You searched for: Embedding Cassettes

Supplier: StatLab

Pathflow PiSmart laser cassettes are a two piece design with a rear hinge and front tab closure. Threaded cassettes come in stacks of 40 cassettes, and 50 stacks per case of 2000.

Supplier: Electron Microscopy Sciences

The CellSafe™ is a disposable plastic biopsy insert consisting of two hinged interlocking plastic frames with an integral nylon mesh.

Supplier: Electron Microscopy Sciences

This section offers you a simple system of stainless steel well bars, chucks and freezing blocks, kept cold in cryostat, allow you to perform a variety of precision embedding techniques addressing the most difficult embedding tasks with ease and minimum time needed. 20 to 60 seconds needed to freeze (depending on the well size). Multiple samples handled quickly with no monitoring necessary (for placement of heat extractor). Precise flat or on edge embedding, predictable orientation, liquid samples easily embedded and no crush artifact caused by heat extractor weight. Reduce tissue waste with less trimming the result of flat plane of embedding. Minute samples embedding in the same plane.  Less cryostat adjustments necessary, comfortably preformed on a shelf just inside most cryostats. Easy to use and saves time.

Supplier: Simport Scientific

Molded from a high-density acetal polymer, these cassettes keep specimens safely submerged in liquid and are totally resistant to the chemical action of histological solvents

Supplier: Bio Plas

Histology Embedding Rings provide a quick and easy way to uniformly embed tissues for further processing.

Supplier: Simport Scientific

Made of acetal and resistant to the chemical action of most histological solvents and suitable for automated printers.

Supplier: Leica Biosystems

IP Biopsy II Cassettes are one-piece biopsy cassettes that are supplied taped for easy loading in a Leica IP cassette printer.

Supplier: Sakura Finetek

The Tissue-Tek® Uni-Cassette® standard cassette system is utilized to provide specimen identification and security from the grossing station to the paraffin block. In these systmes smooth, single-action fracture-back hinges are present for greater protection. The LWS (Large Writing Surface) Uni-Cassette® are used when a larger writing front surface is needed.

Supplier: Electron Microscopy Sciences

The Via-Cell® bioaerosol sampling cassette is designed to collect both viable and non-viable bioaerosols, maintain visibility of the viable mold spores and prevent growth during transport to the laboratory. It is the first disposable cassette impactor with multiple analysis options that brings simplicity and reliability to viable bioaerosol sampling.

Supplier: Electron Microscopy Sciences

Biopsy processing cassettes with four square compartments each measuring 13 mm.

Supplier: Simport Scientific

These polystyrene containers are half-filled with 10% neutral buffered formalin

Supplier: Electron Microscopy Sciences

We are proud to offer a multi-compartment container in the shape of a dish and half prefilled with 10% Neutral buffered Formalin, for holding and transporting biopsies

Supplier: StatLab

Pathflow PiSmart Laser Cassettes are a two piece design with a rear hinge and front tab closure.

Supplier: Leica Biosystems

ActivFlo Routine I cassettes are processing cassettes featuring a patented lateral vent design for maximum fluid exchange.

Supplier: StatLab

Two-piece design with a separate lid and square 0.9 mm pores.

Supplier: Electron Microscopy Sciences

The anterior printing area is a 45° angle which suits most cassette labeling instruments

Supplier: Electron Microscopy Sciences

The strainers are available in the sizes of 35, 40, 70 and 100 microns.

Supplier: Sakura Finetek

The stacked arrangement of the cassettes makes easy to load on Tissue-Tek® AutoWrite® Cassette Printer

Supplier: Electron Microscopy Sciences

The system includes four Blocklock modules which can be fixed to mounting panels for 3-ring binders or can be stored into Blocklock storage boxes.

Supplier: Simport Scientific

Made of acetal and resistant to the chemical action of most histological solvents and suitable for automated printers.

Supplier: Leica Biosystems

IP ActivFlo Biopsy III cassettes feature a patented “Fluidic Flow" pore design for maximum reagent exchange.

Supplier: Leica Biosystems

ActivFlo Biopsy II cassettes feature a patented “Fluidic Flow” pore design for maximum reagent exchange.

Supplier: General Data Healthcare

These cassettes are specifically made for use with the ID/Positive laser cassette markers.

Supplier: Leica Biosystems

IP ActivFlo Biopsy I cassettes feature a patented “Fluidic Flow" pore design for maximum reagent exchange. With a 0.67 mm pore size, the cassettes include an innovative V-shape pore design that pulls fluid in and forces air out.

Supplier: Electron Microscopy Sciences

Lids are packed separately

Supplier: Leica Biosystems

These routine tissue cassettes are designed to keep specimens safely submerged in liquid and are resistant to the chemical action of solvents used in histology labs.

Supplier: Simport Scientific

Suitable for hoppers accepting plastic sleeves, these cassettes will load in cassette labeling instruments in one simple operation. The QuickLoad™ sleeve loads directly into the hopper and is ready for printing.

Supplier: Simport Scientific

The Simport CryoSette™ is designed for frozen tissue collection, transport and storage. It can also be used for storing a multitude of other specimens in all laboratories. The robust design of the cryosette ensures that tissue morphology will be well preserved.

Supplier: Electron Microscopy Sciences

Ideal for prostate, brain, breast tissue and eyes.

Supplier: StatLab

Pathflow PiSmart laser cassettes are a two piece design with a rear hinge and front tab closure. Threaded cassettes come in stacks of 40 cassettes, and 50 stacks per case of 2000.