You searched for: Adapters
The adapters come in standard joint sizes that are compatible with most equipment. Used in reaction systems to regulate the flow of gases or liquids, adapters are typically fabricated from high-quality borosilicate glass for tight connections with other glassware. Offered in a variety of different joints and flange shapes, the right adapter for specific systems is easy to find. Adapters may include tube connectors to use in pressure or vacuum apparatus.
Gas Inlet Adapter, with Hose Connection, Chemglass
Supplier: Chemglass
Gas inlet adapter with a tube extending 200 mm below the inner joint.
Expand 1 Items
Adapter, Flow Control, Standard Taper Joints, Chemglass
Supplier: Chemglass
Flow control adapter for use with CG-1188 and CG-1189 chromatography columns along with CG-1190 reservoirs.
Expand 1 Items
Synthware Anti-Splash Adapters with Fritted Disc, Modified, Kemtech America
Supplier: Kemtech America
Anti-splash adapters prevent possible contamination from evaporator.
Expand 2 Items
Adapter, Glass Stopcock, Chemglass
Supplier: Chemglass
Used to regulate the flow of gases or liquids into reaction systems.
Expand 1 Items
Ground Joints, Outer, Full Length, with Rings, Chemglass
Supplier: Chemglass
Standard taper outer joints tooled with reinforcing rings.
Expand 4 Items
Flow Control Adapters, PTFE Metering Stopcock, 90°, Chemglass
Supplier: Chemglass
Used to regulate the flow of gases or liquids into reaction systems.
Expand 2 Items
Synthware Flow Control Adapters with Metering Stopcock, Kemtech America
Supplier: Kemtech America
Adapter has a metering stopcock between top and bottom [ST] joints to permit flow control of fluids between apparatus.
Expand 1 Items
Vacuum Adapter, with PTFE Stopcocks, Chemglass
Supplier: Chemglass
Vacuum adapter has a ground glass standard taper outer joint on top that provides a convenient leak-free way to connect to disposable long stem filter funnels and a taper inner joint or vial.
Expand 4 Items
Inlet Adapters, with Hose Connection, Chemglass
Supplier: Chemglass
With a serrated hose connection for vacuum or for the introduction of gases.
Expand 2 Items
Synthware Flow Control Adapters with Metering Stopcock, 90° Angle, Kemtech America
Supplier: Kemtech America
Provides on/off control with the main valve and allows delivery of preset volumes of gases or liquids to reactions using the needle valve.
Expand 3 Items
Synthware Drying Tube Adapters, Straight, Kemtech America
Supplier: Kemtech America
Drying tube adapters are used for keeping a reaction vessel free of moisture.
Expand 3 Items
Adapters, Pressure Vessel, Chemglass
Supplier: Chemglass
Adapter permits rotary evaporation of the contents of any pressure vessels after the reaction is complete.
Expand 2 Items
Inlet Feeds, Chemglass
Supplier: Chemglass
Inlet feed tubes feature a bore stopcock PTFE.
Expand 2 Items
Synthware Reservoirs, Chromatography, Rodaviss® Joints, Kemtech America
Supplier: Kemtech America
Reservoir has a top 24/40 or 45/50 Rodaviss® outer joint for use with flow controller and the appropriate size lower inner joint.
Expand 2 Items
Outer Luer Ground Joints, Chemglass
Supplier: Chemglass
Outer joints are manufactured to the same specifications found on medical and research syringes.
Expand 3 Items
Specialty Joints, Chemglass
Supplier: Chemglass
These joints offer the glassblower the opportunity to construct an apparatus made of heavier tubing or without unnecessary seals.
Expand 10 Items
Reservoirs, Chromatography, Rodaviss® Joints, Chemglass
Supplier: Chemglass
Reservoir for use with chromatography columns (CG-1192 and CG-1193).
Expand 8 Items
Ground Joints, with Extended Drip Tubes, Chemglass
Supplier: Chemglass
Inner joint with a sealed-on lower tube extending 6" below the grind.
Expand 2 Items
Outer Ground Joints, Full Length, with Rings, Chemglass
Supplier: Chemglass
Standard taper outer joint tooled on the same size tubing as the CG-100 inner joints.
Expand 2 Items
Outer Ground Joints, with Hooks, Chemglass
Supplier: Chemglass
Outer joint with two hooks 180° apart just below the grind.
Expand 3 Items
Medium Length outer Ground Joints, Chemglass
Supplier: Chemglass
Standard taper outer joint tooled on the same diameter tubing as the medium inner joints.
Expand 2 Items
KIMBLE® BEVEL-SEAL™ Connecting Adapters, DWK Life Sciences
Supplier: DWK Life Sciences (KIMBLE)
Connects to vacuum systems, NMR tubes, photochemical cuvettes, lyophilizing tubes, flowmeters, and more.
Expand 1 Items
Full Length Inner Ground Joints, Chemglass
Supplier: Chemglass
Standard Taper ground inner joints, full length.
Expand 15 Items
Full Length Outer Ground Joints, Chemglass
Supplier: Chemglass
Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below the joint.
Expand 15 Items
Inner Luer Ground Joints, Chemglass
Supplier: Chemglass
Inner joint manufactured to the same specifications found on medical and research syringes.
Expand 3 Items
Inner Ground Joints, with Hooks, Chemglass
Supplier: Chemglass
Inner joint with two hooks 180° apart just above the grind.
Expand 3 Items
Spherical Joints, Chemglass
Supplier: Chemglass
Special S-40 size ball and sockets for use in repairing Buchi® rotary evaporator components.
Expand 2 Items
Ball Joint Attachment Arms for Micromanipulator
Supplier: WORLD PRECISION INSTRUMENTS LLC
A ball joint attachment Arm for a micromanipulator gives you flexibility and precise positioning options. With a ball joint attachment you can adjust the orientation and angle of the micromanipulator's probe.