You searched for: Fume Hoods and Enclosures

Supplier: Labconco

The durable, stainless steel-lined Protector® Evidence Drying Cabinet provides a secure ventilated area to dry evidence such as clothing and bedding

Supplier: Labconco

The patented RXPert Single Filtered Balance System is a Class I Enclosure that meets the USP<800> requirements for non-sterile compounding

Supplier: Labconco

The Basic™ hood is ideal for rooms with ceilings below 2.4 m, 8" and for shallow countertops.

Supplier: Kewaunee

These modified epoxy resin worktops are available with or without a 5.1cm (2") diameter vent hole

Supplier: Labconco

Guardian Airflow Monitors are designed to continuously monitor airflow through Labconco fume hoods

Supplier: Labconco

Laboratory hoods feature sashes on two sides that, when mounted in an island or peninsular configuration, provide unobstructed viewing from either side during chemistry demonstrations or observing students using the hood

Supplier: Labconco

High performance fume hoods with integrated sash sensors for automatic multi-speed blower control.

Supplier: Labconco

Designed for classroom use, these lightweight hoods feature an epoxy-coated aluminum frame with tempered safety glass front sash, sides, rear baffle, and top.

Supplier: Labconco

Combine with a base stand or cabinet to support Fiberglass 30 and Basic™ Labconco® laboratory hoods.

Supplier: Bel-Art Products, a Part of SP

Designed for small facilities or installations in which fume hoods are needed, this unit is excellent for use in schools, junior colleges and universities.

Supplier: Labconco

The newly redesigned, patented Protector® XStream® Laboratory Hood was engineered to be the best containing fume hood possible

Supplier: Labconco

The AtmoSense™ Oxygen monitor is designed for general purpose trace oxygen detection as low as 1 ppm.

Supplier: Environmental Express

Maintain clean air for more uniform digestions.

Supplier: Labconco

The CApture™ Portable Fuming System quickly fixes latent fingerprints at the crime scene using microburst or traditional CA fuming methods, while protecting the user from hazardous fumes

Supplier: Labconco

The CApture™ BT is a spacious benchtop Cyanoacrylate (CA) evidence fuming chamber with a durable, easy-to-clean stainless steel liner

Supplier: Labconco

Bulk powder stations are designed to protect the user from airborne particulates and fumes generated during powder transfer operations

Supplier: Labconco

Bulk powder systems keep airborne particulates and fumes contained during powder transfer procedures

Supplier: Labconco

Designed for the needs of histologists and pathologists, these workstations rid the lab of dangerous organic solvent fumes, such as formaldehyde and xylene, and restore clean air

Supplier: Plas-Labs

Fume hoods feature horizontal and vertical Venturi airfoils to assist in the complete extraction of dangerous fumes

Supplier: Labconco

IV bar for Logic, mounting hardware and four hangers (two short and two long). Installation required.

Supplier: Labconco

SoLo™ hydraulic base stand for Labconco Class II Biosafety cabinets, optic white.

Supplier: Yamato Scientific

Self-contained units ideal for use handling fine powders, chemicals and biological products.

Supplier: Erlab

Erlab’s Captair Ductless Filtering Fume Hoods and Powder Weighing Stations are 100% ductless, meaning no HVAC connection to the outside is required. Some models can be placed on mobile bases to be wheeled around, or shared between laboratories. The units offer end users protection from particulate, and or liquid handlings. Units are also cleanroom compliant with HEPA at the exhaust. Customers can weigh down to six decimal places without interruption of the scale.

Supplier: WaterSaver Faucet

Since isotope hoods do not have interior access panels, they require a front load fitting that can be accessed from outside the hood

Supplier: Eagle Group

Stainless steel laboratory exhaust canopies are used to exhaust laboratory work spaces.

Supplier: Analytik Jena US

These PCR UV hoods bring together UV irradiation and antimicrobial stainless steel and aluminum to create a dual-attack environment against PCR contaminations.

Supplier: Labconco

Enclosures provide a controlled environment in which to perform polymerase chain reaction (PCR) procedures

Supplier: Labconco

PuriCare Open Access Stations offer the utmost efficiency for cage changing operations

Supplier: Labconco

Protects your non-hazardous applications with horizontal unidirectional (laminar) ISO Class 4 air across the work area.

Supplier: Labconco

During procedures such as nanoparticle manipulation and dry powder chemical handling, enclosures keep hazardous powders and particulates contained