You searched for: Microplate Seals

Supplier: VWR International

Identical to polyester films above, but including a colour dot and white writing area on each end tab for plate identification.

Supplier: VWR International

50 µm polyolefin films with 50 µm inert encapsulated silicone adhesive. Especially suited for qPCR, storage and protein crystallisation applications. The encapsulated silicone adhesive is non tacky until pressed against the sealing surface, at which time adhesive is released only in sealing areas to form the strongest available heat resistant seal around each well on the plate.

Supplier: VWR International

Aluminium foils, 75.7 µm thick, for use with 96- or 384-well plates. Fit inside the rim of raised rim plates. These foils have one partial-width end tab. Available non sterile only.

Supplier: VWR International

These films are 240 µm thick white vinyl with adhesive, for use with white microplates.

Supplier: VWR International

Transparent polyester films with strong, non absorbing, non fluorescing, medical grade adhesive for superior performance in qPCR applications. Supplied non sterile.

Supplier: VWR International

1x8 adhesive sealing strips are ideal for use with 1x8 strip-well ELISA plates.

Supplier: VWR International

The SealMate SealPlate Starter Kit features a re-usable dispenser and two sterile rolls of perforated film.

Supplier: Corning

Easy application and removal for short and long-term storage. Provides tight seal to minimise evaporation and condensation.

Supplier: AZENTA US, INC

This seal is designed as a low-cost sealing option, and useful for temporary storage and as a cover for applications such as centrifugation.

Supplier: Corning

Axygen AxyMat sealing mats can be used in a wide range of temperatures for PCR and storage applications.

Supplier: SPEX

Cole-Parmer®, Microplate seal, Mat (96 wells), Single sheet/mat/strip, Sealing mat for square 96-well reinforced microplate (2205-50), Silicone

Supplier: MP Biomedicals

Acetate plate sealers are not gas permeable and not autoclavable.

Supplier: MP Biomedicals

This microplate sealing tape is suitable for all microplates for both short- and long-term storage, providing a tight seal to minimize evaporation and condensation.

Supplier: AZENTA US, INC

These strips of 8 flat crystal clear optical caps are designed for low volume applications such as low volume qPCR.

Supplier: AZENTA US, INC

The aluminum heat sealing foil is resealable, peelable, pierceable, suitable for compound storage and PCR. Suitable for short term storage.

Supplier: Thermo Fisher Scientific

These caps are for use with 0.5 ml U96, 0.45 ml V96, and 1.0 ml and 2.0 ml deep well polypropylene plates.

Supplier: Eppendorf

Secure your samples with confidence using Eppendorf® Sealing mats, the ideal solution for incubation and short-term storage needs. These reusable mats can be autoclaved and come in a 'PCR Clean' purity grade (free of RNase, DNase, Human DNA and PCR inhibitors).

Supplier: Agilent Technologies

Certified for use with the PlateLoc Thermal Microplate Sealer.

Supplier: AZENTA US, INC

These clear polypropylene sealing caps, available as strips of 8 caps (domed or flat optical) and strips of 12 caps (flat optical) are molded from virgin polypropylene and are compatible with our tube strips and 96 well PCR plates.

Supplier: Excel Scientific

The dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Cost-effective replacement rolls are sold separately.

Supplier: Corning

Sealing films are ideal for 96-well, 384-well, deep well, and other assay and PCR plates.

Supplier: Cytiva

Seals are used to control humidity and reduce evaporation of samples. They prevent spills and contamination.

Supplier: Excel Scientific

The dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Cost-effective replacement rolls are sold separately.

Supplier: Thermo Scientific

These sealing mats are placed directly on the microplate by hand or with an applicator.

Supplier: Chemglass

SealMate™ system provides a convenient method for sealing standard-format microplates with adhesive films

Supplier: Antyila Scientific

Supplier: MP Biomedicals

Acetate plate sealer is easy to apply and remove from microplates. In addition, this microplate sealing tape is suitable for all microplates for both short and long term storage, providing a tight seal to minimize evaporation and condensation.

Supplier: Corning

Axygen microplate heat sealing films are designed for applications ranging from PCR and Real-Time PCR to storage.

Supplier: Excel Scientific

These sealing films are 203 m thick white vinyl films with 37m acrylic adhesive for use with white microplates. The sealing films may be applied to either the top or bottom of the plate.

Supplier: Thermo Fisher Scientific

Vinyl sealing tape with pressure sensitive acrylate adhesives provide a secure seal on all polystyrene, polypropylene, and polycarbonate microplates (including 384- and 1536-well plates).