You searched for: Adapters, Joints with Tube Connectors
Adapters have joints with tube connections in various configurations to fit any reaction system. These bent or straight adapters are fabricated from borosilicate glass to provide a leak-proof fit with other glass instruments. Some models are designed for use as a vent or for the introduction of vacuum or pressure, while others have reinforced taper outer joints and hose connections with a stopcock plug. Fitted disk adapters prevent solids from being introduced into the system.
Vacuum Filtration Adapters, Chemglass
Supplier: Chemglass
Adapters are available in two bottom configuations and four top configurations.
Expand 9 Items
Inlet Adapters, with Hose Connection, Chemglass
Supplier: Chemglass
With a serrated hose connection for vacuum or for the introduction of gases.
Expand 2 Items
Adapters, Flow Control, Chromatography, Rodaviss® Joints, Chemglass
Supplier: Chemglass
Flow adapter for use with CG-1192 and CG-1193 chromatography columns along with CG-1194 reservoirs.
Expand 2 Items
Airfree® Schlenk Connecting Adapters, with Frit, Chemglass
Supplier: Chemglass
Adapter has a coarse frit sealed between the #15 O-Ring joint and the standard taper inner joint.
Expand 2 Items
Universal Inlet Adapters, Chemglass
Supplier: Chemglass
These universal adapters have a thread at the top for a compression cap and o-ring.
Expand 2 Items
Synthware Flow Control Adapters with Metering Stopcock, 90° Angle, Kemtech America
Supplier: Kemtech America
Provides on/off control with the main valve and allows delivery of preset volumes of gases or liquids to reactions using the needle valve.
Expand 3 Items
Synthware Flushing Adapters, Kemtech America
Supplier: Kemtech America
The flushing adapter is used to flush and fill attached vessels.
Expand 2 Items
Synthware Flushing Adapters, Kemtech America
Supplier: Kemtech America
The flushing adapter is used to flush and fill attached vessels.
Expand 3 Items
Adapter, pH Probes, Chemglass
Supplier: Chemglass
Adapter permits pH electrode to be inserted either directly into smaller reactors or down through a baffle.
Expand 1 Items
Flow Control Adapter, PTFE Stopcock, 90°, Chemglass
Supplier: Chemglass
Flow control adapter, used to regulate the flow of gases or liquids into reaction systems.
Expand 1 Items
Hose Inlet Adapters, 1/4"-28, DWK Life Scineces
Supplier: DWK Life Sciences (KIMBLE)
Unique design adapts GPI threaded glass to a serrated PTFE hose connection or 1/4"-28 tubing connections.
Expand 2 Items
Outer Luer Ground Joints, Chemglass
Supplier: Chemglass
Outer joints are manufactured to the same specifications found on medical and research syringes.
Expand 3 Items
Synthware Inlet Adapters, Fritted, Kemtech America
Supplier: Kemtech America
An extra-coarse disc prevents solids from being introduced into the reaction system during liquid transfer.
Expand 3 Items
Ground Joints, with Extended Drip Tubes, Chemglass
Supplier: Chemglass
Inner joint with a sealed-on lower tube extending 6" below the grind.
Expand 2 Items
Flow Control Adapters, 90°, with PTFE Stopcock, Chemglass
Supplier: Chemglass
Used to regulate the flow of gases or liquids into reaction systems.
Expand 3 Items
Airfree® Schlenk Hose Adapters, Chemglass
Supplier: Chemglass
Adapters for use with manifolds such as (80060-120) through (80060-128) to permit port connection to standard rubber hose.
Expand 8 Items
Vacuum Take-Off Vertical Adapter, Chemglass
Supplier: Chemglass
Adapter features standard taper top outer and lower inner joints with sealed in drip tip.
Expand 4 Items
Synthware Reservoirs, Chromatography, Rodaviss® Joints, Kemtech America
Supplier: Kemtech America
Reservoir has a top 24/40 or 45/50 Rodaviss® outer joint for use with flow controller and the appropriate size lower inner joint.
Expand 2 Items
Synthware Adapter, Inlet or Thermometer, Microscale, Kemtech America
Supplier: Kemtech America
This is a joint adapter suitable for microscale applications.
Expand 1 Items
Synthware Adapter, Vacuum Takeoff, Threaded, Microscale, Kemtech America
Supplier: Kemtech America
This is a vacuum takeoff joint adapter suitable for microscale applications.
Expand 1 Items
Adapter, Rotary Evaporator Bump Trap, R200 and R205, Chemglass
Supplier: Chemglass
Vapor tube/bump trap adapter is designed to be used with the Buchi® R-200/205 rotary evaporators.
Expand 1 Items
Synthware U-Shaped Adapters, Kemtech America
Supplier: Kemtech America
Adapters are manufactured from Synthware glass.
Expand 1 Items
Airfree® Schlenk Thermocouple Gauge Adapter, Chemglass
Supplier: Chemglass
A (0 to 12 mm) Chem-Vac™ Chem-Cap® valve with an O-Ring joint for connection to the right-hand side of (80064-398) vacuum manifold.
Expand 2 Items
90° Flow Control Adapters with Fluoropolymer Resin Stopcock, Chemglass
Supplier: Chemglass
This adapter is desgined to regulate the flow of gases or liquids into reaction systems.
Expand 3 Items
Synthware Inlet Adapters, Long Stem, Kemtech America
Supplier: Kemtech America
These inlet adapters feature a long stem.
Expand 2 Items
Reservoirs, Chromatography, Rodaviss® Joints, Chemglass
Supplier: Chemglass
Reservoir for use with chromatography columns (CG-1192 and CG-1193).
Expand 8 Items
Synthware Outer Joint Adapters with PTFE Stopcock, Kemtech America
Supplier: Kemtech America
Use this outer joint adapter with stopcock for regulating the flow of gases or liquids into reaction systems.
Expand 3 Items
Flow Control Adapters, 90°, with Glass Stopcock, Chemglass
Supplier: Chemglass
Flow control adapters, used to regulate the flow of gases or liquids into reaction systems.
Expand 4 Items
Bottom Drip Adapter for Big Columns, Two Filters, Ace Glass Incorporated
Supplier: Ace Glass
This end-fitting adapter fits large columns with #80 Ace-Thred connections.
Expand 2 Items
Rotary Evaporator Adapters, Vial, Chemglass
Supplier: Chemglass
Adapters permit the connection of standard laboratory dram vials directly to the vapor tube or bump trap of a rotary evaporator.