Supplier: New ERA Enterprises

An inexpensive way to handle corrosive samples that may react with the glass sample tube.

Supplier: New ERA Enterprises

Tubes offer the convenience of a screw cap with the security of a PTFE/silicone seal.

Supplier: New ERA Enterprises

These sample tubes are useful for air-moisture sensitive samples, organometallics, kinetics, and other samples requiring carefully controlled environments.

Supplier: Invitrogen

Thermo Scientific™ Pierce™ Low Protein Binding Microcentrifuge Tubes (2.0 ml) help minimize protein sample loss during sample manipulation and are ideal in applications where processing steps are extensive. Able to tolerate centrifuge speeds up to 20000.

Supplier: New ERA Enterprises

A 50 mm section of 5 mm Ext.Ø tubing is sealed to a sample tube. The extra tubing allows the tube to be secured in the tip-off adapter with ample length for safe flame sealing. A uniform constriction, with a 2 mm Int.Ø is placed just above the 7" length.

Supplier: CELLTREAT SCIENTIFIC PRODUCTS MS

Centrifuge tubes with graduations printed in bold, easy-to-read black ink and are accurate to ±2%.

Supplier: EPPENDORF NORTH AMERICA MS

These safe-lock tubes protect the sample with excellent centrifugation stability, feature optimized sealing properties, and reliably prevent sample evaporation.

Supplier: New ERA Enterprises

Precision thin wall NMR Sample Tubes feature a valve for air/moisture sensitive samples.

Supplier: COVARIS INC MS

These tubes are suitable for sample collection, storage, pulverization, and transfer.

Supplier: Invitrogen

For fast, effective protein and peptide hydrolysis.

Supplier: New ERA Enterprises

All large volume NMR sample tubes are made of type 1, class A borosilicate glass (Pyrex or equivalent), unless otherwise noted.

Supplier: New ERA Enterprises

This basic style washer is an economical, convenient and effective way to clean NMR sample tubes.

Supplier: Cole Parmer

Designed to amplify nucleic acids during the PCR process.

Supplier: Norell Inc

These NMR tubes are manufactured out of ASTM Type 1 Class A glass, commonly referred to as Pyrex® 7740 (Corning), Duran® (Schott Glass), or Kimax® KG-33 (Kimble) glass.

Supplier: New ERA Enterprises

Micro tubes are designed for use with reduced sample volumes in cryo/cold probes as well as micro and all standard 5 mm probes.

Supplier: Precision Medical Devices

Designed for the transport of urine, serum, or other biological materials.

Supplier: New ERA Enterprises

Tubes are specifically designed for QC, routine analysis and research applications.

Supplier: Bio-Rad

Titertube® 1 ml micro test tubes allow efficient preparation and storage of large numbers of samples in an 8×12 format. Unsterilized Tubes and racks are made of polypropylene; they are autoclavable to 120 °C and freezable to –80 °C.

Supplier: Bio-Rad

To fit centrifuges, 2 ml tubes have thinner walls than standard tubes and are intended for short runs at less than 13000 ×g. Heavy samples, high g forces, long runs, or centrifuges that radiate excess heat may damage these tubes.

Supplier: New ERA Enterprises

Improved design allows for increased sample volume while maintaining adequate wall thickness to help reduce breakage. For use in all 3 mm micro probes.

Supplier: New ERA Enterprises

A precision inner cell for use with 5 and 10 mm thin-wall NMR tubes.

Supplier: Invitrogen

PP, translucent.

Supplier: Norell Inc

Manufactured from ASTM Type 1 Class B glass.

Supplier: AB SCIEX LLC MS

Microvials can be used as vial inserts for small volume sample introduction into the CESI 8000 Plus, PA 800series, and P/ACE™ MDQ systems.

Supplier: Diagenode

TPX® Polymethylpentene (PMP) tubes are designed to improve sonication and shearing efficiency.

Supplier: COVARIS INC MS

microTUBE made of AFA fiber with pre-slit snap-cap.

Supplier: Invitrogen

Single-Use RED (rapid equilibrium dialysis) Plate is composed of disposable high-density polypropylene and is pre-loaded with 48 equilibrium dialysis membrane inserts. Each insert is comprised of two side-by-side chambers separated by an O-ring-sealed vertical cylinder of dialysis membrane with varying molecular-weight cutoffs (8 or 12 kD MWCO).

Supplier: Invitrogen

The Slide-A-Lyzer® MINI Dialysis Device Floats are low-density polyethylene rafts designed to securely hold up to 25 Slide-A-Lyzer® MINI Dialysis Devices to permit array dialysis.

Supplier: MTC BIO BE

These centrifuge tubes are designed to stay sealed for 10 to 15 minutes when samples are boiled at 100 °C.

Supplier: Watson Bio Lab

These hyper microtubes feature a writing space, a locking mechanism, and a friendly hinge for fingers.