyl Cyanide, Cyanomethane, Form: liquid, Color: colourless, Meets UV Specifications, Size: 200L SSPDS

Supplier: Honeywell Research Chemicals

For HPLC, liquid and gas chromatography, pesticide residue analysis, spectophotometry, organic synthesis and combinatorial chemistry.

Supplier: Honeywell Research Chemicals

BioSyn« products are ideal for DNA, RNA and oligonucleotide synthesis. All solvents and regents are filtered (0.2-micron) and tested for oxidation reage.

Supplier: Thermo Scientific Chemicals

Acetonitrile ≥99.5% ACS

Supplier: Thermo Scientific Chemicals

Acetonitrile

Supplier: Thermo Scientific Chemicals

Acetonitrile, Purity: 99.8%, CAS Number: 75-05-8, molecular formula: CH3CN, color: Colorless, Form: Liquid, Synonyms: Methyl cyanide, 1l

Supplier: Thermo Scientific Chemicals

Acetonitrile, extra dry 99.9+%, AcroSeal™

Supplier: BeanTown Chemical

CAS: 75-05-8; EC No: 200-835-2; MDL No: MFCD00001878; RTECS: AL7700000 UN No: UN1648; Haz Class: 3; Packing Group: II Liquid; Linear Formula: CH3CN; MW: 41.05 Melting Point: -48°; Boiling Point: 81-82°; Flash point: 2°C (36°F) Density (g/mL): 0.786; Refractive Index: 1.344

Supplier: Thermo Scientific Chemicals

Acetonitrile for LC-MS

Supplier: Aladdin Scientific

Acetonitrile ≥99.8%

Supplier: BeanTown Chemical

CAS: 75-05-8; EC No: 200-835-2; MDL No: MFCD00001878; RTECS: AL7700000 UN No: UN1648; Haz Class: 3; Packing Group: II Liquid; Linear Formula: CH3CN; MW: 41.05 Melting Point: -48°; Boiling Point: 81-82°; Flash point: 2°C (36°F) Density (g/mL): 0.786; Refractive Index: 1.344

Supplier: BeanTown Chemical

CAS: 75-05-8; EC No: 200-835-2; MDL No: MFCD00001878; RTECS: AL7700000 UN No: UN1648; Haz Class: 3; Packing Group: II Liquid; Linear Formula: CH3CN; MW: 41.05 Melting Point: -48°; Boiling Point: 81-82°; Flash point: 2°C (36°F) Density (g/mL): 0.786; Refractive Index: 1.344

Supplier: BeanTown Chemical

CAS: 75-05-8; EC No: 200-835-2; MDL No: MFCD00001878; RTECS: AL7700000 UN No: UN1648; Haz Class: 3; Packing Group: II Liquid; Linear Formula: CH3CN; MW: 41.05 Melting Point: -48°; Boiling Point: 81-82°; Flash point: 2°C (36°F) Density (g/mL): 0.786; Refractive Index: 1.344